Used Metabo Polishing Machine for sale (66,361)

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Ljdjxxaitspfx Ab Aeah

Condition: used, Year of construction: 2009, wheel diameter 300 mm grinding wheel width 50 mm no. of working stations 2 Stück Lasdpfxoz Hz H He Ab Ajh turning speed range - stepless 1.450 / 2.900 U/min voltage 400 V total power requirement 1,6 / 22 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,10 x 0,50 x 1,30 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 090520004

Condition: used, Polishing machine Manufacturer: BAUERRICHTER Type: SL1 1350X3500 Lodpfozuza Esx Ab Ajah Table size: 1400x4000 mm Working area: 1350x3500 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm Lajdpfx Abstx Ubro Ajh - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter. Ledpew Avptjfx Ab Ajah

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots Lsdex D Tbmjpfx Ab Aeah T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Lsdpfeyntrhsx Ab Aoah Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Control cabinet. Three rotary table polishing machines are available.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR Laedpfxez Eh Egs Ab Ash SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: new, functionality: fully functional, Spare parts for machines manufactured in Poland. AFM Andrychow, FUM Poreba, FAT Wrocław, AVIA Warszawa, Jafo Jarocin, ZM Tarnow, FAMOT Pleszew. Spare parts for Polish lathes, including: TUM 25, TUM 35, TUJ 50, TUJ 63, TUJ 560, TUJ 630, TUR 50, TUR 63, TUR 560, TUR 630, TPK 90, TRP 93, TRP 110, TR 115, TR 135. Spare parts for Polish milling machines, including: FND 25, FND 32, FND 40, C20, D36, D40, FF series, FR series. Ledpjum Ixxofx Ab Aoah

Condition: used, functionality: fully functional, Polyservice D2 tribo-finishing machine, equipped with a noise-reduction enclosure and a remote control unit. Lajdpozrpkmsfx Ab Aoh

Condition: new, Year of construction: 2027, Machine for grinding, satin finishing, or polishing flat parts and profiles (finishing profiles, transition profiles, expansion joints, skirting profiles, decorative profiles, stair and terrace profiles, tile trims, edge protection profiles, renovation profiles). Laedog D Rfmjpfx Ab Ajh Benchtop polishing machine / automatic flat polishing machine for parts up to 3,000 mm in length (longer products available upon request). Equipped with one or two processing units. Base machine and control cabinet are new; processing units are used but fully refurbished with new motors. Further information available upon request.

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW Laedodz Uzbopfx Ab Ajh - speed 1420 U/min - working hight is 600 mm - conical shaft

Condition: used, Year of construction: 2010, machine/vehicle number: RPM 1000 ZO, Used robots - Polishing machines P 1000 ZO right-hand design Polishing discs Ø 1000 mm Ledpfsxludljx Ab Ajah With feed and oscillation

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light. Lsdpfx Aoz St Hwob Aoah

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Laedpfx Abjqmfv Se Aeh Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet

Condition: good (used), Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture Lsdpfx Aezmbheb Aeah

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine with granite structure and 16 spindles equipped with marble polishing plates Passage width: 2,200 mm Lsdpfx Abjz D S Ivs Aeah Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC. Ledsz R Rbdepfx Ab Asah

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Lajdpfefiugujx Ab Aeh Drive power: 5.5 kW Polishing disc diameter: 1000 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine in granite configuration with 16 SG-8 spindles Maximum working width: 2,200 mm Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system. Lsdpez D Tamjfx Ab Ajah

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Total length: 12500mm Laodpeiqghzsfx Ab Ajh

Condition: new, -new-Zum sanding from nahezu allen work piece-formen about Bürstwerkzeuge or Lufttrommel(gerade, runde, gebogene Profile etc.)- Massivholzschliff- intermediate lacquer sanding- Bürsten- polishing- different Schleifmittel einsetzbar durch30 mm tool receiver- Optional with variabler rev adjustmentTechnische Daten:motor performance: 2,2 kWrpm: 1000/1500 or 1500/3000 rpmshaft diameter: 30 mmMax. abrasive product: 350 mmSchleifkörperlänge: 275 mmweight: ca. 180 kgArt.-No. 1090-900000inclusive:1 piece rpm infinitely variable adjustable No. 1090-9900102 piece Vario ModularD. 300 mm, B. 250 mmNo. 1090-990107located in  97447 Gerolzhofensale in current condition as seen- free on truck - Laedpovwf Snjfx Ab Aeh

Condition: new, Year of construction: 2025, max. working width 300 mm number of brushing / polishing units 2 st. Feed speed 10 m/min. Laodpfjv Ucilex Ab Aoh Max. diameter of brush / polishing rollers 190 mm motor power per brush / polishing roller 4,65 kw

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Laodpfx Abjz Iz Imj Ash Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2023, 400mm swing, Ledpfx Aez Srv Deb Aoah 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor