Used Mbo Folding Machines And Units for sale (90,008)

Condition: good (used), functionality: fully functional, Year of construction: 1988, sheet width 2500 mm plate thickness 3 mm Nsdpjzxiaujfx Ab Ajdc weight of the machine ca. 1,7 t

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Nedsymm D Ijpfx Ab Aodc Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2000, functionality: fully functional, 4 pockets with MBO SBAP 46 ME, vertical stacker delivery Njdpfx Ajxbpvuob Aedc

Condition: ready for operation (used), Year of construction: 1998, Immediately available, free from insolvency: Motorized swivel bending machine GEKA Type NSJ 1500/2.5 Year of manufacture 1998 Working length 1500 mm Material thickness 2.5 mm Drive power 3 kW Weight 2.5 tons Complete with all accessories Ndodpo Aa Iqrefx Ab Ajc Price: EUR 3,250.00 plus VAT, ex works.

Condition: good (used), Year of construction: 2009, functionality: fully functional, 6 pockets Control unit: Navigator-Control with touchscreen Folding units 1st unit Pockets: 6x Cross fold unit with 2 knives Second knife aligned to: left 1x side pocket Ndsdpfx Asxbpv Uob Aec Noise protection hood with Palamides Alpha 700, year of manufacture: 2007, stack delivery

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers Ndedpfx Abjzt Nbzs Aec - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Ndjdezil Uiopfx Ab Aoc Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, AL-KO POWER UNIT 250 P - Exhibition machine - Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 250 mm, Nominal volumetric flow: 3,534 m³/h, Maximum volumetric flow: 4,900 m³/h, Maximum negative pressure: 3,184 Pa, Filter area: 22.4 m², Chip collection volume: 2 x 250 liters, Number of bags: 2, Motor 400 V: 7.5 kW, Ndodpfx Abj Aaz S No Aoc Dimensions (L x W x H): 2,351 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 758 kg, According to: GS - HO - new exhibition machine -

Condition: good (used), Superfax PF-460 Automatic Folding Machine Made in Japan. Perfect condition, ready to use. This model is very well-equipped, with automatic cassette adjustment, automatic paper size detection, and an automatic feeder. Technical data: Paper size: min: 91×128 mm max: 315×432 mm A6-A3 Weight: 45-160g (max. up to 230g when half-folding) Nedpfx Aboz Rk I Ne Aedc Power supply: 230V Weight: 34kg Detailed specifications: – Automatic folding position setting for the six most popular folds (half-fold, quarter-fold, „Z”, „C”, „altar” fold) – Automatic paper size recognition for six formats (A3, B4, A4, B5, A5, B6) Paper folding speed adjustable from 3,300 to 10,000 sheets per hour Shelf for folded documents Automatic paper feeding system Smooth paper flow thanks to the conveyor belt Folding counter, batch countdown, total count, etc. Automatic stop with a sound signal when all sheets are folded A complex paper jam is signaled by an appropriate sound and a LED indicator.

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Njdpfx Ae Aaz S Aob Aodc Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine Ndodpe Ad Hihsfx Ab Asc This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Thalmann THAKO 30 Working width: 8.20 m Bending capacity: 3.0 mm Njdpeyl Tvusfx Ab Aedc Year of manufacture: 2010 Touchscreen NEW

Condition: used, Zwick Testing Machine Type: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions H x W x D: 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer, 13.5 mm MFA 25 extensometer (temperature range up to +200°C) Computer + testXpert II V3.5 software Climate chamber: Airtemp LKG-K-TK-50 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Nodpfx Abozil Upj Asdc Condition: used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness Njdpsy Umd Sefx Ab Ajdc * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: used, Mosca RO-TRP-4 automatic strapping machine Features: • Can be integrated into any line • Direct conveyor system with frequency control, adjustable from 0.15 – 0.8 m/s • IFM Ecomat 100 control unit with display • Hot-sealing system with electronic heating control • Fully automatic strapping tape threading system • Adjustable strapping distance via the control panel • Adjustable strap tension • Detection of the end of the tape with ejection of the remaining tape • Automatic ejection of the strapping loops in case of incorrect strapping • Structure painted blue – RAL 5010 The passage opening is 74 cm wide and 53 cm high. Nodpfot Srxgsx Ab Aodc Strapping capacity: Up to 46 straps/min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 kVA Weight: 300 kg. You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit Nodpfx Abszuykvo Asdc for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: Ndsdpfx Abjxaa A No Aoc - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Nodpfxjz Dills Ab Ajdc Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Working width 1010 mm Max. sheet thickness 370 N/mm² 1.5 mm Upper beam opening 80 mm Small bending width 10 x s mm Small Inner radius 1.5-2 x s mm Bending beam adjustment approx. 40 mm Max. bending angle 130° Dimensions L x W x H 1650 x 500 x 1400 mm Weight 380 kg Accessories / Special Features: • Upper tool, 45° bending rail • Flat rail on the bending beam • Graduation with stop • Compensating counterweight • Heavy-duty cast iron construction • Easy adjustment of the upper beam via spindle • Versatile Njdpfowg Ru Eex Ab Ajdc • The bending tools are suitable for narrow and wide sheet metal for fine bending • Angle adjustment with graduation • Easy bending thanks to counterweight Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: refurbished (used), Refurbished Multigraf Touchline CF375 Creaser Folder Availability: In Stock Njdpfxo Abaq To Ab Aedc Condition: Fully refurbished - including a new Care Kit B, full new rollers, fold bar, feed belts, and various smaller internal components. Exceptionally low usage, with a lifetime sheet count of just 86,000. Overview The Multigraf Touchline CF375 is a premium creasing and folding system designed to produce professionally finished documents with exceptional accuracy, reliability and ease of operation. Manufactured in Switzerland, the CF375 combines precision engineering with fully automatic setup, making it one of the most highly regarded creaser folders available for commercial print finishing. Designed for commercial printers, digital print providers, universities and corporate print rooms, the Touchline CF375 creases and folds in a single pass while handling a wide variety of coated and uncoated media from 80 to 400gsm. Its patented Swing-Bar creasing system virtually eliminates fibre cracking, while the Pro-Knife folding technology delivers precise, repeatable folds across a broad range of applications. Every refurbished Multigraf Touchline CF375 supplied by Glendale Presentation Solutions is professionally refurbished by our experienced engineers, fully tested and supplied ready for immediate production. Whether you're producing folded brochures, greetings cards, menus or premium marketing literature, the Multigraf Touchline CF375 delivers exceptional finishing quality with minimal operator intervention. Key Features Fully automatic creasing and folding system Top-fed vacuum suction feeder Multigraf Swing-Bar creasing technology Multigraf Pro-Knife folding system Automatic setup via colour touchscreen Crease and fold in a single pass Crease only or fold only operation Up to 20 creases and 2 folds per sheet Processes media from 80–400gsm Sheet sizes from 105 × 148mm up to 375 × 660mm (up to 1,050mm with extension) Production speeds of up to 6,000 sheets per hour High-capacity shingle delivery Job memory for repeat work Choice of standard and narrow crease tools Swiss manufactured Why Choose the Multigraf Touchline CF375? The Multigraf Touchline CF375 has earned an outstanding reputation throughout the print industry for its exceptional build quality, reliability and finishing quality. Manufactured in Switzerland, it combines precision engineering with innovative creasing and folding technology to deliver professional results day after day. Its patented Swing-Bar creasing system produces crisp, professional creases without stopping the sheet, significantly reducing the risk of fibre cracking on digitally printed and coated stocks. Combined with Multigraf's Pro-Knife folding technology, the CF375 delivers accurate folds and excellent registration while maintaining high production speeds. Automatic setup via the touchscreen control panel dramatically reduces make ready times, allowing operators to switch quickly between jobs with minimal manual adjustment. Whether you're producing folded brochures, greetings cards, menus, direct mail or premium marketing literature, the Touchline CF375 delivers the productivity, flexibility and finishing quality demanded by busy print environments.

Condition: used, Mobiles Schwertfalzwerk mit Eigensteuerung / Mobile Knife Folding Unit with SelfControl MBO Z2 Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z2 Year 1995 - Serial-No. 44951206-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 15.000 cycles/h Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Nedpey A S Eksfx Ab Aedc

Condition: used, Year of construction: 2001, The Mathias Baeuerle CAS 52-B is a sophisticated and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, this machine is currently in stock and located in Germany. It features four plates in the first unit and automatic fold plate setting, ensuring accurate and consistent folding. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and electrical double-sheet control to prevent errors. It includes a flat pile feeder for smooth material handling and a MB CAS 52 Multimaster computer-controlled folder, which allows for precise and repeatable folding operations. With a memory capacity for 60 repetitive jobs, the machine can efficiently handle high-volume tasks. The CAS 52-B also features semi-automatic fold roller setting and mobile delivery, enhancing its versatility and ease of use. It can accommodate materials with a size of 520 x 850 mm. Format: 520 x 850 mm Equipment: Njdpowdww Ujfx Ab Aedc 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

Condition: excellent (used), 2008 CIMC 40FT FLATRACK, FLUSH FOLDING TYPE Stackable Tare weight: 5,100 kg Max. payload: 39,800 kg Max. gross weight: 50,000 kg CSC: 12/2027 = Further information = Year of manufacture: August 2008 Nedpfx Abe Aawn Te Ajdc Year of construction: 2008 Model year: 2008 Unladen weight: 5,100 kg Payload: 39,800 kg GVW: 44,900 kg Technical condition: very good Optical condition: very good Please contact Arne Honingh for further information.

Condition: as good as new (ex-display), Year of construction: 2018, Very little used , condition as new ! FORMAT 45 X 90 CM FEEDER: Pile feeder with vacuum belt and automatic device for cleaning the valve. It is equipped with air blasts for spacing the sheets, when there is no suction. Front and side blowers for separating the sheets. Height, positioning, quantity and volume values are all adjustable. LAY REGISTER TABLE: Lay register table with round belts, in lower and upper position, anti-scratching for UV-coated and laminated sheets. CREASING: Die creasing. Easily replaceable matrixes thanks to a bayonet system that enables quick changes in creasing width (Optimum creasing with all paper grammages). DELIVERY: Delivery table for hand collection PROGRAMMING – CONTROLS: Ndsdpfoxwp N Hjx Ab Aec Colour programming touch screen. Digital programmer to set creasing positions and all machine data. Jobs storage. Copy counter. Output counter. Programmable copy divider (batches).

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m Njdpfou Ibzwjx Ab Aedc - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *