Used Martin T 72 A for sale (91,064)

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 930853, WAB Turbula T2C from 1993. The mixer is in very good condition and was serviced by WAB in August 2026. During the service, the circular belts, flat belts, both tensioning pulleys, and the rubber tensioners were replaced with new ones. In addition, the following items are included as new: - 1 set of black rubber tensioners - 2 sets of red rubber tensioners (for heavier loads) - 1 mixing container, 1 liter - 1 mixing container, 2 liters Prjdpfxsz Dx N Ts Af Sjb Furthermore, the original operating manual from WAB and the maintenance log from 08/26 are included.

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Podjvwfiajpfx Af Sorb

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Pjdpfxjz A Hhuo Af Ssrb

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Psdpfxoz Dbp Ne Af Serb Planing width: 500 mm Table height: 850 mm Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Location: Rieth

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Pedpfxezwcl Uj Af Serb Weight: approx 4 T

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Prodpfx Afswwiybe Sjb

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Pedszzkcvopfx Af Ssrb Lifting capacity: 100 kg Lifting height: approx. 155 cm

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Pedpfxor Hr D Nj Af Serb Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: excellent (used), 2 blades Podpfxezvnzrs Af Sorb Working width: 62 cm Working height: 20 cm 5.5 kW motor

Year of construction: 2007, condition: used, Dust jacketing machine Müller Martini Vesta (A710) Year: 2007 The jacketing machine completes the external appearance of the books by precisely and tightly wrapping the jackets and folding in the flaps. Description: - Infeed conveyor - Automatic jacket feeder - Scoring station - Book opening station - Case separation station - Case closing station - Straight delivery - Lay down device: A 440 NE Prsdpfxozxztyj Af Sjb - Excluding pump Max. mechanical speed: up to 3.900 cycles/h Book block format (max): 305 x 390 x 80 mm Book block format (min): 95 x 125 x 10 mm Book thickness (min): 8 mm Jacket size (max): 900 x 390 mm Jacket size (min): 295 x 125 mm Flap width (max): 150 mm Flap width (min): 50 mm

Condition: like new (used), Year of construction: 2003, operating hours: 6,762 h, functionality: fully functional, type of input current: three-phase, Equipment: compressor, documentation/manual, MULLER MARTINI PRESTO SADDLE STITCHING 8 FEEDER + STACKER APOLLO 1540 used, as new conditions, age 2003-2005 composed by STITCHING UNIT 1550 Pedjyylnmjpfx Af Serb NR. 4 DOUBLE KOMPACT FEEDER 1551 NR.1 COVER FEEDER 1528 NR.1 TRIMMER 1522 NR.1 STACKER APOLLO 1540 NR.3 COMPRESSOR RIETSCHLE KTA 80 OPTIONAL: lenght and stitching control small format within 98x60 mm on feeder small format within 98 mm on trimmer

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Predsyync Tepfx Af Ssb Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 34608, total width: 3,700 mm, total length: 7,200 mm, overall weight: 3,500 kg, input voltage: 400 V, input frequency: 50 Hz, Air cushion table with breaker bars – tiltable with support Breaker bars: 3x X Prodpfxez D H A Ij Af Seb 2x Y

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Pedpjzkkcuofx Af Sorb Newall 2 Axis Digital Read Out

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Pjdpfjh U A Evex Af Sjrb Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Predpfxjuix Sge Af Seb Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: excellent (used), Year of construction: 2007, BACHOFEN Turbula T2F Shaker Mixer Predpfx Afeyc R Nys Sob The mixing container is set in three-dimensional motion, subjecting the material to alternating, rhythmically pulsating movements for intensive mixing. Max. volume: container with 2 L capacity Container dimensions: approx. Ø 130 mm x 215 mm Speed is adjusted via a stepped pulley. Manufacturer: Willy A. Bachofen GmbH Year of manufacture: 2002 Space requirement: 50 x 60 x 40 cm

Condition: good (used), Year of construction: 2006, functionality: fully functional, MULLER MARTINI CONCEPTA 5 F Web Offset Printing Machine for Label and Form Printing Manufacturer Müller Martini AG, Zofingen, Switzerland Production Year 2006 • Number of Colours: 5 • Counter: 66 mil. impressions • • UV Printing • UV curing lamp after each printing unit • Maximum printing speed: 365 m/min • 5 printing units • 1 perforating unit • 1 folding unit • Elettra FASTWASH automatic cleaning system • IST UV BLK2 UV curing system • SCAN 3000 web inspection system • Cross-cutting unit • Pedozk I Unepfx Af Sorb Availability immediately Sale Reason closing company Condition of the Machine functional, condition and wear and tear according to its age, well maintainednot in daily production but can be seen running at your request Price on request  

Condition: used, Webster & Bennett 72” V Series Elevating Rail Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Prjdpfx Aozrm Sbef Seb Main motor 40hp Newall 2 Axis Digital Read Out

Condition: used, Year of construction: 2005, operating hours: 35,000 h, Used Bottle Labeling Machine SACMI OPERA RA 720 8T S3 up to 6,000 bph Psdpow Iy Dqefx Af Ssrb The used SACMI OPERA RA 720 8T S3 bottle labeling machine can reach speeds of up to 6,000 bottles per hour. It is an efficient and reliable solution for those who need to label large volumes of bottles quickly and accurately. The SACMI OPERA RA 720 8T S3 machine, built in 2005, is in excellent condition and has recently passed an independent inspection certifying its proper functionality. This means it is in reliable condition and ready for use, guaranteeing optimal performance. The used SACMI OPERA RA 720 8T S3 bottle labeler is equipped with three labeling stations: front, back, and medallion. It also features mechanical adjustment of the adhesive stations, allowing for easy adjustments for precise and customized labeling. How versatile is this used labeling machine? This used SACMI OPERA RA 720 8T S3 is highly versatile: it can work with different bottle sizes and, thanks to the electronically controlled cams, can be programmed to perform as many rotations as necessary. This allows for the application of labels of various sizes on the bottle walls, making it suitable for a variety of production needs. Furthermore, its energy consumption is approximately 6 kW, and the inlet is on the left, making it an hourly machine. The used SACMI OPERA RA 720 8T S3 bottle labeler, up to 6,000 bottles per hour, can also be configured for an optical centering system to be connected to the current electronic cam. This would allow bottles to be oriented and centered according to precise labeling patterns aligned with various bottle wrapping patterns. Many other equipment options can be created to apply new labels to new bottle formats chosen by the prospective buyer.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. • Rotary table: No • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40 Pjdpoy T R Hbefx Af Ssrb

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: Prjdpoz Atcujfx Af Ssb - Commander with touchscreen - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Used Machine Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm Pjdpjzlbqxefx Af Ssrb - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. Prjdpfjg Eglpsx Af Ssb 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE Prsdpfxjzdyx So Af Sob THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.