Used Lu-Ve Evaporator for sale (8,552)

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Lhodszz Sidopfx Ab Aen Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW Ledpfxsyvrtue Ab Ashn TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: used, Year of construction: 2015, operating hours: 8,195 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,960 mm, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, Technical Specifications Lsdjz H Tm Sopfx Ab Aehn * Manufacturer: Linde Material Handling * Model: H25D - 02 * Year of Manufacture: 2015 * Load Capacity: 2,500 kg * Operating Hours: 8,195 h * Mast: Triplex * Lifting Height: approx. 4,700 mm * Free Lift: approx. 1,600 mm * Side Shifter and Fork Positioner * Drive: Diesel * Dead Weight: 3,725 kg Equipment: * Air Conditioning * Heater * Lighting according to STVO (German Road Traffic Regulations) * Triplex Mast * Work Lights: 2 front, 2 rear * Reversing Light * Comfort Seat with Seat Heating * Hydraulic Additional Functions: 3rd and 4th Valve * CE Version Condition * Immediately ready for operation * Recently serviced * Next service due in approximately 900 operating hours * Engine and hydraulics are functioning perfectly * Technically in good condition * Optically well-maintained Price: 16,900 EUR net, negotiable Inspection and test drive possible by arrangement. Loading and transport can be arranged. If you have any further questions, please feel free to write or call.

Condition: used, operating hours: 148 h, number of beds: 30, Operating hours: 148, initial registration: 02/02/2026. Initial registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Max. power 132/180 kW/hp (ISO 14396). Max. power with power management 155/210 kW/hp. Max. torque 750 Nm, with power management 860 Nm. Registered power 148 kW (ISO 14396). Max. power to the PTO 114/155 kW/hp (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. PowerCore engine air filter with coarse dirt extraction. EasyCare cooler package. 305 liter fuel tank. Lhedozpcu Hjpfx Ab Aon

Condition: used, functionality: fully functional, overall weight: 293 kg, volume flow: 369 m³/h, LGL double flux Evaporator for Coldstores Rated capacity at 0C°/-10C°= 50 KW Lhodpfxjztbypo Ab Aen 5 x fans 450 mm diam.,4 pole Tube content: 49L Fin spacing: 7mm Coils anticorrosion treated w. blygold

Condition: used, functionality: fully functional, A set of 24 industrial axial fans from an active shipyard operation. The set mainly includes large axial fans with protective grilles (see photo), as well as two blue/black high-performance blowers. Suitable for: - Ventilation of halls/workshops Lodpezawhwefx Ab Aehn - Drying of components, paint booths, renovation sites - Ventilation of construction sites, tunnels/tanks - Event technology, cooling, emergency ventilation - Shipbuilding / shipyards Preferably sold as a set (entire lot). Individual units can be sold separately by arrangement (approx. 100 EUR per unit). All devices are functional, with minor signs of wear typical for shipyard use. Originates from the shipyard operation of Strela Shiprepair GmbH (Stralsund). Technical data: - Quantity: 24 units - Design: Axial fan with protective grille - Application: Industry / construction / shipbuilding / event technology - Storage: in wire mesh box (included) - Connection: 230 V / 400 V (mixed assortment, check on site) Collection / Transport: Self-collection in Stralsund. Wire mesh box (steel) included on request. Shipping via freight forwarder on pallets by arrangement (several pallets). Total price 2,400 EUR net, negotiable, for all 24 units + wire mesh box; individual sale approx. 100 EUR/unit. Contact: [NAME], Tel. [TELEPHONE], [EMAIL]

Condition: used, functionality: fully functional, mileage: 706,829 km, first registration: 06/2016, fuel type: diesel, empty load weight: 7,815 kg, overall weight: 18,000 kg, tire condition: 80 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 6,120 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, fog lights, navigation system, retarder, VOLVO FH13.500 Globetrotter Semi-trailer tractor unit 4x2 Front suspension: leaf springs – Rear suspension: air suspension Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg – Tare weight 7,815 kg – Permissible total weight 44,000 kg Total truck length 6.12 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires: 80% tread ABS Euro 6 600L tank Side skirts Aluminum wheels Sun visor Fog lights Central locking Air-suspended driver's seat Air conditioning Navigation system Electric windows and exterior mirrors Lhodpfx Abszx Ardo Ajn Radio All information subject to change without notice. Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Lhjdpfx Absy T I U Ao Aon Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V Lhedpfx Abjy Av H Ss Ajn • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Year of construction: 2012, condition: used, Teas Wrap Around Evaporator (2012) Lodpfjz I R R Rjx Ab Aohn Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Extraction table, welding and grinding table with electric height adjustment The ISI Flow Desk 2000 E extraction table is a height-adjustable workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 2880 m³/h Work surface W/D in mm: W 1990 / D 824 Work height in mm: H 638-938 mm Table load: 200 kg/m (wood, with evenly distributed load) Work surface: Wood slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 2000 / D 1100 / H 938 (optional L = 1000/1500 mm available) Fan power: without fan Operating voltage: 1 x 230 V, 50 Hz Pipe connection: D = 251 mm Color: RAL 7042 / RAL 7011 Weight: 191 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. The table is designed for both standing and seated work with full knee clearance, focusing on ergonomics. For even more efficient work, the extraction table offers a wide range of optional accessories: - Back wall, side walls, and ceiling – optionally with soundproofing and lighting - Slats made of wood, steel, stainless steel, or plastic - Perforated steel plate on top of wood slats - Vise holder - Holder for pipe welding - Spot extraction arm Your advantages of the ISI-Flow Desk series: - 12 device variants available - Piping can be connected on the right, left side, or on both sides - Electric height adjustment at the push of a button Lsdpfezdtwzox Ab Aehn - Wide range of mounting and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Lsdpfx Aezvdftob Aohn

Condition: used, Year of construction: 2008, operating hours: 14,357 h, axle configuration: 4x4, power: 129 kW (175.39 HP), maximum speed: 80 km/h, first registration: 03/2008, color: orange, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, overall weight: 12,000 kg, number of seats: 2, gearing type: other, mileage: 14,358 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Ljdpfx Abjxiyqfe Aohn Subject to change, prior sale and errors.

Year of construction: 2004, condition: excellent (used), The complete line includes: 1. GUSBI – 24 Station rotary table with PU ( polyurethane ) robot applicator. Brand : GUSBI Italy Model : PF24 Serial no. 4625 Year of production : 2004 Number of station : 24 Size of each station : 600mm x 500mm Power – 30 KW Pneumatic – 500nl/min by 8bar Output / shift 8h – 2.000 – 3.500 pcs. – depends on size and quantity filter on each station 2. Automatic Rotary Pleating Machine Brand : SAS Italy Model: PANELFILTER Type : 350/190 Power – 3,5 KW Pneumatic – 6 bar – minimal consumption Year of production 2004 No. of rotary rollers / blades / sets – 8 pcs. - pleat height 20mm - pleat height 28mm - pleat height 32mm - pleat height 36mm - pleat height 38mm - pleat height 40mm - pleat height 48mm - pleat height 53mm - pleat height 60mm Ljdpfx Abegcvc To Ajhn Machine is design ready for trapezoidal pleat pack. 3. Hot Melt dispenser / applicator : Brand : NORDSON USA Type : VA 025-4FFXX4, 400V Model : Versa Blue 8036-189 Serial no. LU04B01511 Year of production 2004 Tank size for HM : 50kg No of heads – 3 Power - 11 KW Pneumatic – 6 bar – minimal consumption 4. Aluminium moulds - 131 pcs. for 100 types of diffrent automotive air panel filters. Additional we offer transfer of know how & trainning.

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, side guards, front supports, rear supports, swing-out tailgates, adjustable drawbar. Body: Tandem 3-sided tipper trailer with aluminum side walls, 2x Gigant axles, drum brakes! Loading ramps available for an additional charge of €990.00 net! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale and errors! Lhodpfezr H Ngjx Ab Aen

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Lhedpfx Asz Ad N Sob Asn Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm)

Condition: ready for operation (used), Gillardon GB 40 VE 40-1100 Drilling Machine, Bench Drill Drilling capacity (steel): approx. 40 mm Drilling capacity (cast iron): approx. 50 mm Threading capacity: M27-M33 Tool holder: MK4 Speed range: 60-1600 rpm (stepless) Feed rate range: approx. 0.1; 0.16; 0.25 mm/rev Albrecht drill chuck: 3-16 mm Spindle stroke: 200 mm Overhang: 350 mm Space requirement: 1200 mm x 800 mm x 2100 mm (L x W x H) You are welcome to visit us for an inspection. We would be happy to arrange an affordable shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Lhsdpfx Aoz H U Hmsb Aon Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: good (used), Schmedt PraMelt OT30 Universal glue PräMelt OT30 Universal is an animal glue for the production of book covers with a relatively long reaction time (for a gel hot melt glue) and medium-fast adhesion. Operating temperature approx. 55 – 60 °C Lhsdpfxswunkyo Ab Aon Weight: 100 kg.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6LUD-321, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik ONE, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Axon LU 620 features: - Siemens Sinumerik ONE - 5-axis simultaneous machining - Heidenhain glass scales in all 5 axes - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar internal coolant system - Air supply through the spindle - Media supply through the center of the table - Automatic workpiece measurement system Renishaw OMP 40 - Laser tool breakage detection system Blum NT A-3 Split - Paper band filter system - Ring flushing system on the spindle - Automatic side door - 60 magazine positions - SK40 - Drag chain chip conveyor - Chip flushing Lhedpfx Abjzdddgj Aen - Dust extraction system

Condition: used, For sale: Compact and powerful MIWE convection oven / bake-off oven. Perfectly suited for shops, gas stations, or smaller bakeries for finishing the baking of fresh products. Equipped with a powerful fan for a perfectly even baking result. Specifications: - Brand: MIWE - Type: Convection oven / Bake-off station - Material: Fully stainless steel Ledpfx Abszklccj Aohn - Features: Large glass door for excellent visibility of the product - Condition: Used For more information or technical details, please contact Bakhortech.

Condition: used, mileage: 604,000 km, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 315/60 R 22.5, axle configuration: 6x2, fuel: diesel, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, second fuel tank, Year of manufacture: 2022 Year of construction: 2022 Tyre size: 315/60 R 22.5 Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90% Rear axle 1: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Rear axle 2: Lift axle; Tyre profile left: 100%; Tyre profile right: 100% Empty weight: 10.000 kg Carrying capacity: 16.000 kg GVW: 26.000 kg = Additional options and accessories = - Air horn - Air suspension - Aluminium fuel tank - Coupling Rockinger - Lock diff - Radio - Refrigerator - Roof and side spoiler - Vehicle heater Lsdpjz A Uf Iefx Ab Aohn - Visor = Remarks = Height floor 98 cm Leather chears

Condition: used, maximum load weight: 29,850 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2019, next inspection (TÜV): 05/2027, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, Year of construction: 2019, Equipment: ABS, Stock no. 5880 Approx. 13.60m Krone flatbed semi-trailer with side sliding tarpaulins and Edscha cover / aluminum rims ----* Manufacturer: Krone * First registration: 05/2019 * Gross vehicle weight: 36,000 kg * Unladen weight according to vehicle registration: 6,150 kg * Payload: 29,850 kg * Axles: 3x BPW with 1st axle as lift axle / disc brakes * Suspension: Air suspension with raising and lowering function * Tires: 385/65 R 22.5 approx. 50% tread on aluminum rims * Color: Chassis black, sliding tarpaulins gray, front and rear black * TÜV (technical inspection): 05/2027 * Volume: approx. 13.60m long x 2.50m wide x 2.78m high * Edscha cover * Side sliding tarpaulins * Screen-printed floor * Front wall with wooden panel * Extendable access ladder on the rear right * Toolbox on the rear left Lhsdpjz Acd Isfx Ab Aen * Continuous mudguards * Full load supports * LED reversing lights * 1st owner German semi-trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or information. We assume no liability for errors, changes or intermediate sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), Xerox Versant 4100 Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) Ledpfx Absychr Ee Ajhn FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Condition: ready for operation (used), Fanuc A06B-6150-H075 amplifier B-65282 SN: V11336539, professionally fully overhauled and tested with a 12-month warranty, 100% functional, scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please inquire about the price separately! Lhjdpfx Absy Np S Ij Asn

Condition: used, empty load weight: 1 kg, maximum load weight: 1 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, next inspection (TÜV): 09/2026, suspension: air, tire size: 385/55 22,5, tire condition: 80 %, color: white, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 42034 Hueffermann, HSA1870 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Alloy wheels * Air suspension * Connector plug, 2x7-pin * Lifting and lowering mechanism Lhedj Aa Ifcspfx Ab Asn * Galvanized * Pneumatic locking system * Inspections: HU/AU (technical inspection/emissions test) valid until 09.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 1 kg * Payload: 1 kg * Permissible gross vehicle weight: 2 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 80% -- 80% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 80% -- 80% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Tank sizes: 5500 mm - 7000 mm (left-hand side) * Upon request, we will gladly send you further pictures. * External dimensions: 9510x2550x1370 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * TÜV inspections, registration services * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.