Used Loadingunit Laser Bystronic 1300 Kg for sale (66,939)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Isdpfx Aksyz Af Esxoar Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, Year of construction: 2000, operating hours: 32,000 h, machine/vehicle number: K000444, degree of automation: semi-automatic, actuation type: electric, laser power: 4,000 W, sheet thickness steel (max.): 18 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 6 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2024, Good day, I am offering for sale a BYSTRONIC ByStar 4020 4.0 kW sheet metal laser cutter with dual exchange tables, each measuring 4000 x 2000 mm, complete with extensive accessories. The laser can also be used as spare parts for other machines. There is a possibility to purchase additional gas resonators for technical gases: oxygen, nitrogen, helium. The BYSTRONIC ByStar 4020 laser, manufactured in 2000 in Switzerland, is designed for precision contour cutting of components made of, among others, stainless steel and aluminum. The laser was operational until April 2025, after which it was switched off and has not been used since. It is stored in a heated facility. Technical data of the laser cutting machine: - Operating hours: Cutting: 32,000 h; Power-on: 80,000 h - Serial number: K000444 - Year of manufacture: 2000 - Laser power: 4 kW (4000 W) - Laser type: CO2 - Working table area (L x W): 4000 x 2000 mm - Cutting thickness range (steel): 0.8–18 mm - Cutting thickness range (stainless steel): 0.8–12 mm - Cutting thickness range (aluminum): 0.8–6 mm The laser comes with: - Extraction unit - Chiller - Laser heads: • 5.5'' for cutting sheets up to 3 mm thick • 7.5'' for cutting sheets up to a maximum thickness of 20 mm - New nozzles: • HK15 – approx. 3 pcs • HK12 – approx. 4 pcs • HK30 – approx. 8 pcs • HK10 – approx. 5 pcs • HK25 – approx. 10 pcs • HK20 – approx. 9 pcs • HK17 – approx. 6 pcs - New lenses: • 5 inch – 1 pc Iaedpfx Akeyzzqmjxjr • 7.5 inch – 2 pcs Additionally, one lens is mounted on each head currently on the machine.

Condition: new, Year of construction: 2025, Laser power: 6000 Watt Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x20 - 350 x 350 mm Max. positioning accuracy X,Y axis: 0,05/1000 mm Max. positioning accuracy U axis: 0,05/1000 mm Max. steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm max. tube weight: 1200 kg Length: 17296 mm Width: 4271 mm Iodpfx Aexgc Arskxoar Height: 2933 mm

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 6100 x 2550 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Iaodpfx Aksyynmroxjr Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: ??? mm Width: ??? mm Height: ??? mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: new, Laser power: 12000 Watt Iodpfx Akoxaykyexoar Working range laser: 6100 x 2050 x 440 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. brass: 25 mm Max. steel: 30 mm Max. stainless steel: 30 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. workpiece weight: 4700 kg Length: 12000 mm Width: 5000 mm Height: 2200 mm Machine weight: 14200 kg Electrical connected load: 62 kW

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm Isdpfxsyzxfns Akxsar - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Delivery time: approx. 6-8 weeks Our commitment is to provide highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameters library is included in the delivery, as well as first-class service. Please also consider our attractive leasing/loan purchase offers. - Machine without automatic shuttle table! Loading takes place on the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of floor space - 6kW laser source from MaxPhotonics (G5/German configuration) - Laser generator with wall-plug efficiency exceeding 30% Iedpfxjxw T Nks Akxoar - Suitable for aluminum - Top quality – book your inspection now! Cutting capacity: - Steel sheet up to 30 mm (maximum) - Stainless steel sheet up to 15 mm (maximum) - Aluminum sheet up to 12 mm (maximum) - Brass sheet up to 8 mm (maximum) - Travel range: 1500 x 3000 mm (for large format) - Machine control system in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows for process observation - Comprehensive cutting parameter library - Incl. nesting module - Very easy to operate - Powerful laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Exhaust filter system optionally available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner. Sale only to commercial customers. Delivery / consulting / sales only within Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need different laser power, table design, or table size? No problem. I would be happy to make you a suitable offer. For example, 2kW machine from 29,990 euro Not sure which laser power suits your application? Of course, I can perform cutting trials according to your requirements. Much is possible here.

Condition: used, tank capacity: 1,251 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanized); handhole diameter approx. 210 mm; 1 container is missing the manhole cover, 2 containers are missing the handhole cover (usually the corresponding tension rings are also missing); 1 container with 2 open, cut connections in the upper cylinder area; 1 container with a dented top head and an external pipeline; this pipeline increases the overall width of this container by approx. 130 mm (see photos) Internal diameter: 1,080 mm Overall width: 1,120 mm Overall height: 1,780 mm Overall length: 1,120 mm Location: Bremen Nameplate: Volume: 1,251 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Iaedpfoyck U Asx Akxer Last application: Chemicals VESSEL Mounting type: Frame EQUIPMENT Manhole / dome: in top head (DN 400), handhole Outlet: DN50 DIN 11851 Note: light residues, signs of use

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: upright Remarks: 1 pipeline inside the tank; heavier internal residues Speed: 100 / 200 RPM Internal diameter: 1,540 mm Total height: 4,600 mm Power: 4.7 / 5.9 kW Agitator: propeller Location: Bremen Nameplate: Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Last application: paint industry TANK Base design: on legs Number of legs: 4 units EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: flange DN80 MATERIAL SPECIFICATION Iajdpfx Aoycluqskxsr Material of legs: stainless steel AGITATOR Voltage: 400 V Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 560 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanised); Handhole diameter approx. 210 mm (one container is missing the handhole cover; this container also has more severe dents (see photos)); ball valves are very stiff to operate (possibly defective) Internal diameter: 1,080 mm Overall width: 1,120 mm Overall height: 1,100 mm Overall length: 1,120 mm Location: Bremen Nameplate: Volume: 560 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: Chemicals TANK Iedpfx Aksyck Upoxoar Supporting structure: Frame EQUIPMENT Manway / Dome: in top head (DN 400), handhole Outlet: DN50 DIN 11851 Note: slight residues, signs of use

Condition: used, tank capacity: 1,255 l, GENERAL Iasdpfx Asyck U Nskxer Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanized); Handhole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection on the manhole cover; Ball valve very stiff (possibly defective) Internal diameter: 1,080 mm Total width: 1,120 mm Total height: 1,700 mm Total length: 1,220 mm Location: Bremen Nameplate: Volume: 1,255 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous use: Chemicals TANK Support type: Frame EQUIPMENT Manhole / Dome: in the top (DN 400), handhole Outlet: DN50 DIN 11851 Note: light residues, signs of use

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Iasdpfx Aoycktrokxsr Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: used, tank capacity: 1,500 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Armaflex insulation in partial areas of the cylinder; manhole approx. 325 x 420 mm; 3 flow breakers and 1 perforated pipe inside the vessel (see photos) Internal diameter: 1,100 mm Total height: 2,700 mm Insulation: available Iajdpfjycixgsx Akxsr Max. overpressure: 6.0 bar Location: Bremen Nameplate: Volume: 1,500 litres Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last intended use: Biochemistry VESSEL Mounting type: Feet Number of feet: 3 pieces INSULATION Insulation material: Armaflex Insulation thickness: 20 mm EQUIPMENT Manhole / dome: in the cylinder Outlet: Flange DN80 MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 80 l, 80 liter pressure tank made of V4A Iedjyfwmkjpfx Akxoar

Condition: excellent (used), Professional workshop crane with counterweight and hydraulic drive. Very good condition, fully operational, ready for use. • Model: Hydrobull HB 500 GK • Manufacturer: E. Ziegler GmbH, Renningen (Germany) • Year of manufacture: 2004 • Lifting capacity: 500 kg • Lifting height: 280 cm • Jib length: 150 cm • Counterweight: 850 kg • Own weight: approx. 1200 kg (350 + 850 kg GG) • Outreach range: A1–A7 (240–500 kg, according to load chart) • Steel construction, mobile on industrial wheels • Hydraulic lifting and lowering of the jib • Technical and visual condition: very good Iodpfx Akoxmt H Isxsar

Condition: ready for operation (used), Year of construction: 2016, operating hours: 549 h, pressing force: 41 t, stroke length: 200 mm, total width: 1,584 mm, total height: 2,449 mm, overall weight: 4,000 kg, travel distance X-axis: 300 mm, travel distance Z-axis: 955 mm, product length (max.): 1,520 mm, number of axes: 6, This 6-axis Bystronic Xpert 40/1030 hydraulic press brake was manufactured in 2016. It features a pressing force of 400 kN and a bending length of 1030 mm, ensuring efficient performance. The machine includes a maximum stroke of 200 mm and an advanced ByVision Bending control system with a 22-inch Full HD touch display. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Number of axes: 6-axis backgauge (Y1, Y2, X, R, Z1, Z2) • R-axis travel: 100 mm • Y-approach speed: 300 mm/s • Y-working speed: 25 mm/s • Open height: 515 mm • Distance between side frames: 1060 mm Iajdpfx Akeyycbqoxsr • Table width: 60 mm • Total connected load: 12 kW • Operating voltage: 400 VAC (3 phase, 50 Hz) • Control voltage: 24 VDC • Nominal current fuse: 32 A • Max. hydraulic pressure: 320 bar • Control system: ByVision Bending with 22-inch Full HD touch display • Stroke: 200 mm • Throat: 0 mm • Press force: 400 KN • Bending length: 1030 mm • Working height: 885 mm • Lower beam width: 120 mm • Crowning: hydr. • Y rapid approach speed: 250 mm/s • Y return speed: 250 mm/s • Main motor power: 7.5 kW • Oil capacity: approx. 100 l • Backgauge: Type P14HA3-HA6 • X-axis travel: 300 mm • Max. backgauge range in X: 500 mm • X-axis accuracy: 0.02 mm • X-axis speed: 1500 mm/s • R-axis travel: 100 mm • R-axis accuracy: 0.1 mm • R-axis speed: 500 mm/s • Z-axis travel: approx. 955 mm • Z-axis accuracy: 0.1 mm • Z-axis speed: 2000 mm/s • X1-axis travel: 0 mm • X1-axis accuracy: 0 mm • X1-axis speed: 0 mm/s • Length (L): 1520 mm • Width (W): 1700 mm • Height (H): 2449 mm • Side frame below floor: 0 mm • Lower beam below floor: 0 mm • Weight: approx. 4 t Additional equipment • Integrated tool storage cabinets • Multiple sets of bending tools (punches/dies) • Ergonomic foot switch Technical Specification Bending Length 1030 mm

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Ijdjyzc Ruepfx Akxsar

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Iasdpfx Akjylx Hroxjr

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Iaodpfsyxccrsx Akxor Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Robust scissor lift table by the renowned German manufacturer FETRA. Ideal for warehouses, workshops, manufacturing, or service applications. ⸻ Iaedoyw Udfepfx Akxjr Technical data: • Load capacity: 500 kg • Maximum height: approx. 100 cm • Tabletop dimensions: 70 x 60 cm • Mechanism: hydraulic (scissor lift) • Operation: foot pedal + manual lowering • Country of manufacture: Germany • Condition: used, fully functional ⸻ Description: The table is stable and very solidly built. Lifting function operates smoothly without sticking. Steel construction, designed for intensive use. It is not mobile for light transport – it is mounted on a work trolley, intended for stationary use or moving short distances only. Shows normal signs of use (scuffs, scratches on the surface), which do not affect the functionality of the equipment. ⸻ • Price specified per unit

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) Iaedpfsyw Ua Tsx Akxjr 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: used, functionality: fully functional, mileage: 835 km, first registration: 12/2017, fuel type: diesel, axle configuration: 4x4, tire size: Vorne: 11.2 R 28, Hinten: 380/80 R 38, next inspection (TÜV): 02/2028, fuel: diesel, driver cabin: other, Year of construction: 2017, operating hours: 878 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, low noise, A robust snow blade for tractors in a heavy-duty industrial design is offered for sale. Iaedpfx Asyhcnfokxjr The blade has been used for winter service and is technically fully functional. The wear edges (cutting edges) have been renewed, making the blade ready for immediate use.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,826 h, laser power: 6,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, overall weight: 15,000 kg, total width: 6,659 mm, total height: 2,565 mm, product length (max.): 13,743 mm, number of axes: 3, This 3-axis Bystronic BySprint Fiber 4020 was manufactured in 2017. It features a cutting area of 4,064 mm by 2,032 mm and a maximum cutting thickness of 70 mm. The machine is equipped with a powerful 6,000 W fiber laser, capable of handling various materials. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 machine we have for sale. Contact us for further details. • Working area: • Cutting area: X 4,064 mm, Y 2,032 mm • Maximum cutting thickness (Z): 70 mm • Performance: • Max positioning speed (X/Y): 100 m/min • Max simultaneous speed: 140 m/min • Accuracy: Isdpfx Aoywwd Iskxsar • Positioning accuracy (VDI/DGQ 3441): ±0.1 mm • Repeatability (VDI/DGQ 3441): ±0.05 mm • Edge detection accuracy: ±0.5 mm • Capacity: • Maximum workpiece weight: 1,580 kg • Table system: • Table changeover time: 35 s • Laser specifications: • Type: Fiber • Pulse frequency: 1–2,500 Hz • Wavelength: Fiber standard • Maximum cutting thickness by material: • Steel: 20 mm • Stainless steel: 15 mm • Aluminum: 15 mm • Copper: 10 mm • Brass/Bronze: 10 mm • Power consumption: • Total system consumption (with filtration & chiller): 31.4 kW

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator Iedew Ivvcopfx Akxoar 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator - Final Demagnetizing Stage - Magnetic Drawer

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel Iasdpjw Ivk Tjfx Akxsr - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!