Used Laboratory Granulator Extruder for sale (2,506)

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Hedpfx Amjzmc R Ajyjr Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Hsdpfxezmc Rpe Amyor With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: ready for operation (used), functionality: fully functional, Nitrogen : 30 L/min 6.9 bar - 1.059 CFM 100 psi Min/ Max Operating Temperature : 5ºC - 25ºC / 41ºF - 77ºF Max Relative Humidity : 70% Maximum Altitude : 2000 Meters Pressure Dewpoint : -40ºC / -40ºF Particles : < 0.01 micron Suspended Liquids : None Phthalates : None Noise Level : 57 dB(A) Electrical Requirements : 230v 50/60Hz 8.4A Power Consumption 1932 watts Dimensions (cm/ ins) : 95 x 59 x 71 / 37 x 23 x 28 Hjdpfx Amsxlhcbsyer Weight (kg/ lbs) : 145 / 320

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, working height: 800 mm, input voltage: 400 V, overall weight: 800 kg, type of input current: three-phase, Manual Lisec butyl application machine LBH-25V, year 1989, fully functional, capacity of butyl storage cylinder 2 x 7,5 kg cartridge butyl application of spacer width 6-24 mm Hjdpfx Amezn Np Ijysr availabe from our stock in Hofkirchen/Austria

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hedoxnpx Nopfx Amysr

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Hedpfxjznz Ezj Amyjr Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Technical Specifications Manufacturer: Stahl Hedsznv Eijpfx Amysr Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical specifications according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application Areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Chamber dimensions (internal): W 1000 H 1000 D 800

Condition: used, Manufacturer: David + Baader, Kandel Type: 10880.3 Machine type: Industrial oven / Chamber oven / Heat treatment oven For sale is a used industrial oven from the manufacturer David + Baader Kandel, type 10880.3. This oven is suitable for a wide range of applications in industry, crafts, laboratories, and workshops and is ideal for heat treatment, drying, or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Design: Electric chamber oven Condition: Used Further technical data available upon request or according to the nameplate Features and advantages Robust industrial design Hedpfx Amoznv Dfsysr Uniform heat distribution Reliable temperature control Stable oven chamber Suitable for continuous operation Proven German quality Possible applications Heat treatment of metal parts Annealing and tempering processes Drying processes Laboratory and testing applications Research and development Workshop and production operations Chamber dimensions (internal): W700 H700 D700

Condition: used, Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine type: Electric chamber furnace / laboratory furnace / heat treatment furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideally suited for heat treatment processes, annealing, material testing, laboratory applications, as well as research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratories, workshops, industry, and research Solid German quality manufacturing Maximum temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Application areas: Heat treatment of metals Annealing and hardening Hsdpfxjznvzde Amyor Material tests Ceramic and laboratory applications Research and development Chamber dimensions (internal): Width: 260 Height: 180 Depth: 500

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Hjdpfjznkx Dsx Amyjr Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Hjdpfozc I Igox Amysr Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Hodpfxozmyufs Amyer Manufacturer: Forrec Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel Hsdjhx Elfjpfx Amysr The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Year of construction: 1998, operating hours: 1,776 h, condition: used, functionality: fully functional, machine/vehicle number: 37, IDE--o/c 182836 - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones Hjdpjzmurrefx Amyor - die connection IDE M70x2

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 135 t, It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty speed 2-10mm second pressing speed 2 mm second table size 1100x650x120mm 800 mm maximum open height table height max. 900 mm travel of the cylinder is 400 mm total height 2900 mm weight 2,3 T 200 L tank Hodpfx Amjigg E Hjyor Pump with 60 L capacity 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control system PILZ Communication operator/press Color touch screen 10" OMRON/SIEMENS

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) Hsdezk I Tkopfx Amysr 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Single-screw extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. If you have any further questions, please do not hesitate to contact us. Hodehgq Ahspfx Amyor Commissioning and testing can be arranged. Available for immediate delivery.

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Hodpfxoqu R Nas Amysr This machine is connected and ready for testing in our machine hall.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: Hsdpfsx Dkmgjx Amyjr • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. Hsdpfx Amsy A H Umjyjr The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system Hsdorg Ebcjpfx Amyjr

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. Hsdpfx Aew Iu T Tjmyjr • Screw diameter: 200 mm • with degassing zone • Drive power: 72.5 kW

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation Hjdpfxeycuuye Amyer • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm Hsdpfeqy E Evjx Amyer - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Hjdpfxjzktrro Amyjr Year: 1989 110 kW motor