Used Kuper Duplex 2100/650 + Kuper St/I-1400 for sale (63,866)

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Kdsdpfxoy Anp Ee Ah Est Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: used, Year of construction: 2003, functionality: unexamined, Serial No.: 14-26298 Kdsdpfxszvyqfe Ah Eot Recorded operating hours: 59,762 h Robot teach pendant

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Kedjzghf Ejpfx Ah Eedt

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Kdjdpfxezz A Iwj Ah Ejt Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: ready for operation (used), Working width 300 mm Mechanical oscillation Kdjdpfx Ahjyux Sys Eet Shoe Weight approx. 450 kg Star-delta motor start 380 V

Condition: used, functionality: fully functional, machine/vehicle number: H2X392V01052, Year of construction: 2019, operating hours: 650 h, load capacity: 2,500 kg, lifting height: 3,270 mm, free lift: 1,730 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2X392V01052 Kedpfx Aewct E Eeh Ejdt Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Very good Description: Linde H25D-02 No.: R0563 Year of Manufacture: 2019 Operating Hours: 650 The unit is visually and technically in very good condition. Fast and uncomplicated transport is possible upon request! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided upon request! Errors and prior sale excepted, sold to businesses only. All sales of used goods are subject to exclusion of warranty and/or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other units on site.

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- Kdsdpswgwmhsfx Ah Eot LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, Year of construction: 2004, functionality: fully functional, HEIDELBERG ST100.2 STITCHING MACHINE Kodpfozr Halex Ah Eodt Year 2004, second-hand, in excellent condition, cleaned and checked composed by 6 sheet feeders + cover feeder stitching station with 2 heads trilateral (trimmer) controls for signature pick-up and spine length OPTIONAL: double centre-cut

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Kdsdpfx Aex Nr R Hsh Ejt • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Kedpfezkmqbjx Ah Eedt Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Kjdpfszidi Sox Ah Eedt

Condition: excellent (used), Year of construction: 2015, General information Field of application: Construction Weights Empty weight: 1.500 kg Functional Dimensions of cargo space: 200 x 70 x 80 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 19 - 32 t Remanufactured: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 170 l/min Strike count: 320-640 Latest inspection: 2026-04-27 Production country: DE Additional information Please contact Ö. Inalkac for more information Kodpsy N Sdtjfx Ah Ejdt We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1700DP from 2015. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals, ContiLube and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 10,226 h, load capacity: 1,800 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,140 mm, power: 33 kW (44.87 HP), drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Ksdjz Amzqspfx Ah Eedt Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Front forklift - Diesel forklift MANITOU MI18D - - - Series S1E3 - - 1.8 ton lifting capacity - - FORK ADJUSTER + side shifter - - Duplex free-lift mast - - - Overall height 2.14m - - Lifting height 3.30m - - - Year of manufacture 2013 - - - 10226 operating hours according to display - - - 4-cylinder YANMAR diesel engine 45 hp - - Solid rubber tires approx. 90% - - 3rd + 4th control circuit to fork carriage - - - LED lighting system - - - new starter battery - - - mechanical hydraulic levers - - very maneuverable forklift - - good tires - - GOOD condition Side shifter, fork positioner, 3rd valve, 4th valve, roof cover

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 15,989 h, load capacity: 8,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,710 mm, power: 74 kW (100.61 HP), empty load weight: 12,500 kg, drive type: Diesel, Diesel forklift Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: LINDE H80D diesel forklift. Lifting capacity - - - Year of manufacture 2001 - - - 15,989 operating hours according to display - - - FORK ADJUSTER - - - Side shifter - - - Duplex free-lift mast - - - Overall height 2.71m - - - Lifting height 3.15m - - - 6-cylinder DEUTZ diesel engine TURBO, approx. 100 hp - - - Twin tires - - - Full cabin - - - Double pedal design - - - Fork length 1.80m - - - Fork carriage width 2.30m - - - all mechanical - - very good tires Side shifter, fork adjuster, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin. Kdodpfszuh Nyex Ah Eot

Year of construction: 2006, operating hours: 20,000,000 h, condition: like new (used), machine/vehicle number: 031012, 2 x VAC 60 collator, 1 x ACF 30 folder, 1 x SPF 30 Saddle Stitcher, 1 x HTS 30 Three knife trimmer Kdjdpfx Ahog E H Hvj Est Machine nr: 031012, Books produced: 20 million

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Kdjdpfxsu E E D Dj Ah Est Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm Kjdoyw Aa Uopfx Ah Eedt 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Kdjdpfxoy Sv Syj Ah Eet

Condition: used, Year of construction: 2003, functionality: unexamined, IRB 1400 M2000 industrial robot DEFECTIVE, SUITABLE FOR USE AS A SOURCE OF SPARE PARTS Kedpezvymtofx Ah Eodt Serial No.: 14-26293, Robot version: IRB 1400 including ABB robot controller Model S4C IRB1400 M2000 Recorded operating hours: 58,159 hours Robot teach pendant Cable set MSA: Robot cable is porous - functional.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Ksdpfx Ahezxzago Ejdt Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 6,937 h, load capacity: 3,500 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,290 mm, power: 42 kW (57.10 HP), drive type: Diesel, Diesel forklift Mast type: Duplex Kodpfx Ahsz Amzwe Eedt Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: Front forklift - Diesel forklift MANITOU MI35D - - - Series S1E3 - - 3.5 tons lifting capacity - - FORK ADJUSTER + side shifter - - Duplex free-lift mast - - - Overall height 2.29m - - Lifting height 3.30m - - - Year of manufacture 2013 - - - 6937 operating hours according to display - - - 4-cylinder YANMAR diesel engine 57 HP - - Solid rubber tires approx. 50% - - - 3rd + 4th control circuit to fork carriage - - - Fork length 2m (can be replaced) - - - LED lighting system - - - mechanical hydraulic levers - very maneuverable forklift - very good visibility for driving - - Additional control unit to fork carriage for e.g. bucket or rotator - - GOOD condition - - Delivery possible Side shifter, fork adjuster, 3rd valve, 4th valve, rear work light, front work light, roof cover.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapping Machine KC 8060/650 Universal Year of manufacture: 2002 Dimensions: approx. 3550 x 1350 x 1450 mm (L x W x H) Kedpfez A Dghox Ah Eedt Weight: approx. net 690 kg / gross 790 kg Technical data: Welding frame dimensions: 800 x 600 mm Film roll width: max. 750 mm Working height: 870 - 970 mm Passage height: 100 - 400 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrink tunnel. Particularly robust design for industrial use. Welding frame dimensions 800 x 600 mm. Proven impulse welding technology with a Teflon-coated separating welding wire for absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure precise adherence to the set welding time and for trouble-free separating welding, even with thick films. Inspection and demonstrations are possible by arrangement at our premises. Functional guarantee, no warranty.

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Kjdpfx Asy Snw Ijh Eodt Feel free to call if you have any questions.

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Optional service aisles Rollers Motor Kodpfxeu N Ndvs Ah Ejdt

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Kdedpfx Ahezuyhnj Eet Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.