Used Kuhlmeyer Efs-550 for sale (3,029)

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Dedpfx Aiey Tivuslocn

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Djdjzg Nbhspfx Ailjcn Documentation available Sold with protective cover.

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Dcodozimqxjpfx Ailen

Condition: refurbished (used), Year of construction: 2023, COLD FORMING CARLO SALVI 550/SV Completely Refurbished by HBR srl Possibility of having the version RF (with semitubular group). Machine with quick change system on K.O. cams. Range production: min. and max. wire diam.: 2 - 4,76 mm. max. cutoff length: 65 mm. max shank length: 50 mm. max production per min: 500 Motor Power: HP 7,5 Dedpfjqhndmsx Ailjcn

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm Dcjdpezy R Rkefx Ailjn 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Dedpfx Aijzquprolscn Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Distance between centers: 1000 mm Dodpeyapkwjfx Ailjcn Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Max. swing in gap: 710 mm Spindle bore: 52 mm Morse taper: No. 5 Max. cross slide travel: 350 mm Power: 11 hp

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 2,666 h, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,120 mm, fork carriage width: 1,250 mm, fork length: 2,100 mm, empty load weight: 7,575 kg, total length: 2,850 mm, drive type: Elektro, construction width: 1,450 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 28x12.5-15 Dcsdpfx Aisz Ifrijlen Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire size: 2 x 21x8-9 Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2020 Additional single hydraulic circuit, integrated side shifter, front and roof windshield, battery charger, 2x work lights at the front.

Condition: used, Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, OPS Ingersoll OPS 550 – HSC Milling Machine (Year of Manufacture 2007) with Tool Changer & Extraction System Manufacturer: OPS Ingersoll Funkenerosion GmbH Model: OPS 550 Year of Manufacture: 2007 Machine No.: 655029 Made in Germany The OPS Ingersoll OPS 550 is a precise and powerful high-speed milling machine (HSC) designed to meet the highest demands in toolmaking, mold making, and precision component manufacturing. Featuring an integrated tool changer, a high-performance extraction system, and a user-friendly control unit, it provides optimal conditions for efficient and highly precise work. Equipment & Features Integrated tool changer with multiple tool positions Extraction system for clean operation OPS control unit with screen, keyboard, and emergency stop Dsdpfx Aiow I Sm Djlecn Precise HSC machining for fine contours and complex shapes Robust machine construction for lasting precision Technical Specifications Power supply: 400 V, 3-phase, 50 Hz Control voltage: 24 V DC Rated current: 63 A Power consumption: 55 A Year of manufacture: 2007 Errors, typographical mistakes and prior sale excepted.

Condition: used, Year of construction: 2014, operating hours: 7,700 h, Equipment: all wheel drive, JCB 550-80 WM Year of manufacture: 2014 7,700 hours 4x4 ALL-WHEEL DRIVE Lifting capacity: 5 tons Lifting height: 8 m Engine: 93 kW / 127 hp Weight: 11,250 kg German machine Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will gladly take care of your financing or leasing options. EU sales: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation options Djdpfxjytl Ils Ailscn - Transfer from Munich Airport or Passau train station

Condition: good (used), functionality: fully functional, The Z-conveyor belt from MFP, featuring timed operation, is for sale. Specifications: Width: 1400 mm, with hopper, 150 mm, along the entire length Inclined belt: 1400 mm Discharge belt: 550 mm Belt speed: 3 m/min With timed operation Mobile New belt with 30 mm high cleats, spaced 330 mm apart. Dsdpfezu Iv Tjx Ailecn

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: Dodpfxsv Say As Ailjcn - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Dcodpfx Aiexq A Hlslen Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, Year of construction: 1995, functionality: fully functional, JOSTING EFS 2300 L is a heavy-duty single-knife veneer guillotine designed for accurate cutting of veneer sheets and veneer packs. The machine has been modernized and upgraded with an electronic positioning and control system, improving cutting accuracy, repeatability and ease of operation. Manufacturer: JOSTING Model: EFS 2300 L Machine type: Veneer Jointing Guillotine / Veneer Pack Cutting Machine Cutting length: 2,300 mm Maximum insertion height: 80 mm Parallel fence range: approx. 20–720 mm* Pressure bar: Hydraulic cylinder with two pressure stages Cutter bar drive: Brake motor, gearbox and crank drive Parallel fence: Motor-driven positioning system Connected load: approx. 7.7 kW Machine footprint with parallel fence: approx. 3,640 × 1,700 mm Dedpfx Aezu Au Dsilocn Machine height: approx. 1,700 mm Net weight: approx. 3,000 kg Modernization INCLUDES: Digital LCD display Electronic measurement display in millimetres Numeric keypad for direct entry of required cutting dimensions Automatic positioning of the parallel back fence Programmable cutting dimensions Cutting sequence / step programming functions Electronic adjustment and positioning controls Start/Stop control directly from the operator panel Manual fine-adjustment controls Centralized operator interface combining machine and positioning functions

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details. • Tool magazine capacity: 24 positions Dedpjzrw Nkefx Ailocn

Condition: used, Heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry/Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds 2500/3000/4200 rpm Miter stop with length compensation Saw blade up to 550 mm diameter Electrically adjustable lifting and tilting of the saw blade with digital display Machine from retirement sale / first delivery in 2011 Machine has been WORKSHOP-TESTED and is in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch Dedpfxsz D Szcj Ailjcn

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Dedpfxjmzbkro Ailocn Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Specifications: Capacity: 550 L Dsdpfx Aisykn T Sslocn Construction Material: Stainless Steel Horsepower: 5 hp Dimensions: 44.8819 x 32.0866 x 39.9606

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Dcodpfxsy S Rp Te Ailon Coolant system, 70 bar, Chip conveyor.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 20,121 h, load capacity: 1,300 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,076 kg, total length: 1,800 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 35 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Dsdpfxjz Idzio Ailscn Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Northbatt Battery type: PzS Battery year of manufacture: 2025 Battery condition: New 4. Valve, work light at the front

Condition: used, Year of construction: 2007, Fabricant : WAM Model : WBHY 550 PO Dcjdpoziqfmjfx Ailen Year : 2007 Type : Ploughshare mixer Total tank capacity: 550 L Useful tank capacity: 518 L Material : stainless steel Number of ploughshares: 4 + 2 blades Spray nozzle: liquid injection Choppers : 2 (ATEX motors: 4 kW) Main motor power: 18.5 kW Machine dimensions: 130 x 230 x 145 cm Weight : 2000 kg Plan to install an electrical box: this request may be subject to a separate quotation

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Item for sale: Dedpfx Aez I Tguoilocn 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical specifications: Dcodpfx Aoggbmaeilsn - Edge grinding machine for edge finishing on - welded boxes, cabinets, safes, etc. - SIEMENS control for indexing and oscillation - max. grinding height approx. 1200 mm - grinding belt dimensions 100 x 2240 mm - grinding belt speed 12 + 24 m/s - grinding unit can be swiveled - 2 magnetic clamping plates - motorized grinding dust extraction - pneumatic connection 6 bar - power supply 400 V - space requirement approx. W 2500 x H 2000 x D 2000 mm - weight approx. 1500 kg

Condition: used, Year of construction: 2021, Hilltip IceStriker 550 Spreader, Year of Manufacture 2021 | Returned from Rental | Very Good Condition | Immediately Available Compact professional spreader for municipalities, municipal depots, and service providers. For sale is a Hilltip IceStriker 550 from the year 2021. This spreader comes from our rental fleet and has been regularly maintained. The unit is in very good, well-maintained condition, is technically flawless, and ready for immediate use. The IceStriker 550 is the ideal solution for pick-up trucks, municipal vehicles, and smaller winter service vehicles. Thanks to its compact design, wet salt technology, and extensive special equipment, it enables economical and precise winter service operations. Technical Data Manufacturer: Hilltip Model: IceStriker 550 Dcedpfx Aezzhbvsilen Year of Manufacture: 2021 Condition: Used, Returned from Rental Hopper Volume: 550 liters Drive: Electric Hopper Material: Corrosion-resistant polyethylene Spreading Material: Salt, wet salt, grit, and sand-salt mixtures Dimensions Length: approx. 1,420 mm Width: approx. 1,220 mm Height: approx. 1,060 mm Special Equipment: * LED rear lighting including license plate kit * Warning light for increased safety during operation * White LED work light * Large hopper (+25 cm) for optimized material distribution * Sensor with alarm function when material is low * Salt pre-wetting unit * Manual spray nozzle Your Advantages: * Well-maintained, returned from rental * Regularly maintained * Technically flawless condition * Compact design for versatile carrier vehicles * Wet salt technology for economical spreading material usage * Very good availability of spare parts * Ready for immediate use The Hilltip IceStriker 550 offers professional winter service technology in a compact design. Thanks to the integrated wet salt technology, material level monitoring, and extensive special equipment, this spreader is ideally equipped for municipal and commercial winter service operations. Inspection and demonstration possible by appointment. Financing and nationwide delivery available upon request. Location: 10114

Condition: used, Year of construction: 1955, groove width 90 mm drawing length 550 mm table surface area 400x300 mm a lot of tools Dcsdpfxoy D A Dyj Ailjn