Used Kovosvit Mas Vo 50 for sale (37,928)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") Nwodpfx Aji Rizfjmyoi 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: new, Technical data for the grating: Manufacturer: Gi-Ro Vreden Condition of the product: new (unused) Nwodpfxok Ebq Te Amyoi Reason for return: incorrect order by end customer Included in the scope of delivery: 1x pressed grating, new (unused) Material color: hot-dip galvanized Overall depth: 1,000 mm (direction of load-bearing bar) Overall width: 980 mm (direction of cross bar) Load-bearing bar dimensions: 35/1.7 mm S355JR Slip resistance of load-bearing bars: no Slip resistance of cross bars: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | per piece Internal designation: R

Condition: used, mileage: 80,000 km, power: 132 kW (179.47 HP), first registration: 04/2002, overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 4,730 kg, empty load weight: 7,260 kg, tire size: 10R17,5, wheelbase: 3,260 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, low noise, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, ABS (anti-lock braking system), constant throttle, raised exhaust, leaf-air suspension, trailer coupling ball head, low-noise G1, environmental badge green Wheelbase: 3260 mm Body: Bucher-Schörling CF 50, right-hand drive sweeper M-Benz engine 6,341 operating hours ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwsdpfxevhliuo Amyoi - .

Condition: used, mileage: 1,001 km, gearing type: automatic, fuel type: diesel, color: red, empty load weight: 14,500 kg, axle configuration: 4x2, first registration: 01/1981, Year of construction: 1981, driver cabin: other, Vehicle location: Bovenden, automatic Nwodpfx Aop N Dayomyji Body: Load capacity approx. 4,000 kg 6 cylinder Deutz diesel, lifting height 2,750 mm, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,600 km, first registration: 07/2010, fuel type: gas, empty load weight: 3,175 kg, maximum load weight: 1,825 kg, overall weight: 5,000 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, front tire size: 6.50 -10, rear tire size: 225/75 R 16,5, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, short wheelbase, rear window, automatic transmission, leaf spring suspension. Body: Tractor unit, 1,600 operating hours. Tractor unit with Vortec GM gas engine, kilometers = operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nsdpoi Rpm Nefx Amyowi

Condition: used, mileage: 3,439 km, first registration: 07/2010, fuel type: gas, empty load weight: 3,175 kg, maximum load weight: 1,825 kg, overall weight: 5,000 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, front tire size: 6.50 -10, rear tire size: 225/75 R 16,5, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, short wheelbase, rear window, automatic transmission, leaf spring suspension Type of vehicle: Tractor unit, 3,439 operating hours, equipped with a Vortec GM gas engine, mileage = operating hours. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nodpfx Amji Rpqajyswi

Condition: used, operating hours: 5,485 h, mileage: 98,662 km, power: 118 kW (160.44 HP), first registration: 03/2014, overall weight: 11,400 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, wheelbase: 1,800 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, soot filter, * German vehicle * 1st owner * In 2024, €18,000 was invested in the technology (invoice available) * Only 5,965 operating hours * Original 98,662 km * Condition as shown in photos * 3-disc brush system * Adjustable/movable brush system * Working width up to 3.40 m * Disc brush diameter: 750 - 900 mm * Pre-spray system * Suction hose diameter: 225 mm * 5 m³ stainless steel debris container * 600 l water tank * Discharge height: 850 mm * Joystick control * Air conditioning Nwodpjy Himyefx Amyei * EasyDrive (hydrostatic drive) (SN) * Maximum speed 50 km/h * Reversing camera * Air-suspended comfort seat * LED work lights * Iveco 4-cylinder diesel engine * 118 kW / 160 hp * 3,920 cc displacement * Beacon lights * Stereo CD * 120-liter diesel tank * GVW 11,400 kg * Curb weight: 5,900 kg * Payload: 5,500 kg If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer generally is WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You will find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We strongly offer and recommend an inspection and thorough check of the goods to prevent any possible misconceptions regarding their condition and suitability. Inspection and checks are possible at any time by prior arrangement and are expressly encouraged. All information provided is without guarantee. No liability is accepted for mistakes or inaccurate details in this listing. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 Nwjdpfx Aowlvi Ejmyji spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: used, Year of construction: 2023, operating hours: 1,300 h, Yanmar VIO 50/6B Year of manufacture: 2023 1300 hours !!!!! POWERTILT !!!!! Full hydraulic quick coupler on the Powertilt 3 buckets German machine, first owner Complete hydraulic lines/connections for hammer/grapple/shear Tracks/undercarriage approx. 60-70% remaining High-flow hydraulics Operating weight approx. 4900 kg Ready for immediate use Delivery possible Financing possible Please visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/????/?????..... Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2000 Our services for you: - Customs license plates Nedjy U Tb Rjpfx Amyewi - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 14,725 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,870 mm, fork carriage width: 1,500 mm, fork length: 1,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 600 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Dual pedal Speed class: 20 Condition: Refurbished, without warranty Technical condition: Good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80–100% Rear tire type: Pneumatic Njdpfxsy Uz S Ds Amyswi Rear tire size: 250-15 Rear tire condition: 80–100% Description: Handover with new FEM 4.004 inspection including inspection booklet / NEW maintenance. If you have further questions, feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist with leasing & financing, as well as delivery at favorable terms upon request. We also accept Linde equipment as a trade-in, even if you do not purchase a machine from us. Indicated operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Fork positioner, Kaup integrated fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, road approval (STVZO), full cab, air conditioning, safety light, single pedal, seat heating, LED, Comfort seat with PVC air suspension and seat heating.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Njdpsu Hkb Refx Amyjwi Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, functionality: fully functional, machine/vehicle number: H2X394Y034.., Year of construction: 2021, operating hours: 8,159 h, load capacity: 5,000 kg, lifting height: 6,765 mm, free lift: 2,260 mm, fuel type: diesel, mast type: triplex, construction height: 3,176 mm, fork length: 1,200 mm, empty load weight: 7,319 kg, drive type: Diesel, Diesel forklift Chassis number: H2X394Y034.. Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: good Nodjy R E Rvjpfx Amyjwi Front tire type: Solid rubber Front tire condition: 20 - 40% Rear tire type: Solid rubber Rear tire condition: New Side shifter, fork positioner, 3rd valve, 4th valve, Front and rear camera, Blue Spot, air-suspended comfort seat, pressure accumulator, strobe light, heating with air conditioning, integrated particulate filter.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,734 h, load capacity: 5,000 kg, lifting height: 5,565 mm, free lift: 1,860 mm, fuel type: diesel, mast type: triplex, construction height: 2,876 mm, fork carriage width: 1,350 mm, fork length: 1,600 mm, drive type: Diesel, construction width: 1,350 mm, Diesel Forklift Load Centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Hydrostatic / 2-pedal Speed Class: 20 Condition: Refurbished, no warranty Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 NEW Front Tyres Condition: 80 - 100% Rear Tyres Type: Superelastic Rear Tyres Size: 250-15 NEW Rear Tyres Condition: 80 - 100% Nodpfx Amjy I Ehvjyewi Description: Handover with new FEM 4.004 inspection including inspection booklet. Should you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage at fleischmann-foerdertechnik. Leasing & financing as well as delivery at favourable conditions can be arranged upon request. We will also consider trade-ins of Linde equipment – even if you do not purchase a unit from us. Listed operating hours were read off at the time of listing. Subject to prior sale, changes, and errors. Sideshift fork, side shifter, fork positioner, Durwen fork positioner with separate side shifter 3rd valve, 4th valve, rear working light, front working light, heater, soot filter, full cabin, safety light, seat heating, Comfort air-cushioned seat with seat heating, foldable left door

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm Nwsdpfx Aeyvkuqjmyji travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg Nodpfstyit Eex Amyjwi On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Nwodpfx Amowxd Agsysi Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, total height: 2,380 mm, total length: 1,450 mm, total width: 17,600 mm, overall weight: 3,500 kg, table length: 800 mm, table width: 480 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 20 rpm, A DMU brand and type 50 V milling center is for sale A new spindle was recently installed. The machine is in very good condition and fully operational, machining in the 100el range is possible without any problems Technical data: Brand GRUNDIG Model MillPlus Spindle speed range: 20 - 8000 Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Outer length of table: 800 mm Outer width of table: 480 mm Spindle holder: SK40 Dimensions L*W*H: 2450*1760+2380 mm Weight: 3500 kg On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Nedpfsrdf Ebsx Amyowi Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2Y394L01382, Year of construction: 2022, operating hours: 4,782 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,900 mm Free lift: 150 mm MACHINE DETAILS Mast type: Standard Drive type: LPG Battery: 12 V starter battery Operating hours: 4,782 h Nedpfx Ameytn I Ioyewi EQUIPMENT Former Linde full-service unit Safety inspection (UVV) until 02/2027 Next service due in 518 operating hours Note: Mast removal costs €750 net. All dimensions are approximate. No liability is assumed for any writing or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 t possible on site with large forklift at your own risk. Collection ONLY with email confirmation of payment! Collection WITHOUT prior appointment from Monday to Friday, 7:00 am to 4:30 pm. If the mast is too high for transport, it can be dismantled on request. If the machine is not collected within the agreed deadline, a storage fee of €20 per machine per day applies (additional charges must be paid before collection).

Condition: new, Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3 Nwsdpfx Amsd Ab H Soyji         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, Oil tank capacity: 60Bending capacity: (Flaches Material) 300x15Bending capacity: (Runde Rohre) 76x4,0pressure: 50working speed: 10Return speed: 10motor: 5.5table area: 600 x 1250working height: 930length: 1400width: 600heigth: 1500stroke: 285weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials Nsdpsr I H A Uefx Amyewi like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Nwjdpfx Amsd Etfyjyoi

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg - Number of trays: 22 pcs Nedpfjd Atghjx Amyswi - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance.

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Nwodpfx Amjx Srp Ueyji

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 225 mm, JUNG HF50 mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines 12 month warranty in stock max. grinding range: 600 x 250 mm Nwjdpfx Amjbwl Ubeyji

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,115 h, load capacity: 5,000 kg, lifting height: 4,675 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork carriage width: 1,350 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Double pedal Technical condition: Good Front tyres type: Superelastic Front tyres size: 345/45-15 Njdpsyl A N Dsfx Amyowi Front tyres condition: 40 - 60% Rear tyres type: Superelastic Rear tyres size: 23x9-10 Rear tyres condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery brand: Hoppecke Battery type: PzS Battery year: 2021 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection book. If you have further questions, please feel free to contact us. In addition to this model, we have approx. 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. Leasing & financing, as well as delivery on favourable terms, can be arranged upon request. We are also happy to consider trade-in of Linde units – even if you do not purchase a truck from us. Specified operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light,