Used Kinshofer Gripper for sale (898)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 578 034 05, Bobst Autoplatine SP 104 ER Year: 2001 Serial Number: 0578 034 05 / 0531 021 05 Automatic die cutter for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop and pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centerings at stripping and delivery stations Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard and corrugated board up to 4 mm 4 laterally guided transport belts Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm Upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centerings, ±0.9 mm Lowering of the chain guides Nledpfj Afwrvjx Ag Ish Waste Stripping Station System with 3 pull-out frames 2x upper pull-out frame 2x lower pull-out frame Central quick locking pull-out frame Blank Stack Delivery Station Automatic binder sheet inserter Gripper opening device for full sheet stacks Automatic non-stop device Special non-stop rack for small boxes below 140 mm Pile raising security Waste / skeleton removal apron Braking brush of the waste skeleton Front trim ejection control by photocells 2x upper pull-out frame Lower pull-out frame Pallet changing device with conveyor Technical Details Parameter Value Production Rate 8,000 sheets/hour Max Sheet Size 1,040 x 740 mm Min Sheet Size 400 x 350 mm Max Die-Cutting Size (with gripper margin) 1,040 x 725 mm Max Cutting Die Size 1,050 x 746 mm Convertible Stock Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Parameter Value Max Platen Pressure 2.5 MN (250 t) Max Pile Height Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size 1,200 x 800 mm Compressed Air min. 6 bar; without central supply, a compressor of 80 m³/h with 500 l tank is required Net Weight 20,000 kg Electricity Main motor 11 kW, total connected load max. 25 kVA still connected to power

Condition: new, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Kinshofer Pallet Clamp / Stone Stacking Clamp / KM 332 V – 1100 / NEW Price: €8,790.00 net / €10,460.10 gross Immersion depth (mm): 1,100 – 1,650 Load capacity at min./max. immersion depth (kg): 1,900 / 1,350 Opening width A min./max. (mm): 400 – 1,400 Height (without motor) (mm): 1,315 – 1,865 Weight (without press rails) (kg): 340 Operating pressure at flow rate: 20 – 26 MPa (200 – 260 bar) at max. 75 l/min, and 20 – 37 MPa (200 – 370 bar) at max. 40 l/min The advanced KM 332 stone stacking clamp is highly versatile for handling both palletised and non-palletised construction materials. - Fixed or adjustable immersion depth with parallel-opening and closing gripping arms – hydraulically driven. - Versatile application with opening widths from 400 mm up to 1,400 mm, e.g. for loading individual concrete elements such as kerbstones up to complete brick packs. - Adjustable immersion depths – ideal for loads with varying heights. Njdpfx Agoykhqkj Iolh - Synchronisation of the gripping arms via two hydraulic cylinders connected by a differential circuit. - Safety ensured by an overpressure valve in the hydraulic system, protecting against overload. A check valve prevents accidental release of clamped loads, even in the event of pressure loss in the carrier unit. - Durability ensured by generously dimensioned bearings, integrated lubricant reservoir, automatic wear compensation of the main bearing, and spherical central mounting of the cylinders. We stock a large selection of various attachments available for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Financing options available upon request. We are official distribution and service partners for: - Westtech - Magni Telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Application: Freight transport Please contact Marius Herden for further information.

Condition: used, mileage: 1,001 km, first registration: 01/1993, color: black, driver cabin: other, gearing type: other, Year of construction: 1993, Vehicle location: Bovenden. Superstructure: Grabber, payload 300 kg, grabber width 740mm, depth 600mm. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Nlodji Rphnopfx Ag Ioh

Condition: good (used), Year of construction: 2018, The TREIF FALCON evolution is an advanced, high-speed industrial slicer and portion cutter for red meat, pork, poultry, and cheese – both bone-in and boneless. Introduced in 2018, the machine scans each piece with cameras, weighs it using an integrated scale, and automatically selects the cutting point to produce portions of a specified weight or thickness. This enables the production of consistent portions at high throughput and replaces manual portioning and weight control in processing plants. How does the TREIF FALCON evolution work? The product is placed on a conveyor and fed to a gripper, which guides it through the machine, while an upper clamp stabilizes the piece during cutting. Cameras scan the product from four sides, and an integrated scale measures its weight, allowing the software to combine anatomical and volumetric portioning. The blade is guided along the product’s contour and cuts slices or portions whose weight or thickness are automatically calibrated to the preset value. The portions are placed on the discharge conveyor and can be transferred to subsequent machines in the line, such as packaging, tray-loading, or freezing machines. The machine can be equipped with a pre-conveyor, a checkweigher, and sorting stations, which increase the accuracy and automation of the process. Key Benefits of the TREIF FALCON evolution The combination of high cutting speed, the 4D system, and stable product guidance delivers high throughput with repeatable precision, which limits portion giveaway and improves yield. The machine can divide product into portions in different weight categories at the press of a button, and optional software, including a Performance Pack that increases output and yield optimisation modules, lets the machine be matched to the plant’s requirements. The Premium-Hygiene-Design construction is open, and the opening mechanism and reduced accessory weight allow quick, easy cleaning and lower maintenance effort. An optional downstream check weigher (up to 300 weighing cycles per minute) with feedback control continuously regulates giveaway, while optional sorting, a robot for sorting and placement, a portioning separator, and a grouping unit reduce the need for manual work. Technical Specifications for the TREIF FALCON evolution Manufacturer: TREIF Model: FALCON evolution Type: Advanced, high-speed industrial slicer and portion cutter Year of manufacture: 2018 Power supply: 3-phase, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Nlsdpfxj Afxaze Ag Ijh Rated current: 22–18 A Power cord fuse rating: 32 A Rated power: 11.3 kW Weight: 2,100 kg Technology: four-sided camera scanning, integrated scale, gripper, and pressure plate guiding the blade along the product’s contour Portioning modes: by weight or thickness, automatic cut calibration Maximum cutting speed: approx. 500 cuts/min Maximum product cross-section (W x H): approx. 260 x 180 mm Maximum length of the product being fed: approx. 800 mm Products: red meat, pork, poultry, and cheese, bone-in and boneless Included: double checkweigher, sorting station, outfeed conveyor, tool trolley, complete documentation

Condition: used, mileage: 1,001 km, first registration: 01/2001, color: red, driver cabin: other, gearing type: other, Year of construction: 2001, Vehicle location: Bovenden. Body: Grabber, 50 cm external width, 250 liters. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors! Nledpfxei Rnpte Ag Ijh

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) Nsdpfxj Afx Rye Ag Ielh 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: excellent (used), For sale: professional EXpressO vacuum lifter, German-made. This device is designed for lifting and transporting flat items using vacuum technology. Model features increased lifting capacity up to 70 kg, equipped with PIAB components and four large suction cups ensuring stable and secure handling. Ideal for working with glass, sheet metal, panels, and other flat elements in industrial settings and warehouses. Technical specifications: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Nsdjz Slt Depfx Ag Ijlh Maximum lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: Device in very good technical condition Fully operational both visually and mechanically Normal signs of use Complete as shown in the photos Applications: glass and window transportation sheet metal and panel handling production lines warehouses and logistics Included in the set: complete vacuum lifter control handle air installation Shipping: Courier delivery available.

Condition: new, functionality: fully functional, color: black, empty load weight: 340 kg, Year of construction: 2025, Brand: Kinshofer Model: KM652-5-230 Year of manufacture: Unused, 2025 Serial number: LG14540 Dimensions LxWxH (mm): 900 x 900 x 980 Weight (kg) approx.: 340 Quantity in stock: 1 Nedpfx Agewwr Ibs Islh Capacity (kg): 2000 (230 ltrs) Suitable for: Crane Max. working pressure (bar): 260 Made in: Germany Comments: Unused, CE approved with document, oil flow 25-75 ltrs/min

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Nlsdj Afwubspfx Ag Ish Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1, type of input current: three-phase, Machine components: 1. End-jointing machine a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm b. Infeed roller conveyor with grippers c. “Meler” B4 VS glue melting unit d. Crosscut saw Ø 300 mm and 2004 2. Parquet gluing machine a. Buffer b. Glue roller c. Stacking mechanism d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm e. Traverse carriage 3. Glue presses Nlodpfxez Rkbce Ag Ieh Option 1: Crosscutting to pre-set lengths In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted. Option 2: Gluing to standard lengths without crosscutting Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw. Last modification to the machine: 2018 YouTube video: shorts/VhgYFOVvSfY?feature=share

Condition: used, mileage: 1,001 km, first registration: 01/1983, driver cabin: other, gearing type: other, Year of construction: 1983, Vehicle location: Bovenden. Body: Width 50 cm, Type 601-250, Gripper width 500mm, Depth 500mm. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Nodpfx Asi Rn Ireg Iolh

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications Nlsdpfjz Sltwjx Ag Ijh glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: used, Bosch Scara SR 800 robot with controller + cell, pivoting arm robot with gripper. Nljdoyfhn Sepfx Ag Ish You are purchasing a functional Bosch Scara SR 800 robot with controller and a complete cell. Upon request, we can also ship only the robot without the cell. Everything is in working order and has been regularly maintained. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2019 and has seen very little use since then. The system efficiently covers the entire process from stringer pre-fabrication, main nailing, IPPC branding to nesting/stacking. Technical Data & Highlights: • Changeover Times: Fully automatic adjustment of almost all components at the push of a button! • Main Line Performance: 400–600 four-way pallets / 8 hours with only 2 operators • Stringer Line Performance: High-performance cycle time of approx. 4 seconds per stringer • Control System: Siemens S7 PLC (Main Line) Nlsdpfs Afyn Hsx Ag Ioh System Components: Pos. 1a: Template Nailing Machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2019) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejector. • 1 set (20 pcs) of hammer boxes on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control system, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail loading platform, central lubrication. Pos. 1b: Fully Automatic Stringer Nailing Machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Autonomous operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with eject control, run-out buffer. • Support/spare parts guaranteed in the long term by successor AVM Metaalbewerking. Pos. 2: Intermediate transfer unit with integrated IPPC branding station (approx. 2,500 mm) • Pallet transport for intermediate processes, release manually or via automation. • Auto-adjustment at the push of a button: Width (700-1500 mm) & height motorized via spindle. • 2 longitudinally adjustable branding units (heating elements 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to the stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal Stacker (Fully Automatic with Nesting) • Stable double-column portal with lifting crossbeam (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Conveyor & Safety Devices • Heavy-duty removal conveyor (approx. 5,900 mm), driven at 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Disassembly, loading and collection are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: A0441D0171, TRUMPF TruLaser Tube 7000 (T03) – 3.6 kW – LoadMaster Tube 6.5 m – Full Equipment Manufacturer: TRUMPF Model: TruLaser Tube 7000 (T03) Machine Type: CNC Tube Laser Cutting Machine Year of Construction: 2016 Control System: Siemens Sinumerik 840D Laser Power: 3,600 Watts (TruFlow 3600) Laser Technology: CO₂ Laser Voltage: 400 V Frequency: 50 Hz X-axis tube travel: 6,500 mm Outer diameter: 204 mm Lens cutting head with 155 mm focal length Condition: Used, very good Availability: Upon request For sale is a TRUMPF TruLaser Tube 7000 (T03), a high-performance CNC tube laser cutting machine with a 3.6 kW CO₂ laser and extensive optional equipment. The machine features an automatic LoadMaster Tube 6.5 m loading system with bundle support and two grippers, as well as a flexible unloading station with a length of 4.5 m. Thanks to the SeamLine Tube, PierceLine, FocusLine, NitroLine, and ControlLine equipment, the system offers versatile options for the precise processing of tubes and profiles. Nledpo Afpucsfx Ag Ieh The integrated technology package for bevel cuts expands the processing capabilities. The scratch-resistant material feed, the movable conveyor tables, and the automatic scrap conveyor ensure an efficient material flow. All technical specifications are based on the available TRUMPF delivery documents from March 2016. Subject to change and errors. Sale due to business closure. Price upon request.

Condition: used, mileage: 1,001 km, first registration: 01/1992, driver cabin: other, gearing type: other, Year of construction: 1992, Vehicle location: Bovenden Nsdpfx Aoi Rn Amog Iolh Grabber width: 640mm, depth: 550mm. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Mitsubishi MELFA RV-20FM-D – 6-Axis Industrial Robot Year 2017 | ONLY 280 OPERATING HOURS | Fully Functional | Complete System with Vacuum Gripper We are offering a Mitsubishi MELFA RV-20FM-D 6-axis industrial robot, manufactured in 2017, in excellent condition with only 280 operating hours. The robot was originally purchased for a planned industrial automation project. However, the project was subsequently implemented using a different technology, and the robot was never put into continuous series production. As a result, the robot has been used very little and remains in very good technical condition. This is an excellent opportunity to purchase a high-quality Mitsubishi industrial robot with exceptionally low operating hours, complete with its controller, programming equipment, software, and vacuum gripper. Technical Information Manufacturer: Mitsubishi Electric Model: MELFA RV-20FM-D Year of manufacture: 2017 Operating hours: ONLY 280 hours Robot type: 6-axis articulated industrial robot Condition: Used – excellent, very low usage Functionality: Fully functional Application: Industrial automation, handling, and machine tending Scope of Delivery The complete system includes: Mitsubishi MELFA RV-20FM-D industrial robot Original Mitsubishi robot controller Teach pendant / programming unit Software and programming equipment Robot connection cables and accessories Vacuum gripper / vacuum end-of-arm tooling The robot is supplied as a complete package, ready for integration into a suitable industrial automation application. Typical Applications Pick and place operations CNC machine loading and unloading Automated material handling Machine tending Injection molding machine handling Production line automation Robotic handling and positioning General industrial automation Condition and Operating History Nljdpfx Aj Aarn Ijg Ijh ONLY 280 OPERATING HOURS SINCE 2017! The extremely low operating hours are one of the main advantages of this robot. The robot was acquired for an automation project but was never used in regular continuous production. It has therefore experienced significantly less operational use than a typical industrial robot of the same age. The robot is fully functional and in very good technical condition. The complete equipment, including the vacuum gripper, is included in the sale. Reason for Sale The original automation project was implemented using alternative technology. The robot is no longer required and is therefore offered for sale. Inspection and Location Location: Slavkov u Brna, Czech Republic (near Brno) Inspection and functional demonstration are possible by prior appointment. Additional photographs and technical information can be provided upon request. International buyers are welcome. Price EUR 12,900 Please feel free to contact us for further information or to arrange an inspection. Mitsubishi MELFA RV-20FM-D – 2017 – Only 280 operating hours – Complete system with vacuum gripper.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg 6 units available!!! Like-new condition with minor signs of use, see images. Njdpfszv E Ddsx Ag Ijlh Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides Nlsdpfx Agj Afv Sze Ijh ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: used, mileage: 1,001 km, first registration: 01/2003, driver cabin: other, gearing type: other, Year of construction: 2003, Vehicle location: Bovenden. Folding device for container emptying equipment using a hydraulic cylinder on the crane jib. In the unlocked state, it also functions as a hydraulic swing brake. Weight: 75 kg. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale and errors! Njdpoi Rngkjfx Ag Islh

Year of construction: 1998, condition: used, functionality: fully functional, Automatic die cutter for paper and carton converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The press is equipped with an automatic waste stripping station and a pile delivery with manual non-stop rack and front waste removal device. Operation is controlled via the Bobst C.U.B.E. control system with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping station. Equipment ###Machine Platform with safety barrier Machine elevated by 415 mm, including platform elevation Centerline system for off-press tool preparation, quick registration, and fast setting of adjustable elements Electrical cabinet with air conditioner Light beam indicator for machine state Sheet passage control unit with infrared cells 4 auxiliary control panels C.U.B.E. centralized microprocessor control unit with LCD display and keyboard for sheet counting, cutting force with adjustable overload limiter, speed setting, and synoptic status display Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at stripping station Three-phase asynchronous main motor with frequency converter control ###Feeder Floating pallet tray with manual handle for lateral adjustment during production Suction unit with multiple adjustments Pile height control with front photocell Side blowers laterally adjustable with Centerline marks Automatic vertical compensation of the suction head Manual non-stop device Sheet synchronization device adjustable during operation ###Feed Table Anti-static stainless steel plate Upper transport for paper, carton, and corrugated board up to 4 mm Upper frame with manual lifting device 4 fixed position lower feed belts 4 paired adjustable front lays Pull guide (OS) adjustable with Centerline marks Sheet presence control and double sheet detector Sheet synchronization device with manual adjustment, machine stopped ###Platen Press 3x upper chase with quick locking, fixed bottom plate Lower ground steel cutting plate, 5 mm Lower supporting plate of synthetic material, 22.5 mm Device for die-cutting without gripper margin Gripper bar reopening device Compensation plate, 4 mm ground steel Adjustable centerings for the lower supporting plate, ±0.9 mm ###Waste Stripping Station 2x upper pull-out frame 2x lower pull-out frame Central quick lock pull-out frame ###Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size: (with gripper margin) 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,400 mm (non-stop 1,100 mm), delivery 1,120 mm Max Pallet Size: 1,200 x 800 mm ###Compressed Air Nlodpj Afvrujfx Ag Ijh min. 6 bar; without a central supply, a compressor of 7.5 m³/h with a 110 l tank is required ###Net Weight 15,000 kg ###Electricity Main motor 11 kW, total connected load max. 25 kVA Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: good (used), Mechandling 579 Rotation reel gripper lifter Nsdpfx Aez It E Dog Ijlh 2009, Stainless, ultra powered rotation reel gripper, mobile, 12V

Condition: excellent (used), Year of construction: 2012, operating hours: 838 h, functionality: fully functional, overall weight: 268 kg, load capacity: 3 kg, arm reach: 1,434 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, repeat accuracy: 0.08 mm, Equipment: documentation/manual, Yaskawa MA1400 + HP20D robot system – only 838 servo operating hours. Two robots, coordinated operation, and flexible welding capabilities. For sale: a Yaskawa robot system in very good condition, tested and fully functional, for arc welding and material handling applications. The system includes a DX100 controller, a Fronius TransSteel 5000 welding power source, an automatic torch cleaner, and a well-equipped Siegmund welding table with a plasma-nitrided surface. Master-Slave control – Jigless welding. The two robots can operate synchronously: the 20 kg payload HP20D holds and rotates the workpiece in front of the MA1400 welding robot. For small parts, a pneumatic gripper allows for complex welding operations without a separate workpiece positioner. Remarkably low servo operating hours: only 838 hours. Main components: • 1 x Yaskawa MA1400 arc welding robot arm • 1 x Yaskawa HP20D material handling robot arm with a 20 kg payload capacity • Yaskawa DX100 controller with Master-Slave functionality Nljdez Rn Igepfx Ag Ioh • 1 x Fronius TransSteel 5000 arc welding power source • 1 x Yaskawa TCS-C automatic torch cleaning unit • 1 x Siegmund S16 welding table, 1500 × 1000 mm, with an aluminum frame, height-adjustable legs, and a plasma-nitrided steel tabletop. Includes 4 screw clamps, 8 quick-release bolts, 4 aluminum stops, and 4 aluminum squares. Part number: 2-WS161510.1 • 1 x Siegmund S16 Basic Set #2: 10 stops, 10 squares, 16 fastening bolts, 8 clamps, and a 6-piece accessory and maintenance kit. Part number: 4-161300 The equipment can be viewed by prior arrangement. Price: EUR 59,000 net.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail Nlodpfoz I Tahsx Ag Ish • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (at tel. ). Dorn-Tec multi-finger grab MF2-R7 / incl. MS03 quick coupler / incl. rotator / in stock & immediately available / good condition Price: €3,490.00 net / €4,153.10 gross Approximate own weight: 222 kg Equipment: - incl. rotator - incl. MS03 quick coupler - incl. hoses (see photos) In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. Nlodpez H Hvyofx Ag Ieh We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Holp range! Errors and prior sale excepted! Internal ID: 230135 = Further information = Intended use: Construction Unladen weight: 222 kg Please contact Marius Herden for further information.