Used Injection Molding Machine Control Panel for sale (91,972)

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Lhodpfx Afsznbqqjtei

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Ljdpszna T Refx Aftshi

Condition: excellent (used), Year of construction: 2020, operating hours: 12,436 h, functionality: fully functional, machine/vehicle number: 254633, clamping force: 500 kN, screw diameter: 30 mm, We offer this very well-maintained Arburg ALLROUNDER 320 C 500 - 170 machine, manufactured in 2020, including an integral picker. - Golden Edition model with SELOGICA direct control - Clamping plate set with central injection position and centering diameter of 125 mm Ledpfxezmvi Ej Aftehi - Plasticizing cylinder set 30 mm (without nozzle) - Open nozzle 30 mm with internal thread M 24 x 1.5 - Granulate container, stainless steel, 50 l The machine is in very good condition and is being sold from current production. Loading and transport are not included in the price and are the responsibility of the buyer. Collection is possible from September 2026. Machine location: 47574 Goch If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2003, Clamping force: approx. 50 tons Lhodpfx Aezlhxioftoi Components: 1 Horizontal screw diameter: approx. 30 mm Core pull: 0 Hot runner zones: 0 Flow rate: approx. 130 l/min Frequency: 50 Hz Power supply: 3/N/PE AC 400 V Pressure: approx. 210 bar Current: 94 A Weight: approx. 3.3 tons

Condition: used, Year of construction: 2022, Operating hours: 22932 Clamping force: approx. 550 t Lhsdozlhdropfx Aftji Number of components: 1 Mold installation height: approx. 350 / 1100 mm Opening stroke: approx. 1300 mm Tie bar distance: approx. 830 × 920 mm Horizontal screw diameter: approx. 65 mm L/D ratio: 1 / 21.5 Core pull: 4 Special equipment: Additional unit (not for high glass fiber content); needle shut-off Hot runner zones: 32 Heating power: approx. 33 kW Frequency: 50 Hz Power supply: AC 400 V 3P/N/PE Current: 228 A Motor power: approx. 63.5 kW Installed power: approx. 137 kW Short-circuit rating: approx. 25 kA Machine weight: approx. 22.0 t

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Lhjdpfx Ajzlg Uvoftoi Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Lhjdpfxozlg S Io Aftei Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Lodpjzlg N Hjfx Aftjhi Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t

Condition: used, Year of construction: 2014, Operating hours: 27,317 Clamping force: approx. 180 t Lsdpfx Aezlgvyjftjhi Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28

Condition: used, Year of construction: 2015, Operating hours: 52873 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Ljdpezlgu Nefx Aftshi Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 8877 Clamping force: approx. 180 t Number of components: 3 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 34 Frequency: 50 Hz Supply voltage: 400 V Lhodszlgkdspfx Aftoi Approximate weight: approx. 10.1 + 0.6 t

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. Lhsdpfx Afszlfmkotei FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: used, Year of construction: 2015, Operating hours: 48039 Lhsdpfx Afjzlfmwetoi Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Ledszmrf Njpfx Aftohi A linear robot is included, but it has never been used and was probably not programmed.

Condition: used, Year of construction: 2022, Operating hours: 45851 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Lodpfszlfl Hjx Aftehi Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 39326 Clamping force: approx. 100 t Number of components: 1 Tie bar spacing: Tie-bar-less Horizontal screw diameter: approx. 40 mm Core pull: 0 Lhjdpszlffyjfx Aftei Hot runner zones: 4 Clamping system: Toggle (KH) Max. stroke: approx. 175.0 mm Screw speed: approx. 420 rpm Heating zones: 4 Heating power zone 1: approx. 4.23 kW Heating power zone 2: approx. 3.00 kW Heating power zone 3: approx. 3.00 kW Heating power zone 4: approx. 3.00 kW Injection servo: No Measuring system: Incremental encoder Pressure sensor type: Diaphragm Temperature control: J-type thermocouple

Condition: used, Year of construction: 2017, Operating hours: 22,800 Lhodpfx Aszlfc Esftoi Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 26.8 t

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Lhsdpfx Aezldp Rsftji Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: excellent (used), Year of construction: 2004, Boy 90 M Year of manufacture: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Injection pressure: 1724 bar Metering volume: 214.7 ccm Clamping unit : clamping force: 90 t tie bar distance: 430x360 mm size of clamping platens: 635x610 mm ejector: hydraulic clamping unit: hydraulic Control: Procan - touch screen Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3100 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating power: 11,3 kW Total power: 26,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Lhodpozc I U Tsfx Aftei Price: Upon request

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. Lodpfx Aozc Naqjftohi It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m Lhsdpezc Ng Defx Aftsi All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Lhedpezc Nl Tsfx Aftji Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Arburg 370E 600-170 with Arburg Multilift Select robot / All-electric injection molding machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt All-electric machine: high-speed, energy-efficient, and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 24 zones Hardened injection unit – bimetallic Main motor: servo-driven with inverter for energy saving Injection unit driven by servo motor controlled by inverter Parallel movements Central lubrication Machine with two cylinders / nitrogen accumulator (extra charge for high-speed operation) Integrated Arburg conveyor belt and sorting flap Arburg Multilift Select robot, 6 kg, transverse Year of manufacture: 11.2017 4-axis robot: 3 axes servo-driven (electric), C axis pneumatically driven Lhodpezc Nm Rjfx Aftsi Stroke (axes): X-600, Y-800, Z-1800 mm Robot safety package Robot with adapter and safety housing Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 3600 kg Length/width/height: 4.00x1.45x2.04 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Lhsdpezc Nq Asfx Aftsi Price: On request

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Ledpfxjzc Nrms Aftehi Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request