Used Hp Scitex Fb750 for sale (7,150)

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Guodjzk Npgjpfx Aa Esd Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: used, Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm motor. Weight: Estimated: Kg1000.0 Dimensions: 1400mm X 1900mm Guedpjzimz Defx Aa Ejd

Condition: used, Year of construction: 2000, Gathering machine / booklet making Guedpfx Aaezictpe Ejd Theisen & Bonitz TB Sprint 314 flex HP with QSM 304 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B304 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  - Working direction: left to right - Capacity: Godpfxov Aag Do Aa Ejud - 0,187ml - 4500bph 4°C & 15°C - 0,375ml - 4500bph 4°C & 15°C - 0,750ml - 4000bph 4°C &  2900bph 15°C - 1500ml - 2000bph 4°C & 1500bph 15°C - Currently set up for: - Glass Bottles: - 0,187ml - 0,375ml - 0,750ml - 1500ml  - Caps/Corks - Cork (boucheuse liège) - Screw cap - Decorative Cap (Champagne style) - Incl. CIP and wine filtration

Condition: excellent (used), Year of construction: 2008, operating hours: 12,705 h, power: 265 kW (360.30 HP), gearing type: automatic, fuel type: diesel, first registration: 06/2008, color: other, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS - Armrest - Day Cabin - Hub Reduction - Hydraulics - PTO - Radio - Sper - Thick Axles = More information = General information Cab: day Technical information Engine capacity: 7.145 cc Drivetrain Drive: Wheel Axle configuration Brakes: drum brakes Front axle: Differential lock; Steering; Tyre profile: 80%; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction Weights Empty weight: 10.000 kg Carrying capacity: 3.350 kg GVW: 13.350 kg Max. towing weight: 40.000 kg Gusdozkg U Tepfx Aa Esd Functional Quick coupler system: Yes Interior Number of seats: 2 Condition Technical condition: very good Visual appearance: very good Financial information Ask about the lease options

Condition: good (used), functionality: fully functional, Year of construction: 1991, 1 hydraulic punching machine, manufacturer MUBEA, type HP 1000 / 760. Year of manufacture 1991, punching force 100 tons. Includes punching saddle for K 60-K260 and various tools, manually operated linear punching unit (grid rail 4 m), swiveling and with digital display, carriage clamp, and foot switch. Dimensions L x W x H: 1930 x 780 x 1980 mm. Outreach: 760 mm. Working height: 1135 mm. Punch: 40 in 22 mm. Stroke: 0 - 70 strokes. Stroke rate at full stroke: 11 strokes. Drive power: 8.5 kW. Gjdpfx Aszkg Sloa Eoud Weight: 3800 kg / 3600 kg. Used, in working order.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,990 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fuel type: electric, construction height: 1,315 mm, drive type: Elektro, Double-deck forklift Condition: Ready for use and fully functional Technical condition: good Gusdpeu Add Rjfx Aa Ejd

Condition: good (used), gasoline engine, gas engine, drive engine -1 cylinder Gedpfx Asc Innaja Eoud -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr Gedpfsd Duu Sox Aa Esud -Connection: 2 "inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V500/1.5 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 "inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V300/1.1 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg Gsdpod Duu Tsfx Aa Esud

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13.7 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S Godpfx Aaswmb Ebe Ejud Electrical data: 400V; 27A; 13,7kW Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2013 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Gedpfx Ajv D Hmaea Eeud Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 Gsdpfxewpm I Hj Aa Ejud - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Guodsw Nadyspfx Aa Esd Equipment and technical data: X = 1800 mm Y = 900 mm Z = 80 mm Made from 18 mm Koskisen panels, consisting of a milling table (X-axis), a gantry (Y-axis), and a Z-axis. Milling bed in 19 mm MDF used as a sacrificial plate with guide rails and T-slot nuts for clamping. Subframe with reinforcements, filled with polymer concrete, prepared for transport with pallet truck or forklift. Mechanical set consisting of profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control set consisting of a Triple Beast, for controlling 3 axes, with Ethernet interface. Leadshine driver for the fourth motor. Four stepper motors, 5.0A, 3Nm with motor cables, as well as power supply unit with 48V, 6.7A, LED board for breakout board, ribbon cable and proximity sensors, small parts like single-core wires, wire end sleeves, control cables, heat shrink tubing, and cable lugs. Fully installed in an aluminum enclosure including electrical wiring and emergency stop. 21.5 inch built-in monitor, including mini PC with Windows 7, CAD software Rhino 5.0, G-code generator Estlcam, control software Beamicon2, as well as mouse and keyboard, pre-installed in an ergonomic control desk. Tool length sensor for determining the length and updating the active zero offset. Special equipment: High-frequency spindle with 2.2 kW, including locknut, frequency inverter, line filter, braking resistor, and collet set. PC with 8 GB RAM and AMD processor CAD software Rhino 5.0 for creating both simple 2D data and 3D solid models Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Colour: Grey Weight: 6.000 kg Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Guodpfxewnhn Eo Aa Esd Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Camera lens, Edmund HP Series LEC-86571 Gusdpfxozgawte Aa Eed (Fixed focal length – 16mm) Image circle: up to 2/3" sensor format High-quality industrial lens for image processing, machine vision, and automation applications.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1872080, functionality: fully functional, pressing force: 100 t, table width: 1,500 mm, table length: 2,300 mm, oil tank capacity: 330 l, total length: 4,400 mm, total width: 3,200 mm, total height: 4,350 mm, overall weight: 18,000 kg, year of last overhaul: 2025, number of cylinders: 5, Equipment: CE marking, documentation/manual, Hydraulic press JOOS HP S 100/OK – 100 t – Year of manufacture 2005 Manufacturer: Gottfried Joos Maschinenfabrik GmbH Model: HP S 100/OK Year of manufacture: 2005 CE compliant Technical data: • Pressing force: 1,000 kN / 100 t • Maximum hydraulic pressure: 300 bar • Cylinders: o 4 × single-acting, Ø 90 mm o 1 × double-acting, Ø 100 / 70 mm • Cylinder stroke: 1,200 mm • Pressing area: 2,300 × 1,500 mm • Press chamber opening: 2,100 mm • Dimensions (L × W × H): approx. 4,400 × 3,200 × 4,350 mm • Weight: approx. 18,000 kg Gsdpfxezh Iwwj Aa Ejud • Hydraulic tank: 330 l • Hydraulic oil: ISO VG 46 • Sound power level: 88 dB(A) Condition: used, industrial machine Application areas: pressing, straightening, insert molding, joining, assembly Availability: upon agreement Loading/dismantling: possible upon agreement

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Liquids Guedpfx Aszh D Swja Esd Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile trimming unit (multi R1-R2), Flat trimming unit, The machine has NC control Max. element height: 60 mm Max. edge band thickness in roll: 3 mm, Feed rate: 11 m/min Original mileage: 80,000 meters, in my opinion, the technical condition is very good Possibility to inspect and test on site.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Gedpfxjxd T Rzs Aa Eeud Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts Gedpfx Aaezhudqe Esud • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: good (used), Year of construction: 2007, load capacity: 7,500 kg, total height: 1,700 mm, total length: 4,000 mm, total width: 1,600 mm, table width: 1,250 mm, rotary table diameter: 1,250 mm, table load: 7,500 kg, pivoting range: 200 °, input current: 600 A, Welding positioner KISTLER - HP 7500 MACH-ID 9657 Make: KISTLER Type: HP 7500 Year: 2007 Table Length: 1250mm Table Width: 1250mm Table load on 200 mm:7500 Rotation table: 0 - 1° Lifting chuck: 200° Guedpfx Aaezd T Nqs Ejd Table load:: 7500 Length: 4000mm Width: 1600mm Height: 1700mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), IPG Ytterbium Fiber Laser Here we offer you an IPG Ytterbium fiber laser. IPG Ytterbium Fiber Laser 90-240 VAC Type/Model Name: YLP-HP-2-1500-50-100 Condition: used Gjdpfx Aszd Rmaoa Esud Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm 10 mm/s 10 mm/s 1.1 kW 915 mm Gjdsynmzcopfx Aa Eeud 900 mm 450 mm 1130 mm 250 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request Gedpfx Aajwiq N Ij Eeud

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate Guedpfxeyu Undo Aa Esd