Used Horizon Collecting Machine for sale (67,944)

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Hsdpfxexqp Ivj Ap Hsnt Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: used, Year of construction: 2008, Deckel Maho DMC 55H duoBlock Horizontal Machining Center Horizontal Machining Center – Deckel Maho Type / Model: DMC 55 H DuoBlock Year of Construction: 2008 Condition: Used Program Run Time: approx. 66,600 hours Spindle Run Time: approx. 46,500 hours Technical Data Travel Ranges X / Y / Z Axes: 560 mm / 600 mm / 600 mm Rapid Traverse (X/Y/Z): 40 m/min Work Table & Pallet Changer (APC) Number of Pallets: 2-position pallet changer Pallet Size: 400 mm x 400 mm Max. Workpiece Weight: 500 kg Max. Workpiece Height: 850 mm B-Axis (Rotary Table): 360° (designed as an NC rotary table, usually with 0.001° resolution) Main Spindle: 12,000 1/min; HSK 63; approx. 38 kW Tool Changer (ATC) Tool Magazine: 40 magazine positions Tool Interface: HSK-A63 Max. Tool Diameter: 80 mm (up to 160 mm with free neighboring positions) Max. Tool Length: 330 mm Electrical Data Power Connection: 400V 3/N, PE 50Hz Power Consumption: 58 kVA Inrush Current: 84 A Hnodpfx Apjzxc Ewo Hjt Max. Pre-Fuse: 100 A DC Control Voltage: 24 VDC AC Supply Voltage: 230 VAC Dimensions, Weight & Control Machine Weight: approx. 11,000 kg to 13,000 kg (depending on magazine size and chip conveyor) Footprint (L x W x H): approx. 5.0 x 3.0 x 2.8 m (pure space requirement without peripherals) Control: Siemens Sinumerik 840D Equipment NC rotary table Tool measurement system BLUM Oil mist separator IFE-2000 Hydraulic clamping system Proportional amplifier Signal light Coolant system 980 l Coolant gun Rotoclear Chip conveyor Master probe OMP60 Operating mode 4 Quotation item: Transport costs in a separate offer

Condition: used, Year of construction: 2012, Deckel Maho NHX 4000 Horizontal Machining Center Horizontal Machining Center, Deckel Maho Type / Model: DMG NHX 4000 Condition: Used Year of Manufacture: 2012 Program Runtime: approx. 48,200 hours Spindle Hours: approx. 39,200 hours Technical Data Travel distances X / Y / Z axis: 560 mm / 560 mm / 660 mm Rapid traverse rate (X/Y/Z): 60 m/min Work table & Pallets: 2-way pallet changer, standard (APC) Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece dimensions (Ø x H): Ø 630 x 900 mm Pallet changing time: approx. 8.0 seconds B-axis (rotary table): 360° (division 0.001°, direct drive) Main spindle Max. speed: 12,000 rpm Hsdpfx Apozxc H Us Hsnt Drive power: approx. 11 kW Max. torque: approx. 110 Nm Tool interface: SK 40, tool changer STC Tool changer (ATC) Magazine slots: 60 magazine slots Max. tool diameter: 70 mm (with free adjacent slots up to 170 mm) Max. tool length: 450 mm Max. tool weight: 12 kg Electrical data Power connection: 400 V 3/N, PE 50 Hz Power consumption: 33 kVa In max.: 48 A Max. fuse rating: 80 A DC control voltage: 24 VDC AC supply voltage: 230 VAC Equipment 1: Smartline Line 36kW Equipment 2: NX15 Dimensions & Weight Machine weight: approx. 8,000 kg Footprint / Dimensions (W/D/H): approx. 2,680 x 2,540 mm Control: Siemens 840D SL Equipment Indexing table Tool measuring system, 60 tools SK40 Direct measuring system Tool breakage control MSC Coolant system IKZ 35 bar Chip conveyor Signal light Inquiry item: Transportation costs in individual offer

Condition: used, Year of construction: 2013, DMG DMC 65H duoBlock Horizontal machining center Year of manufacture: 2013 Operating hours: approx. 50,000 h Spindle hours: approx. 26,000 h Siemens Sinumerik 840D sl control system HSK 63 tool interface Spindle speed: 10,000 rpm 180-tool changer 10-position pallet changer (2-level, i.e., footprint equivalent to a 5-position pallet changer) Hnsdpfxsza Ezrj Ap Hst

Condition: used, Year of construction: 2009, total height: 2,500 mm, total length: 40,500 mm, total width: 2,400 mm, Colour: Blue Empty weight: 30.900 kg Price: On request 4 tool changers, 24 pcs each Plus external magazine 117 positions Drilling unit 2, 4x horizontal only Incl. Oertli tools Max. machining length 6 meters NEXUS Software (HMI) Output table 320x360 cm Operating hours cannot be read out Hnjdjzt Nadepfx Ap Hjt - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 113040 - Number of milling spindles [pcs.]: 6 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Min. spindle speed [rpm]: 0 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 20 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - └ Milling spindle 3: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 4: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.5 - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 24 - System/software: Nexus - Safety feature: Enclosed fence, Door interlock switches - Tools included: Yes - CNC options: Unloading system, Loading system, Label machine - Table length [mm]: 6000 - Table width [mm]: 3800 - Installed length [mm]: 26000 - Installed width [mm]: 9500 - Installed height [mm]: 2850 - Transport dimensions: 40500mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 30900kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, total length: 26,000 mm, Colour: White Empty weight: 9.000 kg Price: On request - Details: - └ Description: Includes the input/output system - Year: 2008 - Documentation available: Yes - └ Type Documentation: Maintenance history, Parts book, Assembly manual, User manual, Electrical diagrams, Operating system, Technical data - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: Hsdpfx Aszhr Rzep Hont - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 30000 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 36 - System/software: WoodWOP - Safety feature: Safety light curtain, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: 2BL2141 - └ Connection diameter [mm]: 50 - Tools included: Yes - CNC options: Unloading system, Offcut conveyor, Loading system, Label machine, Manual control - CNC documentation available: USB stick - Table length [mm]: 2500 - Table width [mm]: 1500 - Working range X [mm]: 5800 - Working range Y [mm]: 1600 - Z-axis working range [mm]: 535 - Voltage [V]: 400 - Current consumption [A]: 91 - Installed length [mm]: 12200 - Installed width [mm]: 9000 - Installed height [mm]: 3500 - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2009, condition: used, Number of carriers: 80, an on-site inspection is possible. Hnjdpfx Apsz Da N Is Het

Year of construction: 2002, condition: used, Number of carriers: 32, an on-site inspection is possible. Hnedpfez Da N Usx Ap Het

Year of construction: 1990, condition: used, Number of carriers: 16, an on-site inspection is possible. Hnjdsz Da Rfjpfx Ap Hst

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Additional information CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Hjdpfozzw Rtex Ap Hjnt Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Max. spindle speed: 10,000 rpm Excl. clamping on the table Tool holder: SK 40 X: 610 mm Y: 510 mm Z: 510 mm Hnedey U I H Iopfx Ap Hst Tool changer

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Hodpfx Ajx Rhlcsp Hsnt Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, Control Siemens In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hnodpszzrhtofx Ap Hst Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Hnsdpfx Asz Arzvep Hjt

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 4-axis machine X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Hsdpfjz Aq Dpex Ap Hjnt Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: good (used), Year of construction: 2000, functionality: fully functional, 2x MAZAK horizontal machining centers + FMS with 12 stations and 2 loading/unloading bays Model: FH 5800 Year: 2000 Hnjdsz Apgcepfx Ap Hst Maximum workpiece height: 710 mm Maximum table load: 500 KG X-axis travel: 710 Y-axis travel: 610 Z-axis travel: 660 Spindle connection: BT Maximum spindle speed: 12,000 Spindle power: 22 KW Table size: 500 x 500 Table indexing: 1 degree Tool magazine capacity: 120 tools per station High-pressure system through the spindle: 50 Bar, with a separate tank and paper filter Maximum workpiece diameter: 720 mm Tool presetting with contact probe for length and tool presence Chip conveyor: belt type

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Hnsdpsz Apb Tofx Ap Het Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horizontal machining center MAZAK Model: HCN 6000 Year: 2011 Control unit: MAZATROL MATRIX 2 X-axis travel: 800 Y-axis travel: 800 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece size (length x width x height): D.900 x H.1000 Table surface: Tapped holes Maximum workpiece weight: 1000 Spindle speed: 7000 Spindle connection: ISO 50 Torque (continuous / 10 min): 680 Nm Rapid traverse rate X-axis: 60000 Rapid traverse rate Y-axis: 60000 Rapid traverse rate Z-axis: 60000 Number of tools: 60 Maximum tool diameter: 250 Maximum tool length (from reference line): 500 Tool selection method: Fixed Maximum tool weight: 30 Kg Tool change time: 5 sec. Pressure: 50 BAR Height: 3350 Width: 2820 Hodpfoz Apacsx Ap Hent Depth: 6755 Weight: 14700 Tool kit included

Condition: good (used), Year of construction: 2006, functionality: fully functional, Leadwell horizontal machining center Model: LCH-500 Year: 2006 Table size: 500 x 500 mm Control unit: Fanuc O-i MC X-axis travel: 700 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Maximum spindle speed: 10,000 rpm Hnjdpfxoz An Ure Ap Het Spindle connection: ISO 40 Spindle power: 18.5 kW Chip conveyor (belt type) Pallet changer High-pressure system at 20 bar through the spindle

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism Hnodpfozk Nupsx Ap Hjt LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2023, Second-hand machine Year of manufacture: 2023 Condition: as good as new, only a few drill holes made Hjdpfx Apozk Ni Te Hjnt Features and technical specifications: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Work table rotation: ±60° Work table length: 565 mm Work table width: 315 mm Extraction nozzle diameter: 90 mm Output power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Features and Technical Specifications: - Drilling depth adjustment via a maintenance-free linear guide Hjdpfx Aszk Nlnep Hont - Efficient and economical operation thanks to the quick-lift system; no more laborious cranking - Smooth-running, infinitely adjustable drilling unit - Height adjustment with fine tuning and a gas spring cylinder for weight compensation - Cross-travel and height adjustment with scales and adjustable stops - Vibration-free operation thanks to a robust steel construction - Drilling depth adjustable via a scale and stop - Drill head height adjustment can be fully utilized for vertical slotting - Large-dimensioned gray cast iron table with a ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Swiveling drill head: -60° to 60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drilling table height: 830 mm - Dimensions: 1,200 × 1,050 × 1,300 mm - Weight: approx. 240 kg

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 Hnedpfx Apoxtbgps Hot - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. Hnsdpfx Apjxwl Tbj Hot This is a complete workstation. Weight approximately 200,000 kg.

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a Hnsdpfx Apogvkmro Hjt universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.