Used Holder C 55 Sc for sale (61,417)

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Psdpfx Ajzg Ty Uef Sorb Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, Year of construction: 2010, number of aggregates 2 St. working width 2000-3500 mm work height max. 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----- Manufacturer’s technical description: M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm Max. window thickness 160 mm 190 or 250 mm* Max. window weight 150 kg 200 or 400 kg* Loading station 2000 mm 3500 mm Unloading station 2000 mm 3500 mm Choice of silicone: Standard 1 colour 2 or 3 colours Master head 1 2 Sealing of timber panels no yes Formulation adapted to the type of elements no yes Synchronised conveyor belt no yes for heavy loads and/or conveying in both directions Double movable crossbar for flush-mounted hinged window sashes no yes *Please contact us for greater thicknesses or weights Optimisation of the sealing process: The M9Cb robotic sealing system revolutionises the sealing process by injecting exactly the right amount of silicone, thereby preventing unwanted streaks. It enables the glazing beads to be ‘nailed’ invisibly and saves the time required to cover the nail heads. The precision ensures high-quality, uniform sealing, which guarantees optimal watertightness whilst maximising the clarity of the units. With a feed speed of approx. 2 metres per minute, it offers fast and efficient processing on both sides simultaneously (on average 4 minutes per unit). More space available: No more lack of space in the workshop! The M9Cb operates vertically and therefore takes up very little floor space. Leaning against a wall or partition, it frees up the space previously occupied by horizontal sealing tables. In addition, a strategically positioned conveyor belt can also serve as a vertical glazing table, thereby optimising the layout of the work area Automation of sealing: To ensure a seamless seal, it is no longer necessary to juggle the window unit or struggle with fitting seals. The M9Cb automates this laborious process on both sides Time savings: Thanks to the M9Cb, the workflow is no longer one-dimensional. Whilst the machine takes care of sealing the windows and doors, the operator can work on other tasks, e.g. glazing, blocking, packaging... This versatility enables the operator to diversify their activities Pedszmy Ifspfx Af Sjrb and thus offers them a more rewarding experience. ----- ----- Price of the above machine on request! -----...

Condition: used, Year of construction: 2001, Used hydraulic press brake Speedy - Model SC 16.5 CNC small - mobile - versatile Working length 550 mm Technical data: Year of manufacture: 11/2001 Manufacturer: TEDA Model: SC 16.5 CNC The machine is powered and can be inspected by appointment! Max. pressing force: 160 kN Max. return stroke force: 0.8 kN Distance between uprights: 380 mm Overhang: 200 mm Length, max: 550 mm Distance between table and ram: 400 mm Stroke, max: 250 mm Speed: - Approach, max: 100 mm/s - Working stroke, max: 10 mm/s - Return stroke, max: 125 mm/s Back gauge: X-axis – travel: 400 mm Rapid traverse: 200 mm/s Speed 50 mm before lower tool: 33 mm/s R-axis – travel: 120 mm Working pressure: 210 bar Installed power: 1.6 kVA Weight, unpacked: 1320 kg Connection voltage: 380 V Prodpfx Aezzafyjf Sjb Frequency: 50 Hz Measured settling time: 60 ms Safety distance: 96 mm Tool weight, max: - Model 31301-90-P08 L=550 mm: 25 kg - Model 41004-85 L=550 mm: 8 kg Processable sheet metal cutouts (approximate values) - Dimensions: 550 x 800 mm - Thickness: 5 mm - Weight: 16 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Prodpfszugnhjx Af Sjb

Condition: like new (used), Year of construction: 2021, OMAG AFFRI WIKI 90 JS-C – Automatic Vickers/Knoop Hardness Tester | 2021 | Excellent Condition For sale is a professional, automatic OMAG AFFRI WIKI 90 JS-C hardness tester from the renowned Italian manufacturer, AFFRI. The unit is from 2021, is fully functional, complete, and ready for operation. This hardness tester is designed for precise hardness measurements of materials in quality control laboratories, research and development departments, and manufacturing plants. It is equipped with a digital measuring system with a camera and a computer with dedicated software that enables automatic analysis of indentations. Technical Specifications * Manufacturer: OMAG AFFRI (Italy) * Model: WIKI 90 JS-C * Year of manufacture: 2021 * Condition: very good, fully functional * Power supply: 115–230 V Podpfx Afozkpptj Ssrb * Weight: approx. 70 kg * Made in: Italy Equipment * Control computer with software, * Digital measuring system with camera, * XY measuring table, * Complete cabling, * Emergency stop switch, * Ready for immediate operation. Application The device is ideally suited for hardness measurements using the following methods: * Vickers (HV), * Knoop (HK), * (depending on the configuration, also other measurement methods). Ideal for laboratories, the automotive and aerospace industries, toolmaking, and quality control. Please send a specific price offer.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, For sale is a 6-axis placement robot from Erowa, this was used to load 2 die-sinking EDM machines from Ingersoll, both with tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package Technical data: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° Prsdpfotdrkqjx Af Ssb A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m Disassembly, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Westtech Woodcracker C550 Immediately available Equipment: - Collecting grapple - Endless rotating tiltator - Autospeed function - Cutting diameter for softwood: 600 mm Pjdpjyfu E Rsfx Af Sjrb - Cutting diameter for hardwood: 550 mm - Grapple opening width: 1,600 mm - Shear opening: 900 mm - Hydraulic flow rate: 100–190 l/min - Hydraulic flow for auxiliary functions (e.g. rotation): 50–70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle service weight: 24–30 t - Integrated Multigrip Also available from stock with Powertiltator! Adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We can supply the complete range of Westtech Woodcracker products for you! Rental possible = Additional information = New: Yes Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Prjdszzaxajpfx Af Sjb Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Pjdpfxezzli Ro Af Sorb Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: used, Second-hand machine Predjzk Nvmopfx Af Ssb Long-belt grinding machine Motor power: 4 PS / 3 kW Motor speed: 2,890 rpm Table dimensions: approx. 2,460 mm x 900 mm Manual table height adjustment Transport dimensions: approx. 3,600 x 1,600 x 1,450 mm Weight: approx. 500 kg Availability: at short notice Location: Röllbach

Condition: excellent (used), Huber CC-520w vpc cooling/heating bath and recirculating thermostat Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Offered is a used Huber CC-520w vpc cooling/heating bath and recirculating thermostat with water-cooled refrigeration unit and Compatible Control CC2 regulation. The unit features an integrated stainless steel temperature control bath and connections for external temperature control applications. It is suitable for laboratory, testing, and industrial temperature control processes, as well as for cooling and heating connected devices. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: CC 520 Type: CC-520w vpc Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 14.5 A Refrigerant: R507 Refrigerant quantity: 1.55 kg Max. pressure: 25 bar CFC & H-CFC free Operation via Compatible Control CC2 with display, SET/MENU buttons, and rotary encoder. Available interfaces/control connections: CAN, POKO ALARM, AIF REG+E-PROG, ECS STANDBY as well as RS232/RS485 SERIAL. Dimensions: Dimensions W × D × H: approx. 539 × 629 × 1102 mm Weight: approx. 161 kg Equipment: Compatible Control CC2 controller Integrated stainless steel temperature control bath with lid Water-cooled refrigeration unit Connections for external temperature control circuit Cooling water connections Movable stainless steel housing on castors Electronic interfaces and alarm/control connections Shipping information: Due to a device weight of approx. 161 kg, shipping by freight forwarder is planned. Prsdpfx Afozukkms Seb Dimensions of the device approx. 539 × 629 × 1102 mm. Condition: Used condition with noticeable signs of wear and tear due to age and use, dirt, scratches, and partial corrosion/rust marks. Scope of supply: 1 × Huber CC-520w vpc cooling/heating bath and recirculating thermostat with Compatible Control CC2. Scope of supply as shown in the pictures. The unit is available upon agreement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC55 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Predpfoncd Diox Af Sjb Model: NWC55 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G2, 4 cylinder, water cooled Generator: Newpower NW/N55 Continuous power: 40 kW / 50 kVA Maximum power: 44 kW / 55 kVA Connection: 4P circuit breaker, 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 2400x1000x1400 mm Weight: 1213 kg Diesel tank: approx. 125 L. (possibility to connect to an external tank) 100% load approx. 10.1l/h 75% load approx. 7.9l/h 50% load approx. 5.3l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, Year of construction: 2002, operating hours: 2,619 h, Bobcat 553 Prjdpfxozng Tke Af Ssb Cabin, bucket, pallet fork.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 210610, The PIONIER POWERvac 55 H is available for rent The POWERvac is an industrial vacuum cleaner suitable for all types of dust, shavings, oil, and water. This H-class version is designed for hazardous fine dusts regardless of MAK value, including carcinogenic and pathogenic dusts, with clean air recirculated back into the work area. Suction takes place in three stages: cyclone separation of liquids, coarse dust and shavings; fine dust separation via the PTFE-coated main/pocket filter; and a final safety filter stage for remaining fine dust. The main filter uses pneumatic POWER shock cleaning during operation (no extra compressed air required), and the mechanical centrifugal separator is maintenance-free. - Motor power: 5.5 kW - Airflow: 520 m³/h - Main filter area: 22,600 cm² - Total max filter area (with safety filter): up to 47,600 cm² - Collection container capacity: 100 litres Psdpfx Afozy H R Te Sorb - Suitable for continuous operation

Condition: excellent (used), RS-Simulators Temperature Shock System ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Type: ST2K 1000 / 55 Design: Temperature Shock System Cooling: water-cooled Description Used temperature shock system for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Application in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover for temperature shock tests Temperature ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test chamber Volume: approx. 580 liters Internal (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: unpressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm) Observation window Internal lighting Controller SE-604 Program operation and data logging RS232 interface Refrigeration system Refrigerant: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating data: Operating hours: approx. 4,500 hours Sound level: approx. 67 dB(A) Environmental conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rel. humidity Scope of supply: RS-Simulators Temperature Shock System ST2K 1000 / 55 Scope of supply as shown in the pictures Functional test Refrigerant service Leakage test Condition: Used. Condition: see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Prodpfx Ajy H Igfsf Seb Subject to changes and prior sale. If you have any questions, please contact us.

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operating side: Left in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height infeed/outfeed: approx. 860 mm + 100 Output: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230 V AC, 50 Hz, 1 phase + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar Prodpfxetzcd Ss Af Sob External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 28926

Condition: ready for operation (used), * Brand: Mogensen Podjywl Rvopfx Af Ssrb * Model: Bar Sizer * Type: VX 2558 * Dim.: 6000 x 2400 mm * Execution: 5 steps * Bars: length 950 mm, diameter 30 mm Ø, distance C.C: 36 mm

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Prodpfx Ajzt R D Ref Ssb Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Weather-Independent Butt Fusion Welding at Industrial Standards Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) Prjdpfxoyzn Ife Af Seb (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Year of construction: 2020, condition: good (used), Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC Prsdpex Ei Twsfx Af Sjb -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 3x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD239, ABUS overhead crane runway bridge crane hall crane crane Load capacity / lifting capacity: 1t - 1000kg Track gauge: 6550mm, external dimension approx. 6700mm Year of manufacture: 1989 with floor control Lifting height: 6m Hoist: GM810 F6 Construction height from top edge of crane to hook approx. 610mm End carriage length with buffer approx. 220cm Includes: 10m HEB160 running rails and 10m conductor rail The crane is dismantled and immediately available. Very good condition, inspection book available. Pillar and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, in addition to Errikla, Hadef, Stahl KT 2000, etc. Psdpfx Afjxmuu Ts Serb Shipping via carrier possible, please inquire with postal code Collection preferred.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 S ALUMİNYUM FREZE MAKİNESİ, • Used for machining lock handle positions, hinge and espagnolettes slots, and custom-sized channels on aluminium and plastic profiles • Copying fixture suitable for the required operation • Independent channel milling feature via guide stop, in addition to copying fixture • Powerful 1.1 kWh / 1.5 HP motor • 13,500 rpm milling motor speed • 220 / 230 VOLT, 50/60 HERTZ • 5 mm milling cutter supplied as standard Prodpfx Afsydu Hrs Ssb OPTIONS • Base cabinet system • Pneumatic system

Condition: used, Field of application: Mining Pjdjyf Utnjpfx Af Ssrb Plant Model PTK156 Drive Hybrid Motor Volvo-Cummins-Perkins Tier 3-4 Top Deck Size 5,000 x 1,500 mm Bottom Deck Size 5000 x 1,400 mm Weight: 34,500 kg Transport Dimensions (mm) 16,500 x 3,250 x 3,400 Operation Dimensions (mm) 17,400 x 14,400 x 4,450

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC55 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC55 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G2, 4 cylinder, water cooled Generator: Newpower NW/N55 Continuous power: 40 kW / 50 kVA Maximum power: 44 kW / 55 kVA Connection: 4P circuit breaker, 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 2400x1000x1400 mm Weight: 1213 kg Diesel tank: approx. 125 L. (possibility to connect to an external tank) 100% load approx. 10.1l/h 75% load approx. 7.9l/h 50% load approx. 5.3l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Pjdpfx Afsnkaprj Sorb Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, Year of construction: 2023, The Newpower Generator proudly presents their new NWC55 emergency generator set with soundproofing. The unit is new, complete including control, diesel tank, exhaust batteries, electronic speed controller, AVR, battery charger, cooling water heater, turbocharger, sockets, FI protection circuit breaker. Technical specifications: Model: NWC55 emergency generator with sound insulation Cummins Engine Newpower generator set Engine : Cummins 4BTA3.9-G2, 4 cylinder, water cooled Generator: Newpower NW/N55 Continuous power: 40 kW / 50 kVA Maximum power: 44 kW / 55 kVA Connection: 4P circuit breaker, 1x5P 63A, 1x5P 32A, 1x5P 16A, 2x2P 16A Schuko sockets Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH) : 2400x1000x1400 mm Weight: 1213 kg Diesel tank: approx. 125 L. (possibility to connect to an external tank) 100% load approx. 10.1l/h 75% load approx. 7.9l/h 50% load approx. 5.3l/h additional costs 100A automatic switch € 620 250A automatic switch € 1080 Podpjnkapvsfx Af Sorb Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address