Used Himmel C-25 for sale (63,654)

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 770 mm, total length: 1,220 mm, total width: 500 mm, Tested forklift battery for your forklift - 48V 6PZS 930Ah - DIN C + 1 year warranty + includes Aquamatic filling system + includes end discharge cables & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 500 mm Height: 770 mm Weight: approx. 1,350 kg Compatible with the following models and others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 16 - 1120-00 Linde R 16 - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R. 20 - 1122-00 Linde R 20 F - 8923-00 Linde R 20 F - 8923-00 - side battery change Linde R 20 G - 1120-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 HD - 1120-00 Linde R 20 HD - 1120-00 - front battery change Linde R 20 W - 1120-00 Linde R 20 W - 1120-00 - front battery change Linde R 25 - 1120-00 Linde R 25 - 1120-00 - front battery change Linde R 25 F - 8922-00 Linde R 25 F - 8922-00 - side battery change Linde R 25 F - 8922-00 - vertical battery change Linde R 25 F - 8923-00 - side battery change Lsdpfx Afsy Rnttotjad Linde R 25 F - 8923-00 - vertical battery change Linde R 25 W - 1120-00 Linde R 25 W - 1120-00 - front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Lajdpfx Ajy Rnr Aoftsd Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system Laedjy Rnrispfx Afted + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 778 mm, total length: 1,220 mm, total width: 273 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – special tray + 1-year warranty + Including aquamatic system + Including end discharge cable & REMA 320 connector (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 273 mm Height: 778 mm Weight: approx. 730 kg Suitable for the following models (and more): Still FM-X 12 Still R 60-25 Jungheinrich ETM 214 Heli CPD 10 Heli CPD 15 Toyota 6FBRE14 Toyota 7FBRE16 Toyota 7FBRE16N Toyota/BT OME 100 H Toyota/BT OP 1000 SE Toyota/BT OPW 1200 HSE Toyota/BT RR-B 1 Toyota/BT RR-M 14 Toyota/BT RRE 140 Toyota/BT RRE 140 E Toyota/BT RRE 140 M Toyota/BT RRE 160 Toyota/BT RRE 160 M Crown ESR 5240 Laedpfx Afsy Rnkxjted Caterpillar NR14N2 Cesab R112 Doosan B15NS Doosan B18NS Doosan B20NS Hubtex EASY Hyundai 16BRJ-9 Rocla HS14F Rocla TEF14 Rocla TEF25 Sichelschmidt 5929 Sichelschmidt M925 Sichelschmidt M930 Other common battery sizes available – please enquire. Delivery available.

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Lodpfx Afsy Emrkjtead

Condition: like new (used), 25 linear meters of Nedcon pallet racking New goods, see pictures! A top-quality racking system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with its headquarters in the Netherlands. Height 3.5 m Depth 110 cm, blue Beam length 2.7 m, orange Beams with load capacity/bay 3050 kg Negotiable price: €3,290.00 net ex warehouse The offer includes: + 10 units of pre-assembled frames, depth 110 cm, height 3.5 m + 36 units of beams, length 2.7 m, 3050 kg load capacity/bay + 72 units of locking devices + 20 units of concrete anchors Load capacity signs, documents, etc. are, of course, included. Further accessories can be found in the accessories catalog. Frames blue RAL 5019, infill panels galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads possible upon request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible upon request. Other configurations available upon request. Over 2000 meters available. Inspection possible at any time by appointment. Further information on request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Purchase/Sale: We are constantly looking for and offering numerous items from various areas: complete liquidation of business premises business closures Laedpfjfi U Aijx Aftjd fast, flexible, and efficient! We also clear and/or dispose of goods for insolvency administrators. Write to us with a few keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 828D, _____ Description: Year of manuf. : 2012 Control : Siemens 828D Turning diam. : 280 mm Turning length : 558 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):15 kW Torque (max.):179 Nm Barcapacity:65 mm Workpiececlamping I:Collet chuck, Ortlieb TS 65/6D Workpiececlamping II:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Subspindle: Technology:Motorspindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):48 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N 170-43 Ljdpfxeznqyne Aftead Movement in Z:650 mm Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT Tooldrive:4.000 rpm Movement in X/Y/Z:260/110/620 mm Eilgang in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure Toolmeasurement:Automatic Measuringarm, Renishaw RP 3 Rawmaterialfeed:Barloader, MKE HL 12 pneumatic Finishedpartremoval:Partstray with conveyor belt Oilmistseparation:Mechanical extraction, Sara UC1 SD Toolholder:Misc. static and driven toolholder Further Accessory:Misc. used clamping heads and spindle reducers

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Lodpfsx Twdyjx Aftoad

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Flatbed Trailer 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Side board height: 40cm Loading platform height: 71cm Total weight: 2000Kg Payload: 1636Kg Braked tandem-axle flatbed trailer Overrun brake and parking brake by KNOTT 2x 1000Kg axle and brake with reverse automatic Bolted and hot-dip galvanized steel frame Galvanized steel sheet side boards with safety latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Support wheel 6x lashing eye 13" tire M+S tire Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lights with reversing light and triangular reflectors 2x U-shaped chock OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE, FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder Ledpeww A Dtefx Aftsad -Integrated ramp, aluminum or steel -Folding crank rear supports -Anti-theft device -Net with fine or coarse mesh -H-frame -Replace steel side boards with aluminum side boards -Leaf screen in various heights, also closed -Extension side boards, aluminum or steel -Flat cover with or without rail -High cover 140cm -Automatic support wheel Further accessories available on request! Plus freight to Gera and vehicle registration document 150 € net Pictures are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, including for caravans. Wide range of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy. Lajdpfx Afjzd T Tijtsd

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12439 Laser hours: 3476 Build volume: 250x250x185 Gallery with manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ Lodpszm Ub Hjfx Aftsad With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2011, compressor operating hours: 5,308h, diesel engine operating hours: 8,002h, 5x drill rods, drilling head, dust collector, immediately ready for use, good condition, German machine. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our website. Subject to prior sale and errors! = Further Information = Laedpfx Afozm Eq Estsd Intended use: Construction Please contact Tobias Ebert for more details.

Condition: used, mileage: 456,000 km, power: 316 kW (429.64 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: Lsdpfjzm Ekxox Aftsad FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: used, mileage: 456,000 km, power: 316 kW (429.64 HP), first registration: 04/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 8,500 mm, loading space width: 2,550 mm, loading space height: 1,150 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2543 Platform 8,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 456 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 850 x 255 x 115 (L x W x H) Ledpfx Afszm Ei Uetjad CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 575/135 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 33002 - EH C + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 3850

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Iveco 180E32K Wheelbase: 4,185mm, New vehicle, not yet registered. 2-year factory warranty from initial registration. Color: White, Code 50105 IC 194. Transmission (9 gears), Euro 6. Ready for DELIVERY The following accessories are included: 00015 – Axle ratio 5.29 00131 – Differential lock 00166 – Tubular rear bumper 00541 – Battery disconnect switch 08289 – Preparation for toll system 05899 – Right-hand driver's seat armrest 00640 – Mechanical tilting roof 07747 – Dirt-resistant, easy-to-clean interior 00553 – Headlight protection grille 02085 – Trailer socket for 24-volt operation 00430 – Trailer version for towing 05210 – ZF power take-off 06319 – 360 ccm air compressor 06403 – Tipper version 00219 – Two wheel chocks 00568 – 143 Ah batteries 00590 – Seatbelts 00632 – Sun visor 00693 – Electric windows 01483 – Preparation for PTO 02096 – Heated dryer 02181 – Central engine exhaust 02211 – Warning triangle 02463 – Cruise control 02650 – Manually adjustable air conditioning 02662 – Anti-splash mudguards 02688 – Heat-reflecting glass 02714 – Electrically adjustable and heated rearview mirrors 06150 – Rear cross member, D-value 100 KN 02912 – LDWS (lane departure warning system) 02289 – Heated fuel filter 04572 – Expansion module 05456 – Rearview mirrors for body mounting, 2500 mm 05534 – First aid kit 06555 – Fog lights 06620 – Comfort driver's seat Lasdpfsxybrrjx Aftjd 06629 – Headrests 06617 – Passenger seat for 2 persons 06891 – Immobilizer 07440 – Weight limits 7,500-12,000 kg 75181 – Audible reversing alarm 08277 – Heated urea tank 08297 – EVSC (electronic stability control) 75056 – LED daytime running lights 01395 – Bluetooth radio 75499 – 200-liter fuel tank 05267 – 30-liter AdBlue tank 75502 – Air filter unit on the right, in the rear of the cab 77023 – EBS (electronic braking system) 06314 – 70° alternator 06318 – 225 ccm air compressor 20790 – Tires 315/80 R 22.5 07700 – Jack 02443 – Leather steering wheel with controls 00191 – Radiator protection 00160 – Front bumper, sheet metal 00744 – Window behind the cab 02210 – Spare wheel 02721 – Spare wheel carrier on the side of the chassis 08554 – Semi-elliptical leaf spring suspension with trapezoidal spring on the rear axle 08551 – Semi-elliptical leaf spring suspension with trapezoidal spring on the front axle Emails will not be answered. If interested, please call us. Sales only to businesses or for export. Subject to prior sale and errors.

Condition: used, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 09/2005, loading space length: 7,500 mm, loading space width: 2,360 mm, loading space height: 1,400 mm, loading space volume: 25 m³, Equipment: ABS, Schmitz Gotha SKI 22 tipper body, 25 m³, lift axle Internal number for inquiries: 0726643 * Condition: very good * First registration: 09/2005 * Permissible total weight: 33,000 kg * Unladen weight: 6,110 kg * Tipper * ABS Ledpfx Afezm Dp Hjtjad * BPW axles * Drum brakes * Access ladder at the front * Underrun protection * Tarp Dimensions (loading area/cargo bed): * Loading area length: 7,500 mm * Loading area width: 2,360 mm * Loading area height: 1,400 mm Tires: 1st axle: 445 / 65 R22.5, 25% air-suspended lift axle 2nd axle: 445 / 65 R22.5, 25% air-suspended ----Price: 4,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish and…? Typographical errors, errors and prior sale are subject to change.

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Lsdpfxozlidts Aftjad Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: ready for operation (used), Rexroth MAC071C-0-GS-3-C / 095-B-0 Permanent Magnet Motor, part number: R911252732, serial number: 7162420000052, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdpfx Aji D Nfujftod

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lajdpfsi D Hmhjx Afted

Condition: new, Heidenhain LC 192F length measuring system, ML 340 mm, part number 387093-25, serial number 17500653G, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Ledpfxsi Eal He Aftead

Condition: ready for operation (used), Bosch ASM 25 Servo Drive SN: 302650 DC 520V, used, normal signs of use, 100% functional, delivery contents as per photos Lodomgwufopfx Aftjad

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 12254, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Lodevy N Sqepfx Aftead

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32 Lajdpfx Afsx A Tc Ijtjd

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Laodpfx Ajy Nkpusfted Number of controlled axes: 4 axes Total number of tool changer positions: 28

Condition: used, Year of construction: 1991, machine/vehicle number: 91040170, 2 Head Wire Stitching Machine Hohner ACCORD 25/402-head wire stitcher for block- and saddle stapling Year 1991 - Serial-No. 91.040.170 Laedpfsn Apntjx Aftod Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test