Used Heyl Osmosis System / Water Treatment for sale (42,197)

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid swelling during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing is possible using a water mixing and dosing device + water-carrying parts are made of stainless steel and require no cleaning + hygienically flawless, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel cooling evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing devices with only 2 inlets (cold / warm) + €349.00 net Hsdpfxsivdvko Ahgot Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling capacity*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with 12 months warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid hydration when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: Hsdpfx Ajivdu Ushgst + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L60): + €399.00 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg Hjdpfeivdvvsx Ahgjt - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration during mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit Hodpfx Aeivdv Djhgot + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multi-tube stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra cost: - 3-way diverter valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters/hour - Peak cooling capacity*: 500 liters/hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Connection values: 400 V - 50 Hz - 1 phase - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 25 liters/minute - Dimensions: 1170 x 630 x 770 mm (L x W x H) - Net weight: 145 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets. Hedou Nad Topfx Ahget

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Hsdpfx Ahsy H Egveget Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Hodpfsy H E Sljx Ahgst

Condition: good (used), Flocking System / Dual System, with two sludge transport trolleys. Width: 2600 mm Height: 2860 mm Depth: 1400 mm Hsdpfjzdzuuex Ahgot Weight: approx. 2000 kg including transport trolleys (2 pieces) Condition: good, second-hand

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Hjdpfeyz Dhzex Ahget Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Hsdpfsy Ty Saex Ahgst Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg In good condition.

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum Hedpfodzqn Uex Ahgst + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: used, Year of construction: 2016, Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display Additional title: Reverse osmosis for desalination of raw water Flow rate: 6000 l/h depending on the blending quantity Max. operating overpressure: 14 bar Recovery appr.: 82 % Water: 5-7 m3/h; 1-10 bar Hsdpfx Aoyxnffjhgot Operation / Control: Switch cabinet with touch display Features: 2 pressure pipes, each with 2 membrane modules; sampling taps; fine filters; flushing stations; chemical dosing stations; high-pressure pump; automatic fittings; measurements of pressure, flow, conductivity, temperature and pH value;

Condition: used, Additional title: reverse osmosis Permeate capacity: 8000 l/h Feed: 10000 l/h Hsdexzquljpfx Ahgot Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6,5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2,5 - 5 bar Operation / Control: Simatic S7-300 Base construction: mounted on stainless steel frame Features: sterilising filtration; two pipes with membrane modules; chemical dosing with two dosing pumps; centrifugal pump (Lowara); various pipes, valves and measurement technology; switch cabinet with touch panel

Condition: used, Year of construction: 2007, Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpressurised 500 l permeate tank has an adjustable level control. For treatment with ozone, the water in the permeate tank is circulated via an adjustable ozone feed point. The ozone is generated from air in the ozone generation system by means of a silent electrical discharge and is available as an ozone-air mixture. The air and the undissolved ozone rise upwards in the permeate tank and are discharged via the residual ozone destroyer. A redox potential and ozone measurement is carried out after the centrifugal pump for monitoring purposes. The ozone dosage is set via the touch panel. You can choose between regulation via the redox potential or the ozone concentration. Additional title: Water softening, reverse osmosis system, ozone sterilisation Permeate output: 600 l/h Concentrate output: 200 l/h Hodpfx Aow Uvdgohgot Ozone output: 5 g/h Max. working pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5,5 - 6,5 bar (max. 10 bar); max. 0,37 Nm³/h Operation / Control: Simatic S7-300, Touch Panel Position: free standing Base construction: Fully mounted on tubular frame with spherical feet Features: Reverse osmosis unit, reaction tank complete with residual ozone destroyer, ozone generator, ozone gas warning device, ozone and redox sensor, switch cabinets with control unit

Year of construction: 2015, condition: used, Waste water neutralisation Hodpjxbqr Dsfx Ahgjt Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: new, Year of construction: 2019, operating hours: 0 h, machine/vehicle number: 20928, Burkhalter water treatment plant (state of the art, Swiss top quality) Hedpop Hf Idsfx Ahgot - Brand new (the unit has never been installed) - Please consult the attached PDF catalog: There you will find a detailed description of the plant as well as an extensive photo gallery (starting on page 8).

Condition: used, Year of construction: 2010, functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Hjdpfx Ahsv N U Ezsget Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit Hodpjxgua Ajfx Ahgjt 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) Hjdpoxgumcjfx Ahgjt - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), Item: D-10800-BacTerminator Hjdpfxoh Dxqvs Ahgot BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Nice condition

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. Hjdjx Da Tiopfx Ahgot For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, warranty duration: 24 months, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 12-Week Delivery ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ Hjdpfofggcwsx Ahgot ✅The Multi-Treat spray pretreatment machine is used for the surface treatment of materials to be painted. It offers the possibility of processing up to 8 different chemicals in tanks with varying numbers, depending on the process. All tanks are made of 316 SS and are insulated. The number of tanks and the number of heated tanks are determined according to the process steps. ✅The heating in the tank is done via gas heat exchangers. The processes can be monitored, and the times and temperatures of all processes can be set via the PLC touchscreen. ✅Any errors that occur in the system can be observed on the control panel. Automatic floats are located in the tanks; the system automatically stops if there is not enough water or chemicals in the tanks, and the liquid level is automatically replenished by transferring liquid between the tanks, ensuring the system remains safe. ✅There is a drain basin under all tanks. The drain basin is made of 316 SS. The tanks are made of 2 mm stainless steel 316. The material undergoes penetration testing and is argon-welded and sealed. The grates in the tank prevent dirt from entering the pumps. The interior of the cabinet consists of sandwich panels made of stainless steel 304, and the exterior is made of powder-coated sheet metal. ✅The panel thickness is 80 mm. It consists of stainless steel panels filled with polyurethane. PPT ring pipes and nozzles offer a long service life. ✅Thanks to the steam extraction fan, steam diffusion from the system into the work area is prevented. The washing system doors are container-like and sealed with silicone seals. The movable washing platform in the cabinet moves back and forth through the cabinet to wash the materials. The hoses are supported by the mobile carrier system. There are separate pumps for each process and a drain pump for draining liquids from the tanks. The drain pump is connected to the chemical drain tank. ✅There are manual application guns for manual application for each process. The system has a manual mode for pretreatment. The drain time and process time can be set via the PLC control panel. The drain time applies to manual application.

Condition: used, This listing is for the Millipore Elix Essential 10 UV Water Purification System The unit is in full working condition and is ready for immediate use Here’s a clear overview of the Milli‑Q Elix Essential 10 UV Water Purification System, a laboratory-grade water purification unit used to produce high-quality pure water Preparing reagents, buffers, and solutions Feeding instruments like autoclaves, washers, and ultrapure water systems General chemical or biological lab work requiring reliable Type 2 water quality Hodpfx Ahjy Iwzzjgjt

Condition: new, Mobile Cleaning Centrifuge ZS21-M EUR – Efficient Process Water Treatment | Made in Germany The ZS21-M EUR from Eurotec Innovation is the ideal solution for economical and sustainable solid-liquid separation in industrial applications. Thanks to its mobile design and plug-and-play system, this unit (new machine) is ready for immediate use and can be flexibly deployed in a wide range of production environments. Perfect for companies looking to reduce operating costs while optimizing their processes. Numerous additional variants and custom designs available on request. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Applications: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, etc. ⚙️ Technical Data: Cleaning capacity: up to 30 liters/min Speed: approx. 4,160 rpm Centrifugal force: up to 2,070 g Drive power: 1.5 kW Dirty water tank: approx. 99 liters Clean water tank: approx. 93 liters Voltage: 380 V / CEE 16A Your Benefits at a Glance ✔ Maximum mobility thanks to integrated trolley ✔ Compact design – flexible use in any production environment ✔ Extremely high separation performance due to >2000 g centrifugal force ✔ Significant cost savings through a closed water circulation system ✔ Reduced use of chemicals (e.g. compounds) ✔ Plug & Play – ready for operation within minutes ✔ Designed for continuous operation – high availability ✔ Environmentally friendly solution through resource conservation 🏭 Typical Applications: Vibratory finishing / tumbling Metal processing & metalworking fluids Wet blasting systems Washing, coating & phosphating processes Cleaning of emulsions & suspensions General industrial liquids Equipment: Dirty water buffer tank with agitator Double diaphragm compressed air pump PLC control system & automated operation Modular expandable & customizable From development to production, we supply all products from a single source – all “Made in Germany.” Hodpfx Ahsf Sqfqjgjt ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal along with legal notice details, before any purchase/contract conclusion is made.

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Hjdpfer Ezdrsx Ahgjt Water connections reduced to 1/2".