Used Heuft One: Metal Detector Beverage Production Machine for sale (76,087)

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill Kdjdjxb Uz Aopfx Abfen • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Goodnature Inc. juicer. The juicer shreds vegetables, fruit and root vegetables and hydraulically presses them into juice (cold-pressed juice) without heating. Suitable for continuous use (professional kitchens, smoothie bars, etc.) without risk of overheating. Model - Mini X-1. Kdjdpfxswd Umts Abfsn Year – 2019. Size of the squeezing batch 1,3-1,5 litres. Electrical requirements - Operates on mains power 230V. Condition – Excellent, almost as new. The juicer was used occasionally between 2019 and 2021.

Condition: excellent (used), COMPLETE TETRA PAK LINE MODEL TBA9 200ml SLIM FILLER TBA9/200S, V120, YOM 1993, 52.000 RUNNING HOURS TSA 36 STRAW APPLICATOR U-form TETRA PACKER TCBP 50-030 WRAP AROUND Kedpfx Abevvn Aysfedn TETRA MULTISHRINK TMS 63-050V, packing 2X3 CONVEYORS SYSTEM THE LINE IS STILL IN PRODUCTION

Condition: used, - Flat bottom tank with 2% slope Ksdpfx Abow Ngqtsfsdn - Brand : ALFA LAVAL - Total capacity : 30200 liters - Material : 316 L stainless steel - Interior finish : Cold rolled - Exterior finish : Cold rolled - Temperature controlled ROOF - Conical - 1 off-center chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor BOTTOM - 2% sloped plate with drain - 1 total drain valve with plug DIMENSIONS - Diameter : 2800 mm - Total height : 6000 mm - Ferrule height : 4800 mm - Conical upper dome : 500 mm - Chimney : 300 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. Kdodpstrv E Ujfx Abfon The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle.

Condition: like new (used), Year of construction: 2021, operating hours: 2,183 h, functionality: fully functional, machine/vehicle number: SR25-055032021, total height: 2,295 mm, total width: 1,510 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 400 V, year of last overhaul: 2024, control voltage: 400 V, operating temperature: 250 °C, input frequency: 50 Hz, space requirement height: 4,000 mm, space requirement width: 2,000 mm, Equipment: documentation/manual, Professional 25 kg Industrial Coffee Roaster SR25 in Excellent Condition. The machine was used lightly in a specialty coffee roasting facility. It has been regularly maintained and operated only by trained personnel. Total production approx. 1,200 kg/month the first year, used only occasionally thereafter. The equipment is no longer in use due to a change in business focus and is available for immediate delivery. Key Features: - 25 kg batch capacity - Precise temperature control - Consistent roasting quality - Quiet and efficient operation Industrial Specialty Coffee Roaster Coffed SR25 (2021) in like-new condition, only ~2,200 operating hours in total. The machine’s condition is like new, with no technical issues, always operated by trained staff. The business is still operational but has switched to larger machines. The roaster has been decommissioned and is stored in a container, so on-site testing is not possible. However, a live video demonstration of the machine is available. Technical condition: - ~2,200 total operating hours - Excellent mechanical and cosmetic condition – looks and runs like new - No faults, no repairs, no defects - Regularly cleaned and maintained - Indoor commercial setup Included equipment: - Coffed SR25 roaster (25 kg batch) - Green coffee loader - Destoner system - Cyclone - Coffed afterburner - Control panel - Tools and accessories Full photo and video package available on request Live online demonstration Logistics: Location: Soeborg, Denmark Kjdpsxvxq Rjfx Abfodn Deinstallation support: Yes Assistance with loading and transport: No

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 91160677-0-001, Pasteurizer in excellent condition, worked in a winery Kdjdjvq Snispfx Abfon

Condition: excellent (used), functionality: fully functional, The Tetra Pak Aseptic Filler A3 FLEX is a high-performance machine designed for filling liquids into 500 ml brik cartons, especially for dairy, juice, beverage, sauce, and concentrate applications. This model offers a combination of reliability, energy efficiency, and production flexibility. Outstanding technical specifications: - Production capacity: up to 6,000 containers per hour (bph) in the 500 ml format. - Intuitive operator interface: Tetra Pak touch panel. Output may vary depending on the format. Ksdpow Hf Efjfx Abfsdn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Date of manufacture - 2019. Speed - up to 500 bottles per hour. Kdjdpsulpu Sjfx Abfjn Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Serial number - 528. Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point. Kodpfxjulpmzj Abfsdn

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 03/1827/93, power: 7.5 kW (10.20 HP), Unscrewer for 2 modular crates AfG 20 x 0.5. The machine can also be used as a decapper (accessory required). Includes roller conveyor and complete documentation. The machine can be inspected on site. Price ex location. Kdsdpfx Asyaywnebfjn

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, total height: 2,600 mm, total width: 2,500 mm, total length: 8,000 mm, overall weight: 3,000 kg, machine base height: 100 mm, operating pressure: 4 bar, control cabinet height: 2,000 mm, temperature: 120 °C, compressed air connection: 8 bar, control voltage: 12 V, operating temperature: 20 °C, water tank capacity: 100 l, sheet thickness aluminum (max.): 3 mm, air demand: 3 m³/h, Bottling machine for bottles (0.5l and 0.25l) The bottles are fed to the machine via a conveyor belt and washed. Kedpfx Aex Sawtebfodn Afterwards, the filling process takes place, followed by sealing with a twist-off cap. The filled and sealed bottles are then transported out of the machine on a conveyor belt and can be packaged. All machine functions are fully operational. The bottling machine is as good as new but not suitable for our application. The machine was manufactured in China, with the control system supplied by Siemens. The machine is assembled and available for inspection. A demonstration of the process can be arranged. Appointment required!

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Kdedpfxer I Ddkj Abfon Purchased brand new in 2023 but never used.

Condition: excellent (used), functionality: fully functional, 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Model - SF 12. Date of manufacture - 1961 (has been refurbished since). Ksdpfjx A A I Hjx Abfedn Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Condition: excellent (used), functionality: fully functional, The Tetra Pak Aseptic Filler TBA/8 is a high-performance machine designed for filling liquids into 390 ml brik cartons, especially suitable for dairy, juice, beverage, sauce, and concentrate applications. This model combines reliability, energy efficiency, and production flexibility. Outstanding technical specifications: - Production capacity: up to 6,000 containers per hour (bph) in the 390 ml format. - Filling system: Aseptic technology with electronic pre-expulsion valve and automatic level control. Actual production may vary depending on format. Kdjdpfxew Hf Awj Abfen

Condition: new, Year of construction: 2025, Gravel and aggregate production equipment is used to crush, screen, and process stones, rocks, and other materials for the construction industry. This equipment is essential in producing various types of aggregates, including crushed stone, gravel, sand, and recycled concrete, which are used in the construction of roads, buildings, bridges, and other infrastructure projects. Here are some common types of equipment used in gravel and aggregate production: Kdedpfx Abjq Nxz Djfen 1. Jaw Crusher: - Jaw crushers are primary crushers used to break down large rocks into smaller, more manageable pieces. They are essential for the initial stage of aggregate production. 2. Impact Crusher: - Impact crushers are used to crush rocks and stones with the help of impact force. They are suitable for shaping and producing fine aggregates. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They produce well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They are suitable for processing materials with high abrasiveness. 5. Screens: - Vibrating screens are used to separate different sizes of aggregates. They classify the material based on particle size and ensure that the final products meet specified gradation requirements. 6. Scalping Screens: - Scalping screens are used to remove oversized materials before they reach the primary crusher. This helps to optimize the crushing process and prevent damage to the equipment. 7. Washing Equipment: - Washing equipment, such as sand screws or log washers, is used to remove impurities and fine particles from aggregates. This is particularly important for producing high-quality concrete sand. 8. Conveyors: - Conveyors are used to transport materials between different stages of the crushing and screening process. They play a crucial role in enhancing efficiency in material handling. 9. Stackers and Reclaimers: - Stackers are used to create stockpiles of processed aggregates, while reclaimers are used to retrieve the material from the stockpile. Both are essential for efficient material storage and handling. 10. Crushing Plants: - Complete crushing plants include various types of crushers, screens, and conveyors integrated into a single system. These plants are designed to handle large volumes of material efficiently.

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. Kdsdpfx Ajrklxvsbfsn We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Kedpfx Ajuzv Tzebfjdn Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Kedpfotp H Erex Abfodn Rolling speed (m/min) 10-15

Condition: ready for operation (used), Fortress Phantom Metal Detector With alarm and stop reject Standard Detection for ferrous and non ferrous Head aperture height 125 mm Head aperture width 350 mm Overall length 150 cm In excellent condition Kedpey N Sthjfx Abfodn Ready to deliver With machine manual

Year of construction: 2022, operating hours: 8,755 h, condition: used, functionality: fully functional, machine/vehicle number: MPR00044, We are offering this used One Click Metal MPRINT+ One Click Metal OCM metal 3D printer, year 2022. Current list price is €175,000, including 2 build cassettes (1 heated up to 250°C). The machine is still operational and is being sold because we have purchased a larger build volume system. Asking price: €85,000. Model: MPRINT+ and MPURE Serial number: MPR00044 Year of manufacture: 10/2022 Supply voltage: 230 VAC 50/60 Hz Fuse: 16 A Kdedpfx Aey N Dzwsbfjn Weight: 440 kg If you have any questions or require more information, feel free to contact us.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm Kodpfx Aexdmgvjbfsdn We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Kdjdjw A Iiljpfx Abfsn Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Kodewz Ukyjpfx Abfedn Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min Kdjdpfxjv Ng E Ts Abfjn ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery