Used Herding Delta Comp 1500-5/9 Sb for sale (73,304)

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Gujdpfxsxphqto Afreh Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: ready for operation (used), Year of construction: 1979, operating hours: 130,000 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, table width: 1,250 mm, table length: 1,600 mm, table load: 6,000 kg, spindle speed (max.): 1,250 rpm, number of axes: 5, This 5-axis WOTAN Rapid 2R/6-1500/2 was manufactured in 1979 and rebuilt in 2015. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 1,250 x 1,600 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality machining capabilities, consider the WOTAN Rapid 2R/6-1500/2 horizontal machining centre we have for sale. Contact us for further details. - W-Axis Travel: 1,000 mm- Rapid Traverse: 5,000 mm/min- Feed Range: 1-2,000 mm/min- B-Axis Rotation: 360°- B-Axis Rapid Speed: 3 rpm- Spindle Speed Range: 3.2 - 1,250 rpm- Main Drive Power (100% duty cycle): 45 kW- Number of Speed Steps: 49- Spindle Diameter: 130 mm- Connected Load: 76 kVA- Type of Current and Frequency: 3~ 50 Hz- Operating Voltage: 400 V- Control Voltage: DC 24 V- Rated Current of Equipment: 110 A- Rated Current of Allowed Fuse: 180 A (delay-action)- Wiring Diagram: E - 10957- Typical Workpiece Materials: Gray cast iron, cast steel- Typical Workpiece Components: Housings, planet carriers Guodsz N E Nljpfx Afrsh Technical Specification Taper Size SK 50

Condition: excellent (used), We offer a climatic test chamber from Weiss with Feucht! The climatic test chamber was only serviced by Weiss / Vötsch in December 2020 and was still in use until December. 2021 the test sticker! All tests were carried out, another test run was carried out in our house, the humidity and temperature were checked with calibrated test equipment. The climatic test chamber has been serviced once a year and is in perfect condition! The logbook is attached WHITE 1500SB / 010JU / 40DU Temperature range -40 ° C - + 180 ° C Humidity / climate: 15%-95% / 10°C - 95°C Test space: 1500 liters Inner dimensions: 1490 mm deep, 1100 mm wide, 945 mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Gsdpfxjg Dcfzo Afrsuh Refrigerant: R404a 2.00kg The cabinet has no feet and is stable on a frame If you have further questions, you can contact us at any time

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,235 h, Internal combustion forklift Machine brand: DOOSAN Model: D90S-5 Year of manufacture: 2012 Hour meter reading: 8235 Own weight (kg): 12197 Gujdjz E S Eqepfx Afrsh Load capacity (kg): 9000 Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel Recently underwent a major technical inspection at 8060 operating hours. - new tires - new forks - cylinder regeneration - transmission: discs + seals - brakes: discs and bearings - all oils, fluids, and filters Technical condition: used, good

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Gedpfx Afozu N Ukorjuh Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. In good condition.

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) Godoz H Uhqspfx Afrsuh - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm Guodpocbtwdjfx Afroh -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm -with: detachable stop -Weight: 2600 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system Gedoz Rmanspfx Afreuh + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 615, overall weight: 8,700 kg, The Mori Seiki SL-303 BMC/1500 is a robust, high-precision 3-axis CNC inclined-bed turning and milling center. The model designation indicates a system with driven tools (BMC), C-axis, milling function (MC), and an extended distance between centers of 1500 mm for machining long workpieces (e.g., shafts). Equipment: -Single spindle, three-jaw chuck, automatic tailstock SMW Autoblock, 12-tool turret, automatic steady rest, chip conveyor Control: -MSG-501 (SL303-615) Key Features & Advantages: -Complete machining (Multi-Process): By using driven tools and C-axis control, milling, drilling, and threading operations can be performed directly after turning without re-clamping. -High rigidity: The massive cast iron inclined bed effectively dampens vibrations, which contributes to excellent surface finishes and a long tool life. Gedjz N Dkbepfx Afrjuh -Thermal stability: Comprehensive cooling and oil circuits around the spindle minimize thermal expansion during long and heavy roughing operations. Accessories: -Workbench with partition (1 door, 3 drawers), containing: hand tools -Telescopic drawer cabinet (7 drawers), side shelf, containing: various turning tools and tool holders

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm Gusdpfxsiqhgqo Afreh -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Condition: used, axle configuration: 3 axles, first registration: 06/2016, suspension: air, tire size: 385/65/r22,5, wheelbase: 1,400 mm, Year of construction: 2016, General information Applicable material: Grain Drivetrain Drive: Wheel Axle configuration Tyre size: 385/65/r22,5 Suspension: air suspension Rear axle 1: Steering Weights Empty weight: 9.250 kg Carrying capacity: 29.750 kg GVW: 39.000 kg Functional Make of bodywork: OVA Number of compartments: 9 Guodpoyv Hnaefx Afroh

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Guedpfez Iubtjx Afroh Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: ready for operation (used), Festo 556815 / EGC-120-1500-TB-KF-0H-GK-1HL-PN toothed belt axis, SN: 3S7PLVZ1S90 – stroke: 1500 mm, used, in good condition, 100% fully functional, delivery as shown in the photos. Gedpfex Erk Eex Afrouh

Condition: excellent (used), Year of construction: 1997, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Welfit Oddy ISO 20FT Tank Container 23,820L / 1-Compartment UN PORTABLE T11 Bottom discharge Steam heating 5-Year + CSC inspection valid until 09-2028 = Further Information = General Information Year of manufacture: May 1997 Model year: 1997 Suitable materials: Chemicals, construction water, fuel, waste water, and sewage Weights Tare weight: 3,820 kg Payload: 24,930 kg Gross vehicle weight: 36,000 kg Functional Interior capacity: 24,690 l Body manufacturer: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Gusdpfx Aszap R Refroh Further Information Please contact Arne Honingh for further details.

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table Gusdpsxz Aa Tefx Afrjh -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: 1500/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 235 mm -Transport dimensions: 1500/950/H1120 mm -Weight: 139 kg

Condition: ready for operation (used), functionality: fully functional, Delta TTA 550 pallet block cutter Operating Gjdpjzkt R Ujfx Afrsuh

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, controller manufacturer: FANUC, controller model: Series Oi-TD, number of axes: 5, This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine. • Number of spindles: 2 Gsdpfsx Sz A Dex Afrouh • Main spindle: • Max. bar diameter: 20 mm • Max. machinable length: 170 mm • Driven guide bush • Counter spindle: • Max. bar diameter: 20 mm • Spindle speed: 10,000 rpm • Spindle drive power: 2.2 kW Additional equipment • Barfeed magazine: Robobar

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Gedjip D Rhspfx Afrjuh

Condition: used, Year of construction: 1998, pallet roller conveyor 1500-1040-900 RA2441 Pallet roller conveyor segment, continuous design length: 1500 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Gedpfx Afox Dfl Dorouh Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: reconditioned (used), functionality: fully functional, operation weight: 200 kg, Year of construction: 2022, Equipment: hydraulics, EPIROC SB 202 hydraulic breaker overhauled With Lehnhoff MS03 mounting plate Hydraulic hoses with couplings and 1x point chisel Gjdpfx Afettv Sxorouh Operating weight 200 kg Oil flow 35 l/min - 65 l/min Operating pressure 100 bar - 150 bar Impact frequency 850 - 1800 impacts/min Diameter of insertion tool 65 mm Working length of the tool 300 mm Carrier weight class 2.5 t - 6 t Hydraulic input power, max. 17 kW Guaranteed sound power level 118 dB

Condition: good (used), clear span: 1,900 mm, Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Delta The scope of delivery includes: 01x pallet racking beam, used Material color: yellow U-profile: approx. 80 x 50 x 3.2 mm Agraffe: 3 HK (hooks) Clear width: 1,900 mm 02x safety pins, used Gedpfx Afsqctqzjrjuh Material color: sendzimir galvanized To secure the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. Gusdpfx Afezx Tgrjrjh If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Godpfx Afoz Ip E Herouh Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 226,853 km, power: 96 kW (130.52 HP), first registration: 06/2014, fuel type: diesel, tire size: 215/65R15C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, suspension: steel, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and accessories = - CD player - Spare wheel - Speed limiter - Stability control = Additional information = Tire size: 215/65R15C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Rear axle: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Unladen weight: 1,975 kg Payload: 1,025 kg GVWR: 3,000 kg Gsdpjzxl T Refx Afrsuh Damage: None

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. Guedpfx Afozlzv Isrsh The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148