Used Herbold Smf 30/30-F9-6 for sale (65,370)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Lasdpfx Aney Rnrijuec Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Laodpfxjy Rnqfj Anuoc Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Ljdpfx Asyr Tv Ujnuoac Rotor width: 600 mm Rotor knives: 7 Stator knives: 3 Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: used, machine/vehicle number: 12866, Rotor diameter: 450 mm Rotor width: 600 mm Laodpsyr Tvuefx Anujc Rotor blades: 4 Stator blades: 2 Inlet cross-section approx. 450 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13064, Rotor diameter: 450 mm Rotor width: 600 mm Number of rotor knife rows: 5 Laodeyr Tt Tjpfx Anuec Number of stator knife rows: 2 Feed opening approx. 600×600 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows of stator knives Infeed opening approx. 780 x 1490 mm Laedpfx Aoyr Tp Uonusc Drive motor: 132 kW

Condition: used, machine/vehicle number: 12598, Rotor diameter: 600 mm Rotor width: 1450 mm 7-knife rotor 3 rows of stator knives Ljdpfxsyr Tpzs Anueac Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 14083, Rotor diameter: 600 mm Rotor width: 1450 mm Rotor knives: 5 rows Ledpfx Aoyyd Swenuoac Stator knives: 2 rows Infeed cross-section approx. 1450 x 700 mm Drive motor: 75 kW

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Lsdpfx Anjw R Un Asuoac Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation Lsdeyy Tuuspfx Anujac - Radio reception: AM/FM - 3x USB ports - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - 3x USB ports - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long Ledjywfxyjpfx Anuoac - Fuel tank, standard ground clearance - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Condition: ready for operation (used), Beautiful granulator with good rotor motor is tested before billing Lajdpfx Aenxk Rzenuoc

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Lodpfx Aoubyyvenujac

Condition: like new (used), “Herbold 600/1000 – Granulator / Shredder” for Sale Also many other manufacturers like: Pallmann / Lindner. Find our complete stock on our website. Lasdeggfkbepfx Anusc Manufacturer: Herbold Type: 600/1000 Electrical Motor: 55 kW Included

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel Ljdpfxsh Rwc Ej Anuoac - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Condition: as good as new (ex-display), Hammer mill Manufacturer: NEUE HERBOLD Type HM 450 / 300 Drive: 18.5 kW - show room machine - crushing of brittle plastics such as electronic scrap, wood scrap, and organic insulation material. Ledpfx Aobxadnsnueac

Condition: good (used), Year of construction: 2009, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as Lsdpfx Aji E S Sqjnueac - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm, Laedpfx Aeh Igygonuoc Rotor length: approx. 600 mm, Rotor diameter: approx. 450 mm, Heavy-duty design, Closed solid rotor, 3 rows of rotor blades (9 pieces), new 2 rows of stator blades (4 pieces), new with wear protection (Hardox), new, Screen basket + 1 screen, new, with control cabinet, approx. 6 m cable, newly wired, Housing temperature monitoring Hydraulic unit, Shredder, ideal for shredding solid parts, Testing / demonstration possible by appointment.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Lodezdrzxopfx Anueac Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs Lsdpfx Anjzgbmijujac The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location Ljdozf N Edspfx Anujac - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: excellent (used), CATALOGUE NUMBER 7928 TECHNICAL DATA - Max. workpiece height: 120 mm - Max. workpiece width: 1900 mm Ledsyu Tmlopfx Anusac - Top unit with 6 brushes - Unit adjustable up/down - Oscillating unit - Rotating star-shaped sanding unit arrangement - Infinitely adjustable brush speed via inverter - Infinitely adjustable feed, rotation, and oscillation speeds - Main motor: 7.5 kW - Vacuum table - Two vacuum pumps: 2×7.5 kW - Pump dimensions: 1100x800x940 mm - Extraction port diameter: 4x150 mm, 4x200 mm - Overall machine dimensions (L/W/H): 2850x2100x2400 mm - Weight approx. 2500 kg ADVANTAGES – Two vacuum pumps – With oscillation – Rotating aggregate – German-made – Unpainted – Original DTR documentation – Used sander, very good condition Net price: 45,900 PLN Net price: 10,900 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, functionality: unexamined, machine/vehicle number: 516305Y00733, Year of construction: 2021, operating hours: 1,354 h, load capacity: 3,000 kg, This STILL electric forklift truck, 3 tons capacity – Model: RX 60-30 – Year of manufacture: 2021 (with rotating clamp fork, type: Kaup 3T 491 – Year of manufacture: 2021) will be auctioned off, including the charger, in our online auction “STILL electric reach trucks and forklifts”. You will find this item and many other items from the fields of warehouse logistics, workshop equipment, and production technology on our RESTLOS auction platform. Lodpfozfhrisx Anueac Year of manufacture: 2021 Operating hours: 1354 hours Includes battery charger Includes rotating clamp fork (mounted) Keys available As shown in the picture Without any other items or positions shown in the picture Functionality not tested

Condition: new, Faulhaber 3557K024C micromotor 30 / 1S 134:1 010678, unused, 100% functional, scope of delivery as shown in the photos. Laedpfx Anjzffixjuoc

Condition: ready for operation (used), Year of construction: 2015, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details. • 4 units available Lodpfxszd Tgpj Anusac • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg • With teach panel, KR C4 control unit, cable set (optional)