Used Hau Rotary Indexing Machine for sale (66,557)

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Feed of the drilling units: mechanical feed via quill Ijdpfewyn S Usx Afkoth Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table Itjdpow H I R Rofx Afksh • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: good (used), There are 3 rotary table surface grinding machines from SIELEMANN: 1x Magnet size 1000 mm with rotary table, the machine is equipped with only an internal grinding head, Type: RB 100 Itjdpoy Ehikefx Afksh 1x Magnet size 600 mm with rotary magnetic table, the machine is equipped with 3 grinding heads: internal grinding head, surface grinding head, and face grinding head, Type: RFSBR 60 1x Magnet size 500 mm with rotary magnetic table, the machine is equipped with 3 grinding heads: internal grinding head, face grinding head, disc grinding head All 3 machines come with extensive accessories, totaling 14 Euro pallets.

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Ijdpfxowdfyqj Afketh Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Condition: ready for operation (used), Grinding rotary table machine SIELEMANN RF-PE with digital control. Iedpsyzymmefx Afketh

Year of construction: 1964, condition: used, -WKG 429- Offered here is a grinding machine from the company Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm grinding wheels Ø: shrink head 475/254 Itjdpfx Afjg Nt Dbsksh Grinding wheels Ø: finishing head 457/357 Weight: 8t Grinding method: segmental grinding Segment grinding heads: 2 pieces Accessories: Dressing device Water box with paper belt filter Marposs control

Condition: ready for operation (used), Year of construction: 2015, Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. Both machines are specifically designed for the production of rotationally symmetrical components. Documentation available. An on-site inspection is possible. Individual sale possible. Itodpeyyplvofx Afksh

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Itjdoyx Ia Njpfx Afkeh Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system Itsdpfx Aoyxnl Sefkjh - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Condition: good (used), Size max: 430 x 300 mm Book thickness: max 60 mm Speed max: 6000 c/h Height: 1400 mm Width: 1600 mm Itodpfx Afed Tnh Eoksh Depth: 900 mm Weight: 560 kg (approx.)

Condition: ready for operation (used), Year of construction: 2008, Technical informations Format Range Maximum Format: 320 x 250 mm (12.6 x 9.8 inches) Minimum Format: 130 x 90 mm (5.1 x 3.5 inches) Optional: Can be configured for formats down to approximately 100 x 75 mm (3.9 x 3 inches). Book Thickness: Maximum 25 mm (0.98 inches) (depending on product specifications). Cut Forms: Angular Cut (straight index tabs) Form Cut (various shapes) Corner Rounding (optional) Corner Perforation (optional) Index Types: European/Arabic index Combined indexes Double and multiple indexes Register Cutting Depth: 25 mm (0.98 inches) Punching Axes: 1 axis (fully automatic process) Printing Capabilities: Index printing with 1 or 2 colors. Print Content: Letters and words on both printed Itodpfx Aex Rw Imofkeh and non-printed indexes. Performance Output: Maximum 1,500 pieces per hour (output can vary from 100 to 1,500 pcs/hour depending on product complexity and setup). Physical Specifications Dimensions (L x W x H): Approximately 3,900 x 2,700 x 2,000 mm (153.5 x 106.3 x 78.7 inches) Weight: Approximately 2,300 kg (5,070 lbs)

Year of construction: 1976, condition: ready for operation (used), A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible. Itodpeyvuu Isfx Afkeh

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Prices on request All dimensions are non-binding; if you require exact measurements, please inquire. Ijdjyvqc Iepfx Afksth

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Itedodzp U Iopfx Afksh Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Itjdpfor I E Itjx Afkeh Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 Itodpfx Aogp T D Nsfkjh - 4x T-slot Weight approx. 120 kg

Year of construction: 2002, condition: used, Balpe SAS model: 9PL/20 serial: 88 Itsdpfxob Uanqj Afkoh Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Itedpfx Aoykzhvjfkoh -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm Iodpfxskv Uq Ij Afkoth The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Itedpfx Ajkwb Disfkoh For further information or contact options, please visit our website

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Itsdoyt N Dkepfx Afksh

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Itedpfxeu Ivc Nj Afkoh

Year of construction: 2025, operating hours: 100 h, condition: like new (used), functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine, purpose-built for the automatic filling and packaging of a wide array of products, ranging from fine powders to granular or chunky materials such as nuts, legumes, rice, seeds, or snacks. It merges high precision with intuitive operation, ensuring optimal production efficiency—an ideal solution for small, medium, and large-scale operations across the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging Solution: Automated workflow from pouch feeding, opening, filling, and sealing to date coding—delivering uninterrupted and highly efficient production processes. Versatile Applications: Suitable for a comprehensive range of products: - Powders: e.g., flour, spices, protein powder - Granular products: e.g., lentils, beans, rice, nuts, snacks, seeds - Granulates or blends Compatible with Pre-Made Bags: Handles high-quality pre-formed pouches made of multilayer laminated film or paper—with or without zipper. Precise Dosing: Features an integrated auger filler or optional volumetric dosing for precise filling by weight—with an accuracy of ±0.3–1.5%. Intuitive Control: Equipped with a modern SIEMENS touch screen for complete management of all parameters via a user-friendly interface. Hygienic Stainless Steel Construction: All product-contacting components are made from 304 or 316 stainless steel, are compliant with international hygiene standards, and are designed for easy cleaning. Safety & Efficiency: Automatic error detection prevents sealing defects or product loss. Integrated alarms for air pressure, overload, and pouch handling ensure maximum operational safety. 🔩 Technical Specifications Parameter Value Model HMD-G200 Packaging speed 5 – 55 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-formed pouch, with or without zipper Power 2.1 kW Power supply AC 380 V ±10%, 3-phase, 60 Hz Air pressure 5 – 8 kg/cm², Air consumption 0.4 m³/min Noise level ≤ 80 dB Bag opening Vacuum system Additional features Date coding, nitrogen flushing, vibration, air evacuation 🧠 Key Components from Industry-Leading Brands Component Brand Touch screen & Control SIEMENS Frequency inverter Bosch Rexroth Temperature controllers & Relays OMRON Pneumatics & Valves AIRTAC / Festo Vacuum pump ORION 🚀 Included in Scope of Delivery - Auger filler for powders and fine granular products - Stainless steel screw conveyor for automated product feeding - Integrated date coder - Horizontal conveyor belt for finished pouch discharge 💡 Your Key Advantages ✅ Reduce labor costs through full automation ✅ High throughput with consistent, repeatable quality ✅ Flexible configuration for powders, nuts, pulses, and blends ✅ Hygienic, robust, and easy to maintain ✅ Simple, intuitive operation with intelligent Siemens controls Iodpfsxqccmjx Afketh

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Iedpfxjxcbpis Afketh Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Itsdpfx Afsxf Uudskjh Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition