Used Haco Ppm 30.200 for sale (258)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern Djdjyxhp Depfx Ab Tjkp - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Voltage: 380 V Dsdpfx Aeylv Nwsb Tokp EQUIPMENT Electrically adjustable back gauge Electrically adjustable cutting angle Electrically adjustable blade gap Electrically adjustable blade gap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 20345, sheet thickness (max.): 10 mm, working length: 4,000 mm, TECHNICAL DETAILS Dkodpoylv Itofx Ab Top Max. sheet thickness: 10 mm Working length: 4,000 mm MACHINE DETAILS Voltage: 380 V 50 Hz EQUIPMENT Electric backgauge

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Item No. 22564 Dkjdsin I Nbspfx Ab Tep Technical data: - Pressing force: 150 t - Working width: 2600 mm - Clearance between columns: 2100 mm - Table width: 180 mm - Overhang: 250 mm - Installation height: 325 mm - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3000 x H 2400 x D 1600 mm - Weight: approx. 7000 kg - Includes: - Two-hand control panel with foot pedal

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Dkodpsx A Tpnofx Ab Tep Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: used, Year of construction: 2002, sheet width 3000 mm plate thickness 6 mm distance between columns 3200 mm speed . m/min rear stop 1000 mm total power requirement 7,5 kW The backgauge is electric. The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to sale; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Dkodpfx Absyqwbrs Tep More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, machine/vehicle number: 81511, functionality: fully functional, overall weight: 25,000 kg, bending force (max.): 225 t, control type: CNC control, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Dsdpfsyml D Tex Ab Tjkp

Condition: used, Year of construction: 1983, pressure 180 t chamfer lenght 3050 mm distance between columns 2550 mm throat 250 mm stroke 150 mm return speed 65 mm/sec ajustment speed 50 mm/sec work height max. 1010 mm oil volume 150 l total power requirement 11 kW weight of the machine ca. 9500 kg dimensions 3100 x 1750 x 2850 mm Equipment: - Controlled axes: Y1, Y2, X - Electric rear stop, adjustable from the front * Fine adjustment via hand crank* Dkedpfx Aowa Dyzjb Tsp - 2 front support arms - Upper tool - Lower tool = die block - Rear + side safety device - Foot control

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Capaciteit: 3600 x 150 ton BC55 CNC-besturing Bouwjaar: 2000 CNC-bombering Dsdpewz I Avefx Ab Tokp Euro-gereedschapsklemming

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Dkjdpfxjvy H Iie Ab Tep Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, machine/vehicle number: 08880472, Width 510mm Table length 285cm Tree 4 sharpening irons Tree protector 5.5kw motor Voltage: 380V Djdpfx Aorr Hn Seb Tokp

Condition: used, functionality: unexamined, Equipment: CE marking, finger protection, safety light barrier, Innovative finger guarding system for pressbrakes utilizing following LASER optical safety light grids in front of the tool. Installation kit with documentation. Like new, partially sealed with protective film, very little use. Dodox Dq T Tjpfx Ab Tskp

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Dkjdpfx Aox Dr Dajb Tep Please request further details and photos. We can purchase your faulty press brake.

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Dkjdpfx Aex Dr U Eob Tep

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Dedpfxex Ed H Ao Ab Tskp

Condition: new, functionality: fully functional, New and used controllers for press brakes. For replace, spare parts and retrofitting. Cybelec Cybtouch8, Cybtouch 12, Modeva Pac 15 TP10S, E21 Estun, E22 etc. Other types on request. Dkodpfx Abjx Hkrwo Top We can buy your tired press brake for spare parts.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. Dsdpfx Aoxflfmob Tskp The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Year of construction: 1980, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 6mm. Dkedpemgcnlefx Ab Top

Year of construction: 1997, condition: ready for operation (used), A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible. Dsdpfxjwr Dwqs Ab Tjkp

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Haco press brake type OPTIFORM 3m x 150T Easybend CNC controller Dsdpexan Imjfx Ab Tokp Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Easybend 2DT, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPES 4m x 135T Easybend 2DT CNC control Motorized backgauge X-axis 2 pneumatic fingers Dkjdpfx Abexbnz Ao Top Manual quick-release clamping system for punch, European Standard type Table for die, European Standard type

Condition: used, Year of construction: 1998, machine/vehicle number: 40225, functionality: fully functional, bending force (max.): 225 t, control type: CNC control, actuation type: hydraulic, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Dkodpfx Absyhxtuj Tjp

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Dkodjri Skaepfx Ab Tep

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, controller model: ATL 595, working width: 3,100 mm, power: 19 kW (25.83 HP), bending force (max.): 200 t, distance between stands: 2,600 mm, Refurbished machine Haco press brake type PPH 3m x 200T Dkjdpfxjxanm Ao Ab Tep New ATL 595 controller Motorized back gauge X axis European Standard type punches Monoblock die

Condition: reconditioned (used), functionality: fully functional, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,000 mm, Refurbished machine Hydraulic guillotine shear HACO type PS 4m x 6mm New SP9 control Retractable backgauge, 1000mm travel New 4-edge blades, stainless steel quality Dksdpexaz Efsfx Ab Top