Used Haas Cnc Turn-Mill Center for sale (26,525)

Condition: excellent (used), Year of construction: 2012, Multicut 500i 5-axis turning center in very good condition. (X-, Z¹-, Z²-, C-, B-, Y-axis). The machine was installed in September 2014 and regularly maintained. It is a very powerful and highly precise machine. Spindle on: approx. 13,700 hours, spindle hours: 4,500 Main technical data: CNC Siemens 840D Swing diameter over bed: 1,030 mm Maximum turning diameter: 690 mm Turning length: 1,693 mm Y-axis: 370 mm Spindle bore: 106 mm Bar capacity through draw tube: 94 mm Spindle speed: 3,500 rpm Spindle motor S1/S6 40% duty cycle: 59/74 kW Milling spindle: 12,000 rpm Milling spindle power S6 40% duty cycle: 22 kW Podpfx Asy Evw Ashyepr Milling spindle mount: CAPTO C6 B-axis: -120º, +105º ATC magazine with 81 slots Linear scales in X, Z, Y Tailstock MK6, stroke 180 mm Machine dimensions (L x W x H): 5.4 x 3.86 x 3.76 m Machine weight: 22,800 kg Accessories: Forkart chuck type 3FNC with reversible hard jaws • Chip conveyor • Internal cooling through tool 60 bar • Cooling gun • Automatic tool measurement • Automatic door opening • Servo-controlled hydraulic steady rest type SMW SR 5.1 (85 to 350 mm diameter), automatic up/down movement

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min Podpfevu E R Sex Ahyjpr rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2008, operating hours: 50,669 h, functionality: fully functional, turning length: 2,110 mm, turning diameter over cross slide: 725 mm, turning diameter: 570 mm, spindle motor power: 30,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 132 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 2,200 mm, type of input current: three-phase, bar diameter (max.): 117 mm, quill diameter: 100 mm, swing diameter over bed slide: 780 mm, overall weight: 11,000 kg, Turning-milling center – HYUNDAI KIA SKT400LMC. The machine is working and under power. The machine is equipped with a high-class hydraulic steady rest with a range of Ø30–Ø245 mm, many jaws – around 90 sets, 10 of which are brand new. Tool holders for driven tools BMT75 – 2 radial and 2 axial, many holders for static tools. Two-speed gearbox, brand “BARUFFALDI”. Automatic door! The machine is very precise and stable. Specifications: Control FANUC 21i-T Swing 725mm Bar Capacity 117mm/132mm Chuck Size 320mm - Forkardt Maximum Cutting diameter 570mm Maximum Cutting Length 2110mm Milling Motor Power 7.5/5.5kW Milling RPM 4000rpm Tailstock Body Travel 2100mm Tailstock Quill Diameter 150mm Tailstock Quill Stroke 150mm Tailstock Taper MT #5 - BUILD IN Turret Positions 12 Station Rapid Feedrates 20m/minute Spindle Motor Power 37/30kW Spindle Nose A2-11 Spindle Speed 2000rpm Tool Size 32 x 32mm Tooling Configuration BMT 75 C axis 0.001 degree Ppsdpfxjy Equ Ts Ahysr X axis Travel 320mm Z axis Travel 2200mm Machine Dimensions 6340 x 2165 x 2228mm Machine Weight 11000kg

Condition: used, Year of construction: 2022, operating hours: 10,014 h, functionality: fully functional, machine/vehicle number: 00340000910, turning length: 1,290 mm, turning diameter: 640 mm, spindle motor power: 46,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 95 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, workpiece weight (max.): 1,200 kg, feed force X-axis: 9,500 N, feed force Z-axis: 15,500 N, Equipment: documentation/manual, Technical data in the attachment. Ppedpjy Emx Rjfx Ahyjr

Condition: good (used), Year of construction: 2012, Swing over bed 641mm, 229mm max. machining diameter, Pjdpfx Ahey Ax Ixoyepr 356mm cutting length, 6000rpm spindle, 44mm bar capacity, 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, C axis & Milling, HAAS control, 3 jaw chuck, coolant, swarf conveyor, Tool Setter,

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter • SMW collet chuck, axial draw – Hainbuch Spanntop system Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Ppsdpfxeyiayxs Ahyor Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 80 mm, travel distance Y-axis: 260 mm, • Fanuc 31i-B5 control • 15 inch LCD color screen • Y-axis 260 mm (+/- 130 mm) • B-axis swivel range 230° (+/- 115°) • Milling spindle drive power 15/22 kW • Milling spindle speed max. 12,000 rpm • Main spindle drive power 22/26 kW • Speed 4,000 rpm • Spindle nose A2-8 • Bar capacity main spindle 80 mm • Counter spindle drive power 15/22 kW • Speed 4,000 rpm • Spindle nose A2-8 • Direct position measuring systems X1, Y1, Z1-axis • 12-position turret • Milling spindle with B-axis • Y-axis • HOWA clamping cylinder and chuck (L) • HOWA clamping cylinder and chuck (R) • 2 C-axes incl. disc brake • M-function open/close chuck • Chuck foot switch • Coolant system with 4 pumps • Automatic central lubrication • Automatic machine shut-off • Hinge belt conveyor right side • LED work area lighting • 1 set machine documentation • CE specification FANUC 19" HMI Touch Panel iH Pro instead of the 15" standard screen HMI touch panel from Tool holder: Capto C6 Number of slots: 80 pieces Tool monitoring system Raku Raku 1. Tool management 2. Load monitoring 3. Compensation management 4. Operating information KITAGAWA power chuck 3-jaw BB210 • Passage 81 mm • Jaw stroke in diameter 8.8 mm • Base jaw toothing 1.5 mm x 60° • Speed max. 4,500 rpm KITAGAWA power chuck main spindle Hydraulic hollow clamping cylinder SS1881K • Passage 81 mm • Piston stroke 25 mm • Speed max. 4,800 rpm SMW power clamping device Hydraulic full stroke cylinder SIN-S 125 • Pressure max. 70 bar • Tensile force at 40 bar 41 kN • Speed max. 6,000 rpm Bar feeder interface incl. "Optional block skip" 3-color signal lamp Tool setter (manual) Ppjdpjwpkp Ijfx Ahyjr Integrated unloading device counter spindle • Diameter max. 80 mm • Length max. 200 mm • Weight max. 3 kg Automatic work area door Belt switch automatic work area door Transformer 120kVA TMX-4000ST Machining condition selecting function Kinematic setup procedure Kinematic adjustment FANUC via iHMI - Renishaw touch probe RMP600 - Macro software - Amplifier - C6 holder - Calibration sphere - Interface Gear skiving function 3D collision avoidance KNOLL KF300/1800 70 bar with throughflow cooler alpha 9-E - Clean water tank: 1,800 l capacity - 1 x low pressure pump: 150 l/min / 3.1 bar - 2 x medium pressure pump: 40 l/min / 7 bar - 1 x high pressure pump: 20 l/min / 70 bar - 1 x frequency converter high pressure pump - 1 x double switch filter - 1 x throughflow cooler alpha 9-E - 7 pressure stages KNOLL scraper belt conveyor 500 K-1 Conveying height 1,700 mm Discharge height above floor 1,150 mm

Condition: excellent (used), Year of construction: 1998, CNC Control: MSD-501II X-axis travel mm: 235 Z-axis travel mm: 495 Swing over bed mm: 680 Max. turning diameter mm: 390 Max. turning length mm: 485 Ppedpjy An Nxjfx Ahyjr Bar capacity mm: 86 Spindle speed rpm: 3,500 Spindle power kW: Spindle nose: A2-8 Chuck: Driven turret / Live tooling Turret stations: 10 Tailstock: Yes EQUIPMENT Driven turret Tailstock Self-centering chuck FANUC electrical cabinet Coolant system Manuals / electrical diagram

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Podpfjvlxf Dex Ahyjpr Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Main spindle 10” 4000 rpm Turret 12 stations Live tool speed 4500 rpm Spindle bore 91 mm X-axis: 215 mm Z-axis: 605 mm Machine dimensions: 2700 x 1690 x 1725 mm Weight: 4600 kg Pedpfx Ajylxbiohyepr Without chip conveyor

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ppjdpjyt Nvtjfx Ahyjr Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: used, Year of construction: 2007, CNC Turning and Milling Center Machine type: DMG CTX 210 V3 Control: Heidenhain CNC Pilot 4290 Year of manufacture: 2007 Available from: immediately / now TECHNICAL DATA: Max. turning length: 365 mm Turning diameter: 290 mm Max. swing diameter over bed: 380 mm C-axis Spindle speed range: 20 - 6,000 rpm Bar capacity: 56 mm Travel distances: X-axis: 160 mm Z-axis: 339 mm Number of turrets: 1 Tool holder: VDI 30 Tool stations: 12 Driven tools: 12 Tailstock Space requirements (LxWxH): 2.88 m x 1.72 m x 1.67 m Machine weight: 4,200 kg Ppedpfoy Ecuhjx Ahysr Features: Operating manual / instruction manual

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h Psdpfx Aoy Akpnshyspr EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Mayfran Consep 2000 chip conveyor SMW quick-change chuck

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, A used CNC turning and milling center Main and counter spindle C axis Podpfx Ahjy D Tz Noyepr Y axis Further technical data will be added.

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Ppodpfx Asy D Rypohyor Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, Year of construction: 1993, functionality: fully functional, Traub CNC lathe TNS26DG, TX8F, year of manufacture 1993 • 2x 12-station turrets with rotating tool drive VDI25 • C-axis on main/sub spindle • 163E on main spindle, 161E on sub spindle • Chip conveyor, bar feeder DN26 • Spare parts catalog, electrical diagram, ATC optics Ex site, directly from production By arrangement, approx. 2-3 weeks after order 100% payment before loading Without any warranty. Ex location/dismantled, as inspected and tested. Subject to prior sale. Pedpoy D I Svsfx Ahyspr

Condition: ready for operation (used), Year of construction: 2012, operating hours: 4,299 h, functionality: fully functional, machine/vehicle number: 15995726904, spindle motor power: 20 W, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Machine equipped with an integrated 4th axis by TSUDAKOMA. Ppjdpsy D I R Ejfx Ahyer

Condition: used, Year of construction: 2010, operating hours: 29,870 h, functionality: fully functional, machine/vehicle number: 8045000191A, DMG CTX 510 eco – CNC Universal Slant-Bed Lathe Manufacturer: DMG (Gildemeister / DMG MORI Group) Model: CTX 510 eco (Ecoline Series) Year of Manufacture: 2010 Control Unit: Siemens Overview The DMG CTX 510 eco is a robust and powerful universal CNC lathe designed for heavy-duty turning and precision machining. Featuring a high-torque spindle and a 45° slant-bed design for excellent chip flow and thermal stability, this machine is ideal for both small batches and production runs. Key Technical Specifications Max. Swing Diameter: 680 mm Max. Turning Diameter: 465 mm Max. Turning Length (Z-axis): 1,050 mm Spindle Speed: 3,250 RPM Main Spindle Power: 33 kW (40% DC) / 22 kW (100% DC) Spindle Torque: 630 Nm (High torque for heavy cutting) Bar Capacity: 76 mm Rapid Traverse (X/Z): 30 m/min Turret & Tooling Number of Tool Stations: 12-position turret Tool Holder Type: VDI 40 Driven Tools (C-Axis): Equipped with C-Axis and milling capability for 3-axis machining. Included Equipment & Features Steady Rest ,Tailstock,Chip Conveyor Coolant System: High-pressure pump and tank. Physical Dimensions Pjdpfoy D Il Aox Ahyjpr Weight: Approx. 7,800 kg Footprint: Approx. 4.5m x 2.4m x 2.0m Condition Well-maintained machine from a professional environment. Original DMG signature build from the FAMOT factory. Available for inspection

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,028 h, functionality: fully functional, machine/vehicle number: type 2016-CV6+3P-1T, workpiece weight (max.): 1,500 kg, CNC machine Milla Plus, Pretek Unico type 2016-CV6+3P-1T, year of manufacture 2019, 400V, 1500 kg, working area 205 x 165 cm, 9 tool changer positions, 3028.2 read operating hours, machine dimensions 324 x 302 x 187 cm (height), PC stand 55.5 x 140 x 172 cm (height), CNC suitability: metal-glass-PVC. 2x vacuum pumps Becker type VTFL2.200/0-79, max 200/200 mbar, mounted in frame 140 x 77 x 174 cm (height). Dena mobile extraction type APL30-500, year of manufacture 2018, motor Esam mdeio jet AAO. Rack 106 x 32.5 x 125 cm (height) with accessories, in operation. Video available. Pedpfx Ahey D Hrusyspr

Condition: used, Year of construction: 2003, functionality: fully functional, Mazak Quick Turn Nexus 150/500 YOM 2003 Mazatrol PC Fusion Control Pjdpfx Ahsyplgtsyspr Mazak Tool Length Measuring System Serial Number 166285 Main Spindle has been fully refurbished 8 Station Turret Programable Tailstock Parts Catcher Swarf Conveyor RH exit Machine has been fully serviced Complete set of Machine Manuals UK buyers - Price £19,995 + VAT

Condition: like new (used), Year of construction: 2018, operating hours: 9,251 h, functionality: fully functional, type of input current: three-phase, We offer this used Haas ST-10 CNC turning and milling center, year of manufacture 2018. Model: ST-10 Serial number: 3109692 Date of manufacture: 01/2018 On timer: 9251 h Cut in move timer: 2484 h Pjdpfxey D Eprj Ahyopr If you have any further questions or need more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, MAZAK QUICK TURN 100MSY Max. turning diameter: 280 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA 3-jaw chuck for main spindle, diameter 169 mm - KITAGAWA 3-jaw chuck for secondary spindle, diameter 135 mm - Tool Eye - C-axis - C-axis on sub-spindle with 0.0001° resolution Podpfxeygi A Hs Ahyepr - Y-axis - Automatic parts catcher - Signal light (3-color LED) - Reinforced coolant pump - Chip conveyor - Standard MAZAK tool package

Condition: used, Year of construction: 2011, Technical details: Ppedpfx Aheyz Sdqsyer weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for finishing operations, equipped with C-axis, Y-axis, and driven tools, installed in 2002, compliant with CE standards, and refurbished! Main features: Turning diameter: 755 mm Machinable diameter: 390 mm Machinable length: 655 mm 12-station turret with driven tools Y-axis travel: +/- 60 mm C-axis Spindle nose: A2-8 Kitagawa B-210 (250 mm) Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Ppjdpoxf Iygofx Ahyjr Tailstock: MT5 Rapid traverse speeds: 18 m/min (X-axis), 24 m/min (Z-axis) Weight: 5,800 kg Comes complete with: - Hydraulic tailstock - Prismatic guideways - Chip conveyor - Headstock oil cooler - Double foot pedal for opening/closing the main chuck and tailstock - Set of fixed tool holders - Set of driven tool holders - Complete set of manuals - CE certificate

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning length: 513 mm, turning diameter over cross slide: 300 mm, spindle speed (min.): 4,500 rpm, spindle bore: 76 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 580 mm, DOOSAN PUMA 240MS LATHE WITH SUBSPINDLE AND BAR FEEDER Ppjdpfx Ahoyivakoysr