Used Glue Application Fingerjointing for sale (9,321)

Condition: excellent (used), Year of construction: 1995, Rotary / carousel wood gluing press HESS, 6 meters Year of manufacture: 1995 The press is operational and in good technical condition. Press infeed • Glue application machine with 2 rollers Technical data of the HESS gluing rotor • 4 working areas, each 6,200 x 1,000 x 150 mm • 4 pressing sections • 8 sliding pressure beams • 2 pneumatic pressure cylinders per each pressure beam • 21 hydraulic rams from above • Pressure force per cylinder: 35,000 N / 3,500 kg • Maximum total pressure at 120 bar: max. 73.5 tons per pressing surface Itodpoy Rzk Sofx Abnjk Machine dimensions • Total length: rotor 11,100 mm • Depth: 3,050 mm • Height: 3,350 mm • Weight: 13,500 kg

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back Itsdpfx Aboyzcycsnsk - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. Ijdpfx Abezr N Hujnetk The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested Itjdpfoul Shnjx Abnjk

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. Itsdpfjzn N Ecjx Abnek • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 Ijdpfx Aozpzy Uobnstk ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: excellent (used), Casadei 350PM edger, Felder G263 Liquids Pre-milling cutters, Plate heating, Roller glue application, Pneumatic pre-trimming saw, Pressure rollers, Front-rear trimming saw, Top-bottom milling unit R1 – R2, Profiling cycle R1 Flat cycle, Machine length 230cm, Feed rate 7m/min, Max. component height 45mm, Max. edge thickness 2mm, Iodpfx Aezu Nxvebnstk Used machine in very good condition Mileage 6,800 meters Purchase possible through leasing.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer this excellent HEBROCK AKV 3005 DK-F Airtronic edge banding machine with solid edge band magazine, manufactured in 2014. Manufacturer: HEBROCK Model: AKV 3005 DK-F Year of Manufacture: 2014 Condition: very good Category ID: 877 Type: Airtronic edge banding machine with solid edge band magazine Hebrock AKV 3005 DK-F edge banding machine (2014) – Fully equipped with Airtronic & Solid Edge Band Feeder An extremely well-equipped and production-ready edge banding machine. The machine is in very good condition; this specific machine is equipped with Hebrock’s Airtronic unit for zero-joint/laser-joint (hot-air system) and a solid edge band magazine for thick wood edges. The machine has a complete processing line, which means a finished result directly from the machine without the need for post-processing. Itodpfx Aozrm Dqebnsk Pre-milling: Double pre-milling cutter (joint milling) with diamond tools for a perfect cutting surface. Gluing system: Traditional glue application (hot melt) + Airtronic unit for seamless zero-joint. Magazine: Automatic edge band magazine, also optimized for solid edge bands. Cutting: 1 high-precision cutting blade. Milling: Upper and lower milling unit for radius and bevel milling. Corner rounding: Integrated corner copying/corner rounding for finished corners. Finishing/Post-processing: Profile scraping (radius scraper), flat scraping (surface scraper), and polishing unit. The machine handles everything from thin rolls (ABS/PVC) to thick solid wood edges. Thanks to the Airtronic system, you can achieve the sought-after "invisible joint" required in modern furniture manufacturing. The machine can be demonstrated in operation by appointment. The buyer is responsible for removal and transport. VAT will be added to the price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm Itjdsrx S Ipjpfx Abnek - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Year of construction: 2022, condition: used, Year: 2021/2022 Condition: very good, functional Counter: 13M envelopes Machine Type: Automatic mailing and fulfillment line for collating, inserting and sealing envelopes with the capability of processing rigid and thick products. - Manufacturer: CMC S.p.A., Italy - Model: CMC Smart Mailer / Rigid Mailer Special Technical Specifications: - Maximum mechanical speed: up to 4,000 envelopes/hour - Envelope width: 250–350 mm - Envelope length: 280–350 mm (including flap) - Product thickness: min. 2 mm / max. 25 mm - Recommended envelope flap height: 50–70 mm Configuration: - 2× A15 – Electronic hopper feeders for rigid and thick products - A21F – Photocell-controlled thickness gauge - 3× A14Q – Sheet feeders for inserts - SEP1 – Rotary separation disc - F15 – High-speed sheet feeder - A14_Env_L – Large envelope feeder - Vacuum Belt – Vacuum conveyor - HM1 – Automatic programmable hot-melt gluing system with 1 glue gun - RA20_i – Conveyor for collation of staggered products - PC_Add Special – Software for print verification, barcode reading and database management - 2× SDC – Sound-deadening boxes for vacuum pumps - F15 High-Speed Sheet Feeder - Minimum format: 80 × 110 mm - Maximum format: 210 × 300 mm - Minimum paper weight: 70 gsm - Maximum product thickness: 2 mm - Loading capacity: up to 500 sheets - Double-sheet detection system - Brushless motor drive - A15 Hopper Feeder - Product length: 120–320 mm - Product width: 100–300 mm - Product thickness: 1–25 mm - Suitable for rigid products, stitched products and bound booklets. - A14Q Sheet Feeder - Product length: 100–210 mm - Product width: 110–300 mm - Product thickness: from 1 sheet (70 gsm) up to 4 mm - Minimum paper weight: 70 gsm - Utilities - Main power supply: 14 kW, 400 V AC, 27 A, 3-phase + N + PE - Auxiliary power supply: 3 kW, 230 V AC, 15 A - Compressed air: approx. 600 l/min at 6 bar - Clean, dry and oil-free compressed air required. Machine Dimensions: According to the machine layout, the main production line has an overall length of approximately 10,100 mm with a maximum overall width of approximately 4,300 mm. The layout is indicative and subject to final machine configuration. Machine Description: The CMC Smart Mailer is a high-performance automatic mailing and fulfillment system designed for collating, verifying, inserting and sealing envelopes. The machine is capable of processing single sheets, inserts, stitched brochures, bound booklets and other rigid products up to 25 mm thick. Iodpfxsztc Afj Abnjtk Equipped with automatic thickness control, double-sheet detection, barcode reading, print verification, database management software and programmable hot-melt gluing, the Smart Mailer ensures maximum production efficiency, accuracy and reliability. With a mechanical speed of up to 4,000 envelopes per hour, it is an ideal solution for direct mail, transactional printing, fulfillment and document mailing applications.

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 Itjdozhaadspfx Abnok - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Iodpjy Exwfofx Abnstk Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Iodpfxey Scb Ie Abnotk Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: - 2 labelling aggregates - 1 × Neck and front label station - 1 × Back label station (disengageable)   Glue system: - 2 glue pumps - Hot glue for neck label (tamper-evident / closure sealing) - Cold glue for front and back labels - 1 spare hot glue unit included Dimensions: - Depth: 4,300 mm - Width: 3,300 mm   Iodpfx Aeyt Iltsbnotk Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored  

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Ijdpfozbunksx Abnetk Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Iedpfszc Agkjx Abnstk Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2009, Second-hand machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0–100 mm - Application rollers Ø 185 mm - Feed speed 24 m/min - Work surface height: 800 mm - Groove spacing between rollers: 2 mm - Motor power 0.37 kW - Glue distribution tank made of painted sheet metal - Water tank made of galvanised sheet metal - CE marking - Voltage 400/50/3Ph Ijdpfx Abszk Nxbsnetk Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Itsdpozuynzofx Abnek Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) Itedpszpzy Isfx Abnsk - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Iedpszkh S Hsfx Abnetk Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A Itedpfszug Smsx Abnjk • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is not included in the offer includes the machine only.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Isdpfxoy Azv Ss Abnstk

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Maximum pressure 5 bar Itjdpjqu N U Defx Abnjk

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Itsdpoia Naqofx Abnjk Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm CE marked Technical specifications subject to change

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, pressing force: 90 t, total length: 7,700 mm, total width: 7,400 mm, total height: 2,350 mm, working width: 1,300 mm, working length: 3,000 mm, Throughfeed press for laminated panels ITALPRESSE PL/9 Shelf length: 3000 mm Shelf width: 1300 mm Number of vertical cylinders: 6 Vertical cylinder pressure: 90 t Vertical cylinder diameter: 70 mm Number of horizontal cylinders: 6 Shelf heating using a high-frequency generator The line consists of: – Material feed section – Glue application section – Material loading section Iedpfx Aoxy Rm Ejbnstk – PL/9 press – Output table for material CE certificate Line dimensions: 740x770x235 cm (H) Weight: approx. 8000 kg