Used Glass Drill for sale (8,219)

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) Lhodpfxsw I Uwxe Aiish 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. Ledpew Rhk Rsfx Aiijhh - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Condition: Like new Ljdpfx Aiev Ntb Ioijhh Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Availability: by arrangement Ljdpfow I Um Tsx Aiishh Location: Solingen

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale Ljdpfx Aiow Nabxeiohh with reversible folding fence Foot valve control NRW

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm Lhedpfsy Ih Skex Aiieh - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, High-speed milling spindle, HENNINGER Type 814 / 5131 / 1:5 / 15000 Maximum speed: 15,000 rpm at 70% duty cycle Gear ratio: 1:5 Power transmission: up to approx. 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: MK4 with M16 draw-in thread Collets, Type OZ16, Ø: 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Lsdpef Axn Usfx Aiijhh Weight: 6.5 kg Good condition.

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Speed range 20 – 1200 rpm Machine weight approx. 3.0 t Lhsdpjzgdfbofx Aiioh

Condition: used, Year of construction: 1970, Technical details: Lodpfx Aijzgcx Hjishh bore stroke: 170 mm total power requirement: 3,5 kW dimensions of the machine ca.: 0,75 x 1,10 m

Condition: used, Bottling line for approx. 5000 bottles/h Additional title: returnable glass bottle filling, years of construction 1990 - 2016 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Position: free standing Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank Ledpfx Aezgcuhjiijhh

Condition: good (used), Year of construction: 1992, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Alzmetall, Pillar drilling machine type AX2 S -Spindle mount: MK2 -Motor: 0.37 / 0.55 kW -Speed adjustment: stepless -Speeds: 450 - 4300 rpm Lodpfx Aijyv Ahvjiehh -Table size: 250 x 250 mm -Travel distance: 560 mm -Spindle stroke: 90 mm -Protrusion: 250 mm -Column Ø: 90 mm -Dimensions: 720/540/H1650 mm -Weight: 145 kg

Condition: used, functionality: fully functional, Comec FMC 900 Drilling Machine Automatic loading from a magazine Number of spindles: 4 Main motor power: 4 kW Maximum element length: 900 mm Maximum element width: 100 mm Lhjdpfxjzga Eqj Aiieh Maximum drilling distance: 800 mm Application: Suitable for large-scale production of chairs, beds, cots, and components for other furniture.

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. Lhjdpfx Aijzgaiisioh *

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, TECHNICAL DETAILS Number of upper units: 4 With NC positioning: yes Lateral horizontal units: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With NC positioning: yes With NC "Z"-axis positioning: yes Lhedpfszf Ibwex Aiieh Spindles for horizontal drilling: 12 MACHINE DETAILS Control system: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8649

Condition: not inspected (used), Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Ljdszf Ibdopfx Aiiehh Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, FEMCO BMC 110 T2 Drilling Machine (T-design) – available for short-term delivery The FEMCO BMC 110 T2 is a classic drilling machine for heavy-duty and high-precision machining. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 20 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Support bearing: Spindle support bearing ø 250 mm Ledpfexc Hphjx Aiiohh Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.010 mm Your advantages with JMT: ✔ Official FEMCO distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TM 4 T-frame traveling column milling center The LAGUN TM 4 is a highly stable T-frame traveling column milling center for heavy and precision machining. Ideal for single-part production as well as series production with the highest demands on rigidity, accuracy, and reliability. Lhedpfx Aeq I Nkbjiijh Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines are impressive due to their high reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip disposal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, LAGUN TL 4 – T-frame Design Machining Center The LAGUN TL 4 is a highly stable, T-frame machining center designed for heavy-duty and precision machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy, and reliability. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines impress with their high reliability, ease of maintenance, and economical operation. Technical equipment: Control: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply Ledpfx Asq I Nlyjiiohh ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine Lhsdpey Tkhfefx Aiioh ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs Lhedpfx Aioy Tw Tzjieh - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding Lhsdey Tivbepfx Aiieh - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Condition: excellent (used), CATALOG NO. 7911 TECHNICAL DATA - Number of spindles: 29 pcs - Distance between outermost spindles: 900 mm - Spindle pitch: 32 mm - Table surface: 700x1220 mm Lhsdpfxey Tw Swo Aiijh - Table height: 930 mm - Pneumatic clamps: 3 pcs - Drilling vertically, horizontally, and at an angle - Vertical/horizontal operation – pneumatic table adjustment - Pneumatic lifting of drilling head - Dimensions (L/W/H): 1400/1050/1400 mm - Weight: 744 kg ADVANTAGES – Manufactured by Italian brand SCM – For 29 drills – Not repainted – Very good condition – Used drilling machine Net price: 5,900 PLN Net price: 1,400 EUR at an exchange rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL SPECIFICATIONS - Number of spindles: 21 pcs - Distance between the outermost spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to the table surface: 900 mm - Stroke of the feed cylinder: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling head adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES – 21 spindles – drill bit mounting with quick-release fittings – Vertical, horizontal, and angled drilling – Unpainted – Used drilling machine, very good condition Lhsdpfxsy T Rmhs Aiioh Net price: 7900 PLN Net price: 1880 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently Lhsdpfjy Sz Umjx Aiioh - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Ljdpetpgcnjfx Aiishh Misc accessories MARCELS MASCHINEN CH