Used Ghiringhelli 200 for sale (15,972)

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Bwjdpfegkgwfsx Afmsp Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Bodpewc Rk Ejfx Afmswp Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, 200 running meters Pallet Rack Schäfer Palflex Used equipment in good condition, see pictures. Height: 6.5 m Depth: 110 cm, galvanized Bay load: 24,000 kg Beam length: 4.1 m, orange Load capacity per beam/level: 3,000 kg Negotiation price: €17,900 net ex stock The offer includes: + 49 pre-assembled frames, depth 110 cm, height 6.5 m + 288 beams, length 4.1 m, load capacity per level 3,000 kg + 576 safety locking pins + 196 concrete anchors Used corner guards available immediately at an extra charge of €15 each net! Load capacity plates, documentation etc. are of course included. Additional accessories are available in the accessories catalog. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information upon request. Bwodpovfnnzsfx Afmop Over 5,000 running meters of pallet racks from various manufacturers always in stock. (Specifications, information and pricing subject to change and prior sale! Please see our Terms & Conditions. All prices ex VAT ex stock.)

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! Bwjdpfx Afsya Nf Ijmsp 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: used, Year of construction: 1995, Centerless Cylindrical Grinding Machine Ghiringhelli M100SP400 Workpiece diameter: 1–50 mm Maximum plunge grinding length: 100 mm Grinding wheel diameter max.: 406 mm Grinding wheel diameter min.: 260 mm Grinding wheel width: 80 mm Grinding wheel speed (new): 2,140 rpm Grinding wheel speed (worn): 2,579 rpm Peripheral speed: 45 m/s Drive wheel indexability: ±6° Drive wheel diameter max.: 200 mm Drive wheel diameter min.: 80 mm Bedpfoxz R U Ejx Afmowp Drive wheel speed: 0–140 rpm Dressing speed: 200 rpm CNC control: Siemens 810 GA3 Machine width: 3,100 mm Machine depth: 2,700 mm Machine height: 2,000 mm Total weight: 2,500 kg Total power: 12 kVA Supply: 380 V/50 Hz Hydraulic pressure: 2–3 MPa Pneumatic pressure: 0.5 MPa No guarantee is given for the correctness, completeness, or accuracy of the information provided.

Condition: excellent (used), COMPLETE TETRA PAK LINE MODEL TBA9 200ml SLIM FILLER TBA9/200S, V120, YOM 1993, 52.000 RUNNING HOURS TSA 36 STRAW APPLICATOR U-form TETRA PACKER TCBP 50-030 WRAP AROUND TETRA MULTISHRINK TMS 63-050V, packing 2X3 CONVEYORS SYSTEM THE LINE IS STILL IN PRODUCTION Bwjdpfxovvn Ayo Afmsp

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Bodpfjh R Tvtjx Afmswp

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. Bwedpfxeudvt Rj Afmop be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm Bedpfx Afjzgufremjwp C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: used, axle configuration: 3 axles, first registration: 07/2009, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, total length: 14,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,450 mm, color: other, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Payload: 33,400 kg, Unladen weight: 8,600 kg, Gross weight: 42,000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2009, Body material: Aluminium, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: ON-34-DJ Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tread depth left: 11 mm; Tread depth right: 5 mm Axle 2: Tread depth left: 8 mm; Tread depth right: 4 mm Axle 3: Tread depth left: 2 mm; Tread depth right: 3 mm Weights Unladen weight: 8,600 kg Payload: 33,400 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Maintenance APK (General Technical Inspection): valid until 12.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good prices • Proper business conduct Bjdpfx Aoy Irn Aofmswp • We speak many languages • We understand our customers • Assistance with import and transport • (Export) licence plates quickly arranged • Expert technical services • The security of “recognisable quality” • And much more.... Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly for our European warranty package.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment Special drilling machine for stair construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily achieved thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowelling on two levels without readjustment The desired drilling heights can be set for each drilling level with a handwheel and digital counter; switching is then done pneumatically from the front Crossfeed approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been repaired, very good condition, see original photos A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. Bsdjyfta Topfx Afmjwp The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m Bwsdpfoxwdrvjx Afmsp height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t Bwsdpevzxqrsfx Afmjp stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: Bwodpfx Afjzinlwomop - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min Bjdpfx Aszimu Defmewp C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Bwsdszil T Eopfx Afmsp Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Bwedpfx Afjv Tbaaomop Device in very good condition. Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: used, functionality: fully functional, Year of construction: 1998, Punching force: 165 kN Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Bwedpfjzilz Aex Afmjp Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Bedpfsziltrsx Afmjwp

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Bwjdpfx Afszii Akomjp Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details Bedpfx Aoziiz Hsfmjwp UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Bodpjxy Tlwsfx Afmswp

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Bwjdpfx Afsywxwpemop Max. push length: 3000 mm

Condition: new, pressure 200 t stroke 400 mm cylinder diameter 170 mm work height max. 900 mm Front light range 1330 mm Lateral light range 450 mm Bwedpfx Ajyv Nd Dofmep total power requirement 7,5 kW weight of the machine ca. 2600 kg dimensions of the machine ca. 2500x1100x2800 mm Accessories / equipment: - stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material supports adjustable in height by cylinder - CE mark

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min Bodpfey Sltgjx Afmjwp • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No Taper Size Capto C6