Used Fuchs Hdms 0.8 Cbm for sale (1,265)

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Kodpfxsyh A Iio Aa Eodp Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR Walkingfloor 70 cbm in full specification First registration Internal dimensions (LxWxH): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Ksdpfx Aozmqmrea Eedp Fifth wheel height: 1,250 to 1,300 mm Overall height: 3,900 mm SAF axles "Off-Road" with large 430 mm disc brakes WABCO trailer EBS with RSS stability program Chassis made of fine-grained steel, hot-dip galvanized Forced steering on 1st and 3rd axles, TRIDEC system with rod linkage 3x central grease points located externally Tyres: 6 x 445/65 R 22.5 Cargo-Floor AGRAR floor with 15-board system, reinforced version, 10 mm RADIO remote control for floor and rear wall flap Side wall joint seams fully welded inside (grain version) 2x reinforced cross members Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic tailgate with grain chute Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC PARTITION POSITIONER Roll-up roof tarpaulin with quick tensioning system RENTING is the new BUYING, and with us IMMEDIATELY available also with full-service rental-----

Year of construction: 2026, condition: new, functionality: fully functional,

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: 13500 MM Internal body width: 2475 MM Internal body height: 2650/2740 MM Body volume: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME High-quality construction made of steel S355JR (= ST52.3). Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanized. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing lift axle (front/rear internal height 2650/2740 mm) + first axle is a lift axle. STARTING ASSISTANCE activated when a button is pressed in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering mechanism. Aluminum air reservoir. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE SUPPORT JOST module with leveling supports for air-suspended vehicles. Mechanical version with single-sided operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line pneumatic braking system acc. to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets. REAR LIGHTING IN THE UNDERRIDE GUARD. With aluminum lighting protection (foldable). 2 x 1 five-chamber lamp - EUROPOINT III - LED version. WORK LIGHTS ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control panel. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch at the front. Kodpfx Aaszfdgie Eodp HYDRAULIC SYSTEM Pressure: ? Female. Return: 1 Female. HYDRAULIC POSITION Connection on the front wall. With extra connection option below the body in front of the support legs. Aluminum access ladder (3.7 m) attached to the side underride guard (right). RETRACTABLE LADDER AT THE REAR integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with 1-piece cover plate (tarpaulin not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). At the rear LEFT. POSITION CONTROL CONSOLE + HYD. SYSTEM BOX The control console is mounted at the rear left. The box for controlling the floor is also mounted at the rear left. FENDERS 6 plastic single wheel fenders. 2 Clear Pass mud flaps are permanently mounted on the plastic fenders. 2. TIPPER BODY FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles type 600 with reinforced corner connections. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Permanent sealing between floor and front wall by means of aluminum profile and PVC sealing. SIDE WALLS Side walls in smooth design inside and out. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded on the inside. SLIDING FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric control. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. FLOOR SYSTEM OPERATION Electric control - electrically with wireless remote control (original Cargo Floor + Multif

Condition: used, maximum load weight: 29,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, Year of construction: 2019, Equipment: ABS, Air suspension, lifting mechanism, BPW axle, EBS (Electronic Braking System), aluminum support legs, PVC partial wheel arches, 2 x twist locks, side impact protection (right), access ladder, foldable UFS (underfloor storage) made of aluminum, reflective sign, aluminum rims, load indicator, aluminum tipper body, floor 10 mm thick, wear plate on the floor 7 mm thick, side walls and front wall 7 mm thick, side wear plates 5 mm thick, rear wall 10/5 mm, Cramaro tarpaulin system. Kdjdpfsrxa Npex Aa Eop

Condition: used, mileage: 1,001 km, color: orange, driver cabin: other, gearing type: other, loading space volume: 13 m³, loading space length: 4,600 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, Vehicle location: Bovenden, steel body Ksdpfx Aovhgy Uja Esdp Body: for 3-axle trucks, approx. 13 m³, hydraulic tailgate. Roof protection. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 27,360 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 04/2024, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,265 mm, Year of construction: 2024, Equipment: ABS, KÖGEL 2-axle HardoX Halfpipe Tipper Trailer, 27 cbm First registration 04/2024 Mileage 128,729 km Permissible total weight 33,000 kg Fifth wheel load 15,000 kg Unladen weight 5,640 kg Loading height only 3,265 mm CRAMARA electric cover with remote control pneumatically folding underride guard hinged tailgate tipper body with HardoX HB450 steel, 5 mm thick Tires 4 x 385/65 R 22.5, tread depth 10 to 12 mm ALCOA aluminum rims, glossy black WABCO Trailer EBS Premium with stability program WABCO Smartboard reinforced SAF axles "CD" Offroad with large disc brakes, 430 mm Ksdjzlmpmopfx Aa Esdp 1st axle: lift axle Trailer brake RENTING is the new BUYING, and with us, it is immediately available in a full-service rental arrangement.

Condition: used, maximum load weight: 32,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,340 mm, loading space height: 1,550 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2024, Equipment: ABS, 3-axle REISCH THERMO HardoX® Half-pipe, 24 cbm, with full thermal insulation First registration Kdsdpfezlmpaox Aa Eep Loading space dimensions (L x W x H): 7,300 x 2,340 x 1,550 mm Volume: 24 cbm Saddle height: 1,200 to 1,280 mm Loading height/overall height: 3,400 mm SAF axles, reinforced CD version (off-road) with large disc brakes, 430 mm 1st axle: lift axle WABCO trailer EBS with RSS stability program FERTIGER brake Lighting system: HELLA Tires: 6 x 385/65 R 22.5 Tread depth: 1st axle: NEW, 100% 2nd axle: 13 mm 3rd axle: 12 to 13 mm Ferry lashings, tie-down rings for ship loading Towing eye at the rear end of the frame HYVA tipping cylinder, high pressure 250 bar, smallest stage hard-chromed Tipping angle: 48° Fully insulated HardoX® half-pipe ISOTEXX insulation, 60 mm thick, stainless steel sheet cladding Trough floor made of 5 mm HB450 Trough walls made of 4 mm HB450 Reinforced tarpaulin cover, 900 g/m², with central closure Internal steel pendulum tailgate (with chute) RENTING is the new BUYING; with us, it is ALSO available immediately in a full-service rental arrangement.

Condition: used, mileage: 446,000 km, power: 324 kW (440.52 HP), first registration: 06/2007, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 14,300 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, loading space volume: 30 m³, Equipment: ABS, cabin, compressor, differential lock, navigation system, onboard computer, Vehicle location: en route / in transit, aluminum body, metal cab, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio/CD player, navigation system, ABS (anti-lock braking system), auxiliary drive, raised exhaust, automatic transmission, lifting and lowering function, differential lock, storage compartment, leaf and air suspension, last axle can be lifted and steered, aluminum rims, compressor system, catwalk, green environmental badge. Wheelbase: 4200 mm, body: 30 cbm FFB silo body, 4 dome lids, weighing system, RTI compressor, with weighing system, trailer crossmember available, disc brakes on front and rear axles, data subject to change as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kdodpfxezmivlo Aa Ejp

Year of construction: 2026, condition: new, functionality: fully functional, For sale: skip loader container, 5.5 - 12 cbm, with steel lid. Product description: For sale is a 10 cbm skip loader container with a steel lid, manufactured according to DIN 30720‑1, ideal for the transport and storage of waste, bulk materials or industrial materials. The container is robust, safe and ready for immediate use. Technical data: Standard: Technical description 30720‑1 • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (pin Ø45) x 2 • Stacking bar: 5 mm • Securing bar • Front profile: 120 x 60 x 4 mm x 2 • Frame edges: U 100 x 50 x 4 mm • With steel lid - 1.2 mm • Information and warning stickers, white and red • The entire range of RAL colors is available • Zinc phosphate primer inside and outside, painted with synthetic resin paint (80-100 μ) outside Certificate: CE Warranty: 2 years Advantages: Kdsdpjzmh R Isfx Aa Eop Robust construction for heavy materials Easy handling thanks to flap and sturdy hinges Stackable and transportable with tilting truck systems Weather-resistant due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, For sale: 4-10 cubic meter skip loader with a flap Product description: For sale is a 4-10 cubic meter skip loader with a flap, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical specifications: * Standard: Technical description 30720-1 * Base: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles are welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking rail: 5 mm * Securing rail * Frame edges: U 100 x 50 x 4 mm * Frame edges flap: U 100 x 50 x 4 / 100 x 50 x 6 mm * Information and warning stickers: white and red * Color: entire RAL color palette available * Coating: zinc phosphate primer inside and outside, painted with synthetic resin paint outside (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the flap and sturdy hinges Kdodjzmhuyspfx Aa Eop * Stackable and transportable with tipping truck systems * Weatherproof due to corrosion-resistant coating

Year of construction: 2026, condition: new, functionality: fully functional, Selling a roll-off container, 4-20 cubic meters, without a lid. Product description: For sale is a 4-20 cubic meter roll-off container without a lid, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: * Standard: Technical description 30720-1 * Bottom: 6 mm, steel S355 * Sides: 4 mm, steel S355 * All sheets and profiles welded * Corner reinforcements * Double-sided 3-point tilting bearing (pin Ø45) x 2 – simple and safe emptying * Stacking bar: 5 mm Ksdozmhdhepfx Aa Ejdp * Securing bar * Front profile: 120 x 60 x 4 mm * Frame edges: U 100 x 50 x 4 mm * Information and warning labels: white and red * Color: entire RAL color range available * Coating: interior and exterior with zinc phosphate primer, exterior painted with synthetic resin paint (80–100 μ) * Certificate: CE * Warranty: 2 years Advantages: * Robust construction for heavy materials * Easy handling thanks to the lid and sturdy hinges * Stackable and transportable with tilting truck systems * Weather-resistant thanks to corrosion-resistant paint

Condition: excellent (used), Year of construction: 2015, operating hours: 22,000 h, functionality: fully functional, overall weight: 98 kg, load capacity: 6 kg, arm reach: 800 mm, controller model: IRC5, Industrial robot ABB IRB140-6/0.8 The robot is fully functional. Kdedpoxcxcgefx Aa Ejp Year of manufacture: 2015. Power supply: 3 x 400V. 22000 operating hours. For further information, please do not hesitate to contact us. Other robots available from stock: Fanuc M10iA R30iB Mate.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Kedpfey Urtfex Aa Eedp Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Kdjdpszmcn Ujfx Aa Eep Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30 Code L4BH, for chemicals First registration: 01/2023 German registration, from first owner Approximate unladen weight: 6,910 kg Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, for full load 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 manhole covers 1 venting valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation for 4-channel hot water 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling 1 purging device Pneumatic bottom valve Hoses, left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental. Kdodpfxjzkybms Aa Esp

Condition: used, first registration: 09/2018, Year of construction: 2018, Ardor SVM 38 m³, cement/silo semi-trailer, 3 compartments, Alcoa In good condition! • ABS / EBS • Lift axle • Disc brakes • 3 x air-suspended SAF axles • Lifting/lowering system • 3 compartments • 3 x dome lids • Direct discharge to the rear • Working pressure: 2 bar • Test pressure: 3 bar Kdedpfxezlxlmj Aa Eop • Vehicle external dimensions: 7,700 x 2,550 x 3,900 mm • GVWR: 39,000 kg • Payload: 32,510 kg • Tare weight: 4,490 kg • Alcoa aluminum rims • Tires 385/65 R22.5 • Tread depth: 13/11 / 13/13 / 13/12 - German semi-trailer! - First owner - TÜV / inspection: on request and subject to an extra charge: new! Errors and prior sale excepted! = Further information = Tare weight: 4,490 kg

Condition: used, maximum load weight: 33,450 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2024, Equipment: ABS, 3-axle tank semi-trailer KÄSSBOHRER, type STC 28/1-10/24 First registration 04/2024, German semi-trailer, first owner Mileage only 52,629 km Permissible total weight 39,000 kg Permissible saddle load 12,000 kg Unladen weight approx. 5,550 kg Wheelbase approx. 5,900 mm Saddle height approx. 1,200 mm Kdedpezbwy Nefx Aa Ejp Tank semi-trailer made of V2A stainless steel, material 1.4301 Insulation 100 mm Volume 28 cbm, with 2 baffle plates Discharge via outlet with butterfly valve, ending in the rear compartment 1 x filling dome/manhole DN 500, walkway around the dome Fixed access ladder, on the right side of the tank Aluminum short chassis Mechanical landing gears JOST, 24 tons Wabco Trailer-EBS-E Type 4S/2M with RSS anti-roll protection BPW axles with disc brakes Tires 6 x 385/65 R 22.5, tread depth 10 to 12 mm Aluminum rims, polished 1st and 3rd axles are lift axles Access ladder on the right side of the tank with APOLLO pump, type Magnum L, self-priming centrifugal pump 3" in the rear compartment. Due to the special design of the Magnum centrifugal pump, the pump can also draw in a gas/liquid mixture. For the transport of liquid fertilizers, pesticides, urea, AHL, whey, etc. Pressure Hmax: 0-3 bar Flow rate Qmax 500 - 1000 liters/min. Free-fall connection RENTING is the new BUYING, with us, full-service rental is also IMMEDIATELY available.

Condition: used, maximum load weight: 34,740 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 8,870 mm, loading space width: 2,325 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,637 mm, Year of construction: 2026, Equipment: ABS, STAS 3-axle HardoX steel tipper, 45 cbm, "X-Shape" First registration: 03/2026 New vehicle Kjdpfxeziwl He Aa Esdp Dimensions (L x W x H): 8,870 x 2,350/2,450 x 2,100 mm (tapered design in width) Unladen weight: only 7,260 kg Z-chassis, curved design Floor: continuous 5 mm HardoX steel HB450 Front and side walls: 4/3 mm HardoX steel HB450 Sloping front wall, with internal steps 2-wing portal doors, pneumatic secondary release 1 grain slide in the right door leaf Reinforced roof cover, central locking HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU saddle supports, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, full-service rentals are immediately available.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm Kdsdpfxov Dz Ixs Aa Eop First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, empty load weight: 5,300 kg, maximum load weight: 27,700 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 03/2000, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,450 mm, loading space volume: 24 m³, total length: 2,550 mm, total width: 3,200 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, SAF axles, air suspension, ABS (anti-lock braking system), folding U-guard, chute Body: Aluminum round body 24cm³ with inserted steel floor, empty weight: 5,300 kg SAF axles, disc brakes, steel floor inserted on aluminum, ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Kjdevhhrlepfx Aa Esdp

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 34 Code L4BH, for chemicals First registration 05/2023 German registration, from first owner Ø Unladen weight approx. 7,580 kg Ø Stainless steel chassis, highly polished Ø BPW axles with large disc brakes, 430 mm Ø 1st axle: LIFT AXLE Ø Crank-operated support legs, steel, for full load Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims ALCOA Dura-Bright, high-gloss Ø WABCO trailer EBS with RSS anti-roll protection Ø Tank: 34,000 liters, stainless steel 1.4571 AISI 316 Ti Ø Operating pressure: 3.0 bar / Test pressure: 4.0 bar Ø Insulation: 100 mm glass wool Ø 1 compartment with 4 bulkheads Ø 5 manholes, 3x DN500 and 2x DN350 Ø 1 vent valve, Fort Vale Ø 1 safety valve Ø 1 check valve Kdedpfx Aaex Rtafs Eop Ø Air line on the right side, DN 50, with TW 50 connection at the front right Ø Heating preparation, 4-channel hot water Ø 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling Ø 1 purge device Ø Pneumatic bottom valve Ø Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING, also available with us in a full-service rental arrangement.

Condition: used, maximum load weight: 35,850 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space length: 10,648 mm, loading space width: 2,470 mm, loading space height: 2,100 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,640 mm, Year of construction: 2023, Equipment: ABS, GRANALU 3-axle FULL aluminum box tipper GRANALU 55 cbm, WATER-TIGHT Kdedpjw I Ixvjfx Aa Eop First registration: 01/2023, from first owner Mileage only 68,989 km Loading length: 10,648 mm Side height: 2,100 mm Internal width: 2,470 mm Total height / loading height: only 3,640 mm Unladen weight: only 6,150 kg HYVA tipping cylinder, type ALPHA, suitable for low and high pressure Continuous 6 mm highly wear-resistant HERKAL trough floor Aluminum wave breakers on front and rear wall, extending approx. 600 mm into the body (removable) Single-wing rear door with swinging function and pneumatic 4-point locking system, waterproof design JOST axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE WABCO trailer EBS with RSS rollover protection 6x 385/65 R 22.5 tires Aluminum air tanks 2 LED reversing lights Full-load aluminum landing legs RENTING is the new BUYING—immediately available from us with full-service rental option.

Condition: used, maximum load weight: 32,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2024, Equipment: ABS, SCHWARTE-JANSKY stainless steel V2A slurry tanker semi-trailer, 30,000 liters First registration 03/2024 Unladen weight only 6,180 kg BÖRGER rotary lobe pump, output max. 6,000 liters/min., with interchangeable housing shells, design without gearbox Automatic pump shut-off, filling level of the tank can be easily adjusted by the driver Flushing line DN150, with 3 outlets (in front of each baffle and in front of the front floor) 2x baffle plates Manhole cover DN500 Suction funnel 8" at the top rear Hose trays, stainless steel, approx. 6,000 mm long on the left Swivel outlet at the rear in 6" with Perrot coupling Emptying device for the product hose All valves pneumatically operated, including monitoring function Valve control with WIRELESS REMOTE CONTROL Complete piping system made of V2A stainless steel SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE 3rd axle: Steerable trailing axle WABCO trailer EBS with RSS stability program Tires 6x 385/65 R 22.5 Saddle height approx. 1,150 to 1,250 mm Crank-operated full-load saddle supports Ksdpfx Aoy S Npxsa Eedp Stainless steel storage box on the left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING; with us, it is also immediately available with a full-service rental.

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Aluminum air tanks Kdsdpsyrlcgsfx Aa Esp 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.