Used Flexo Printer for sale (2,507)

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 2525797057901, • CMYK + Lc Lm + 2 x White • White in the pre- and postprint • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing Fodswh Si Hspfx Alqspg • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Fsdpfxowh Shcs Alqepg Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Year of construction: 2010, condition: excellent (used), machine/vehicle number: LNDE002222, Ink Technology Ultrachrome® Colours Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size 3,5 pl Nozzle Configuration 360 Nozzles Black, 360 Nozzles per Color Printing Resolution 2.880 x 2.880 DPI Paper Formats A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Print Margins Sheet Media Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder Fsdpfxopitkre Alqopg

Condition: excellent (used), machine/vehicle number: 12991843, Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Fsdpfjic N Epox Alqepg Print Modes: Draft, Letter, Executive Documentation

Condition: excellent (used), machine/vehicle number: 9056423, WITH COLOR RIBBONS Config. No.: 096-104-00404 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Fedpfevf Ifaox Alqopg Ribbon width: 0.79”/20mm– 3.4”/87mm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: V9042700001, Power: Colour / Mono: 65ppm, A4 Counter: Color total: 1,262,651 // BW total: 753,781 Format (cm): max. 45 x 32 SRA3 Gramatur (gr / m2) : up to 300 Resolution: 1200 x 4800 dpi Colour : 4 colours Fsdpsu Egzqsfx Alqopg Equipment / Additional information: The machine can make brochures, staple and fold.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 43000129, Counter: 61 Mil. Clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm with Donaldson Ultrafilter Fsdpfsphpupox Alqjpg Very good condition / tested, checked, cleaned, dismantled & secured by a specialist.

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: TA-2004/251, (Printing, copying, scanning) with brochure finisher Power : Color: up to 50 pages / min. in A4 Black: up to 65 pages / min. in A4 Paper Size: Trays 1-2: Size: Custom to A3 Tray 3: Format: A4; Tray 4: Format: A4 Fpsdpfx Asxb U S Ielqog Bypass Tray (Tray 5): Size: Custom up to SRA3 and 13 x 19 inches Paper Weight: Trays 1-2: Paper Weight: 64 to 220 g / m2; Bypass Tray (Tray 5): Paper weight: up to 300 g / m2 Duplex: Yes (1-1, 1-2, 2-2, 2-1) Document feeder: Duplex document feeder for 250 sheets Print volume: Max. 200,000 pages per month Equipment / Additional information: With RIP Copying Copy resolution: 2400 x 2400 dpi Reduce / Enlarge: 25% - 400% Printing Technology: laser printer Print resolution: 2400 x 2400 dpi 2-sided: standard Scanning Scan resolution: 200 x 200 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi Electrical connection: 230 V, 50/60 Hz

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: G366J310535, Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, Fpsdexuhw Rspfx Alqog detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance

Condition: new, functionality: fully functional, machine/vehicle number: PKG-F4-WSVC-BASIC, Year of construction: 2024, total length: 500 mm, total height: 400 mm, total width: 500 mm, type of input current: AC, overall weight: 20 kg, input voltage: 230 V, Formlabs Form 4 SLS/Resin 3D Printer – NEW & Original Packaging (Year of Manufacture 2024) incl. comprehensive accessories For sale is our as-new, unused Formlabs Form 4 3D printer, purchased in December 2024. The unit is still in its original packaging and has never been operated. This printer is ideal for high-precision prototypes, functional components, and industrial applications, offering the renowned quality and reliability of Formlabs. 🔧 Scope of delivery (complete & new): - Form 4 Resin Tank - Form 4 Mixer - Form 4 Build Platform - Form 4 Finish Kit - Rigid 10K Resin (Form 4) – 2 liters 📌 Condition: - New, unused - Original packaging present - Available immediately 💡 Highlights: - High-resolution industrial 3D printing - Excellent surface finish - Ideal for engineering applications (e.g., with Rigid 10K Resin) - Plug-and-play system 🚚 Miscellaneous: Fpodoy H Eyvopfx Alqsg - Inspection/viewing by appointment possible - Shipping or collection available

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 1,200 mm, total height: 1,550 mm, total width: 1,138 mm, overall weight: 350 kg, input voltage: 220 V, nozzle diameter: 3 mm, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, power: 5 kW (6.80 HP), space requirement length: 1,200 mm, space requirement height: 1,550 mm, space requirement width: 1,138 mm, Equipment: compressor, INONE3D FGF800 (WXF-FGF800) – Industrial Fully Enclosed FGF 3D Printer The INONE3D FGF800 is a next-generation industrial 3D printer for 2025, developed for Fused Granulate Fabrication (FGF) and designed to provide cost-effective, large-format printing directly from plastic granules. This solution is ideal for manufacturing large prototypes, technical components, molds, and functional parts where reduced material costs and high productivity are key. The machine features a fully enclosed housing, which improves process reliability, increases operator safety, and ensures a more stable printing environment. With a generous 800 × 800 × 800 mm build volume, support for 1–5 mm plastic granules, and interchangeable nozzles (0.6–3.0 mm), the FGF800 is suitable for both high-speed, large-volume production as well as applications requiring higher detail. Technical Specifications: - Printing Technology: Fused Granulate Fabrication (FGF) - Model: WXF-FGF800 - Build Volume: 800 × 800 × 800 mm - Nozzle Diameter: 0.6–3.0 mm - Granule Size: 1–5 mm - Maximum Power Consumption: 5 kW - Power Supply: 220 V - Net Weight: 350 kg - Machine Dimensions: 1200 × 1138 × 1550 mm - Year of Manufacture: 2025 - Warranty: 12 months - Design: Fully enclosed industrial 3D printer - Availability: 2 units in stock Fsdpjyv Edaefx Alqspg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT Fpsdsyvhwispfx Alqjg - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. Fjdpjy Hmhhsfx Alqjpg All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Fpodewwg N Tjpfx Alqeg Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: used, Year of construction: 2019, product width (max.): 530 mm, roll diameter: 1,000 mm, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Manufacturer: OMET S.r.l. Model: X6 530 Serial Number: 2188 Year of Construction: 2019 Fodpfx Asyfh Aiolqjpg Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: X7QP000006, paper width (max.): 1,620 mm, Epson SureColor SC-R5010L wide-format resin inkjet printer in good working condition, available for immediate sale. Key Details (from machine label & display): Model: SC-R5010L / K391A Serial No.: X7QP000006 Power: 200–240V / 50–60Hz (European spec, CE certified) Operation Report (as shown on screen): Total Print Area: 38,231.59 m² Total Media Feed Length: 33,162.7 m Total Carriage Pass: 4,060,051 Printer Features: UltraChrome RS resin ink system (6 colours + Optimizer + Maintenance Liquid) Fpjdpoytrfdefx Alqog Dual bulk ink unit (2 × 1.5L pouches with hot-swap function) PrecisionCore Micro TFP printhead 64" (162 cm) print width Odourless, water-based resin ink – suitable for vinyl, banner, textile, canvas, wallpaper, film Immediate lamination capability LCD touchscreen control panel Nozzle check printed on date of listing (11.03.2026) – all colour channels firing Included: Printer main unit with bulk ink system Auto take-up reel system All ink channels present Extra inks that we have in-house The printer is located on a pallet. Inspection welcome. Suitable for signage, wide-format print shops, wallpaper and production environments.

Condition: used, This listing is for the Sartorius YDP30 Thermo Direct Printer The unit is in full working condition and is ready for immediate use Overview & Compatibility Designed to work seamlessly with Sartorius laboratory balances (Practum®, Quintix®, Secura®, MA37, MA160) — it auto-detects the printer and guides users through GLP-compliant print protocols for traceability and accuracy Supports both direct thermal printing (where the paper darkens directly) and thermal transfer printing (which uses a ribbon for more durable, fade-resistant printouts) Certified Scale Print Capabilities Resolution: 203 dpi for clear text and barcodes Scales Galore Max print width: 54 mm (2.13") — fits both standard A4-style lab reports and narrow self-adhesive labels Fpodpexhfy Nofx Alqeg Label options: On-demand printing of standard paper, continuous rolls, or adhesive labels using compatible ribbons

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 503,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. Fsdsxuid Sspfx Alqjpg We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320

Condition: good (used), 3DGENCE Type: Industry F420 Fpodpst I Dm Iofx Alqeg Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Fjdpjux Sfzefx Alqspg Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Fedsk Abllopfx Alqjpg Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. Fodpovmdw Iefx Alqopg The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories are original EOS parts → perfectly matched system Fpsdpoy El Anofx Alqsg _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Condition: repair required (used), functionality: not functional, Year of construction: 2019, System is offered as defective. The Vida is a cost-effective, low-maintenance and user-friendly premium 3D printer for a wide range of professional and medical applications. Fjdpfx Alsrq Ic Eeqopg It has a high-resolution 1920 x 1080 pixel projector with individualized UV optics. This creates an exceptionally fine surface structure. Compared to competing technologies, this enables almost seamless results. In addition, an impressive range of materials can be used to cover dental, orthodontic and auditory applications.

Condition: new, Year of construction: 2025, functionality: fully functional, StarJet UV flatbed printer 2513 Ultra, Ricoh GEN6 printhads, 4-8pcs, LINEAR maglev levitation motor, highest precison Fsdpfoy D Nlkjx Alqspg Photoprint softwre, WARRANTY Service