Used Feeler Ftc 350 Lmc for sale (6,242)

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Lasdpfxezp Edwe Abzsg Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: ready for operation (used), functionality: fully functional, Metal bandsaw MHD MOD 350, operational Condition: operational Location: West Saxony Price: upon request Technical data: Lodozylw Sjpfx Abzeag MHD Werkzeugmaschinen, 09221 Adorf near Chemnitz Type: MOD 350 Further technical data (cutting range, motor power, band speed) not documented Equipment: Material support/roller conveyor for long stock available Coolant supply Control panel with switches and pressure gauge Description: For sale is a used metal bandsaw MHD MOD 350. The machine is operational and equipped with a material support (roller conveyor) for longer workpieces and a coolant supply. Further technical data (year of manufacture, precise cutting range) are not documented. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: negotiable, starting at €1,500 Other machines available from site liquidation Site takeover negotiable

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Lasdpozx D Hpjfx Abzjg Hot runner system: 6x Without conveyor belt

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter Technical Specification Lodpfx Ajzx A Ilebzsag Counter Spindle No Driven Tools Yes

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Equipment and features: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Laedpozy Hktjfx Abzeg Technical details can be found in the attached PDF document.

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Lajdpfx Abezwxhxszsg Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Ljdpfx Abozdddyezsag Weight: 1500 kg Stock number: 1143

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Ledpfxszy Ixle Abzeag Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2022, condition: used, Cutting capacity at 60° right round/square/rectangular: 160mm/150mm/150mm×270mm, max. miter range left/right: 60°, saw blade dimensions X/Y/Z: 4250mm/34mm/1.1mm, max. blade speed: 100m/min, max. vise opening: 450mm, saw blade motor: 2.2kW, working height: 845mm. Machine dimensions X/Y/Z: approx. 1400mm/2000mm/2180mm, weight: approx. 990kg. Including micro-spray system and roller conveyor. Documentation available. An on-site inspection is possible. Lodpszxhlpefx Abzeag

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Weight: 1.450 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 Lajdpfxsyvh Rvs Abzeg - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total width: 2,600 mm, total height: 1,900 mm, Colour: White Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Year: 1998 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 Ledsxlthiepfx Abzjag - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2019, total height: 2,110 mm, total width: 1,413 mm, overall weight: 640 kg, product length (max.): 1,413 mm, number of axes: 6, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information • Robot is completely new and never used • Robotics and Control Unit • Max. payload: 15 kg • Working range: 0–4500 mm • Digital inputs/outputs: 16 • Serial interface: Yes • CAN bus: Yes • USB interfaces: 2 • Flash memory: 8 GB • Buffer module: 24 V • Expandable to up to 12 axes • Welding Technology Power source: Included • Welding interface: Integrated • Welding and function test: Included • Torch cleaning: CMR-8-C torch cleaning device • upright Robotic welding torch: Included • Sensors Tactile sensor: Yes • Arc sensor: Included Technical Data of Workpiece Positioner • Load capacity: 10 kN • Nominal torque: max. 1600 Nm • Tilting moment: max. 8800 Nm Ledpfxex D Hdhe Abzjag • Mass moment of inertia: 900 kgm² • Rotation range: +,- 360° • Swivel range: 370° • Welding Fume Extraction capacity: 3000 - 4320 m³/h • Motor power: 5.5 kW • Connection voltage: 3 x 400V/50 Hz • Noise level: 65 dB(A) • Weight: 640 kg • Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: used, functionality: fully functional, ADJUSTABLE ANGLE BEVELER 250x4, FCT SC-250, USED 'CE'. Refurbished, ready in stock. Lsdpfxezh E Ite Abzsag

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Ledpfsm Rhdyex Abzoag

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of construction: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out on-site, air and foam-free. Maximum temperature: 50°C Ljdpfx Abjzwccmezjag Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Maximum operating volume: approx. 4.58 m3 Minimum operating volume: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge removal: Fully automatic, with consistent consistency The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration is carried out via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: Annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, Sedimentation and flotation tank with fully automatic sludge removal. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated in the scraper tank at the rear. Oil-tight welded, with internal circumferential ring gear, various cover plates (non-walkable plates screwed onto angle frames), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 22926

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. • Model: Concept 350 – 3200 Lsdozug Stepfx Abzsag • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw Lasdpfxozuhfhs Abzeg • Anti-kickback device for multi-rip saw

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. Laodpfx Abeza Smnozog €1,000 (excluding VAT). No delivery; must be picked up at the workshop.

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Lajdpfx Aezy Euwjbzeg Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Lasdpfozzqmnox Abzeg

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Lodpfxezvghke Abzeag

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Lasdpezxqxfofx Abzsg The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is a Cloos Romat 350, including a Cloos workpiece positioning system, model WPEK-DP-KP-10 kN -HD. Ljdpfx Aszwfmujbzeag - Electrical power of the ROMAT 350 = 22.5 kVA - Model series = ROT. II - G

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. serial number 90/52901/12, Oct 1990. With large amount of tooling as shown in images below. Ledpfx Abezh Rf Dszoag

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: Laedpfx Ajzlbpbebzog The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...