Used Faymonville Semi Low Loader for sale (19,261)

Condition: used, Year of construction: 2014, Please contact Theo Lelie for more information Faymonville Mega Z-5H+3L-V-AT-A Lowbed Bj 2014, Bj 2006 3 axle dolly (bj 2014) Airsuspension SAF axles First axle is a liftaxle Last axle positive steert Low Bed (bj 2014) Length 6.410 mm + 3.700 mm extendible Width 3.000 mm + Side extensions 3.500 mm 5 axle (bj 2006) Hydraulic Suspension All 5 axles hydraulic steert Extra remote steering Excavator trough Width 2.750 mm Nsdpfx Asxu Uxzjf Selg With 80 km/h Kingpin 30 ton 3 axle Dolly 36 ton 5 axle trailer 60 ton Total 125 ton With 30 km/h Kingpin 30 ton 3 axle Dolly 39 ton 5 axle trailer 65 ton Total 134 ton

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) Nljdpfx Aozz Ei Rsf Ssg * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Nlodpolthgujfx Af Sjg Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2000, loading space length: 18,100 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 18,100 mm, total width: 2,500 mm, total height: 900 mm, color: other, Year of construction: 2000, Equipment: crane, Structure Construction year: 2009 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Meter capacity: 15 m Capacity kilo: 5700 kg = More information = Axle configuration Rear axle 1: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 2: Double wheels; Max. axle load: 9000 kg; Steering Rear axle 3: Double wheels; Max. axle load: 9000 kg; Steering Weights Empty weight: 9.950 kg Carrying capacity: 29.050 kg GVW: 39.000 kg Functional Crane: PALFINGER 17502, year of manufacture 2009, behind the cab Make of bodywork: PALFINGER 17502 Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Nodpsyx Iv Rjfx Af Sjlg Identification Registration number: OR-33-ND = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, overall weight: 34,000 kg, axle configuration: > 3 axles, first registration: 02/1998, loading space length: 13,000 mm, loading space width: 2,550 mm, Equipment: ABS, Nooteboom MC0-73-04V Low-loader with Steering Axle For inquiries: 0726698 * Permissible total weight: 34,000 kg * Tare weight: 17,220 kg * ABS * EBS * 4-axle air suspension with hydraulic steering * Hydraulic loading ramp Nledjzu Ubcjpfx Af Seg * SAF axles Dimensions (loading area/platform) Length of low bed: 9,100 mm + platform/gooseneck: 3,900 mm Tires: 1st axle: 245 / 70 R 17.5, 20% air-sprung, steering axle 2nd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 3rd axle: 245 / 70 R 17.5, 40% air-sprung, steering axle 4th axle: 245 / 70 R 17.5, 35% air-sprung, steering axle ----Price: 21,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ??? Typographical errors, errors and prior sale excepted.

Condition: used, maximum load weight: 36,540 kg, overall weight: 48,500 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 09/2028, Year of construction: 2020, Equipment: ABS, Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova German Langendorf SATÜ 30-10.0 M Low-Loader | 3 Axles | Wheel Recesses | 36,540 kg Payload For sale is a used Langendorf SATÜ 30-10.0 M low-loader from 2020. The semi-trailer features wheel recesses, remote control and three axles, two of which are steered and one is liftable. With a 10,000 mm long loading platform and a technical payload of 36,540 kg, the low-loader is ideally suited for the transport of construction machinery, wheel loaders, excavators and other heavy equipment. Technical data: * Manufacturer/Model: Langendorf SATÜ 30-10.0 M * Vehicle type: Low-loader * First registration: 06/2020 Nlsdpfxoy A Uxas Af Seg * Year of manufacture: 2020 * Axles: 3 * Two steered axles * One lift axle * Overall length: 13,900 mm * Loading platform length: 10,000 mm * Technically permissible gross weight: 48,500 kg * Tare weight: 11,960 kg * Payload: 36,540 kg * Wheel recesses * Remote control * MOT: New * Vehicle number: G400133 * Condition: Used * German vehicle Inspection is possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number: G400133 * Purchase price: €54,900.00 * Down payment: 10% * Term: 60 * Monthly rate: €849.02 * Residual value: €10,380.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 06/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, total length: 11,000 mm, total width: 2,550 mm, suspension: air, tire size: 265/70/19.5, color: blue, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 265/70/19.5; twin tyres; lift axle; max. axle load: 10,000 kg; steered Rear axle 2: Tyre size: 265/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Rear axle 3: Tyre size: 165/70/19.5; twin tyres; max. axle load: 10,000 kg; steered Weights Unladen weight: 12,000 kg Payload: 36,000 kg Gross vehicle weight: 48,000 kg Functional Loading platform height: 95 cm Condition Technical condition: very good Visual condition: very good EMTECH 3-AXLE LOWBED TRAILER SAF AXLES TRIDEC STEERING SYSTEM AIR-SUSPENDED, STEERED Nodpfx Ajwifrdef Sjlg 1 AXLE IS LIFT AXLE 10,000 KG PER AXLE TECHNICALLY PERMISSIBLE GROSS WEIGHT 48,000 KG TYRE SIZE 265/70 R19.5 LOADING PLATFORM LENGTH 700 CM EXTENDABLE 515 CM LOADING PLATFORM WIDTH 255 CM LOADING PLATFORM HEIGHT +/- 95 CM LASHING EYES AND STAKE POCKETS

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) Nsdpfjzvt Tyjx Af Sjlg * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Nledpfezqiitex Af Sog Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets Nljdpfx Afew Ii A Ae Seg MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm Nljdpfow Nlzqjx Af Seg * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: used, maximum load weight: 31,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, total width: 2,550 mm, Equipment: ABS, Meusburger MPG-3 Low-loader, flatbed with steering/lift axle, hydraulic ramp Equipment: Air suspension * Axle weighing system * 1st axle: lift axle * 3rd axle: steered * Hydraulic ramp with additional supports and remote control * Through-type ramp * Electric winch with remote control * Edscha cover * Storage boxes on both sides * Spare wheel in driving condition * Additional spotlights * Extendable overwidth signs Nlodswfwd Dopfx Af Seg Safety: ABS * EBS * Disc brakes Errors and prior sale excepted. Internal vehicle number: 8303

Condition: good (used), Manufacturer: SCHEUERLE Type: PYK 110 8 0 Towing capacity: approx. 130 t Nedjyb R H Nepfx Af Selg Machine weight: approx. 96 t / Total approx. 130 t

Condition: used, maximum load weight: 33,525 kg, overall weight: 46,000 kg, axle configuration: > 3 axles, first registration: 04/2008, Year of construction: 2008, Equipment: ABS, Manufacturer Kel-Berg / Faymonville Model 4 akslet 3 m Udtræks Maskintrailer Year 2008 Condition Good Serial Number SKBE58S407KE12547 Ref. nr. 7972 Reg. date: 30-04-2008 Drum brake: ? ABS: ? Rear axles: SO F Nljdpfsxa Tdmox Af Ssg Suspension: Air Tire Size: 235/75R17,5 Cover% left 30-50% Toolbox: ? Total weight: 46000 Kg Net weight: 12575 Kg Load capacity 33425 Kg Inside length: 8.75m / 12.10m Extraction: 3 m Forced steering axles: 3+4 Hydraulic ramps: ? Hydraulic rear support leg: ?

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 3,110 mm, total length: 14,200 mm, total width: 2,580 mm, total height: 4,100 mm, suspension: air, tire size: 305/65R17,5, color: other, Year of construction: 2006, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Lifting Roof - Tail Lift = Notes = Number of axles: 4, Unladen weight: 11,480 kg, Gross weight: 48,600 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inches, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2006, Lifting roof, Sliding roof, Low-loader type: Semi low-loader, Loading area length: 995 cm, Gooseneck length: 365 cm, Axle platform length: 315 cm, Axle brand: BPW, Tail lift, Tail lift type: Rear flap, Tail lift material: Steel, Battery for ramp, SEMI WITH CURTAINS / BIG HYDRAULIC RAMP / LAST TWO AXLES STEERED = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tyre size: 305/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Lift axle; Tyre tread depth left inner: 10 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 9 mm; Tyre tread depth right outer: 9 mm Axle 2: Twin tyres; Tyre tread depth left inner: 6 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 11 mm; Tyre tread depth right outer: 11 mm Axle 3: Twin tyres; Steered; Tyre tread depth left inner: 10 mm; Tyre tread depth left outer: 9 mm; Tyre tread depth right inner: 8 mm; Tyre tread depth right outer: 9 mm Axle 4: Twin tyres; Steered; Tyre tread depth left inner: 6 mm; Tyre tread depth left outer: 7 mm; Tyre tread depth right inner: 7 mm; Tyre tread depth right outer: 8 mm Weights Unladen weight: 11,480 kg Payload: 37,120 kg Gross vehicle weight (GVW): 48,600 kg Functional Tail lift: Rear flap o Sliding roof: Yes Environmental Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, model years, and price ranges. Nljdpfx Afjzt Ifxe Sjg Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognisable quality • Good prices • Reliable business practices • Multilingual staff • We understand our customers • Import and transport support • (Export) registration plates quickly arranged • Professional technical services • The safety of “recognisable quality” • And much more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask directly about our European warranty package.

Condition: used, maximum load weight: 16,300 kg, overall weight: 22,000 kg, axle configuration: 1 axle, first registration: 08/2022, next inspection (TÜV): 09/2026, BPW 10-ton axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading area length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable, 25,000 kg, pneumatic valve for adjusting the No. 4 wheel chocks, electric winch with remote control, 3x2 tie-down points in the platform outer frame (8 tons), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers for the loading platform, extendable bumper, ramp holder. Nodpfsih E Hyox Af Selg

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Nledpfezlmkwsx Af Ssg Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, empty load weight: 12,360 kg, maximum load weight: 32,640 kg, first registration: 11/2010, next inspection (TÜV): 09/2024, total length: 20,000 mm, total width: 25,500 mm, total height: 7,000 mm, suspension: air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,035 mm, front tire size: 245/70 R 17.5 /10mm, operation weight: 45,000 kg,

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/2012, suspension: air, tire size: 265/70R19.5, color: grey, Year of construction: 2012, Axle configuration Tyre size: 265/70R19.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Double wheels; Max. axle load: 10000 kg Rear axle 2: Double wheels; Max. axle load: 10000 kg Weights Empty weight: 8.110 kg Carrying capacity: 27.890 kg GVW: 36.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = Njdpfx Afsyyzpto Solg - Air suspension - EBS - Extandable

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles Nlsdpfoyq A D Esx Af Sjg * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Load capacity: 100,250 kg Weights: King-pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Brand Axles: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Nedpfxjuu E Tie Af Sjlg Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information NATO plug Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information Year of construction: 2024 Axle configuration Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steerable; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Weights Empty weight: 33,750 kg Load capacity: 100,250 kg GVW: 134,000 kg Functional Loading platform height: 105 cm Extendable platform: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: used, maximum load weight: 31,300 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 01/2024, total length: 13,110 mm, total width: 2,550 mm, Equipment: ABS, DOLL panther T2E-S3FS21 | 2-axle lowboy | Telescopic | hydraulic forced steering For sale is a DOLL panther T2E-S3FS21 2-axle telescopic lowboy semi-trailer with a hydraulically extendable gooseneck and hydraulic forced steering. Vehicle data: First registration: 2024 * Permissible total weight: 45,000 kg at 80 km/h * Technical payload: approx. 31,300 kg * Tare weight: approx. 13,700 kg * Color: RAL 9005 deep black * Chassis number: W09T2E224P0D46351 Dimensions: Overall length: 13,110 mm * Overall train length: 16,500 mm Nlsdpfezt D Snox Af Ssg * Lowboy bed: 6,700 mm * Telescopic extension by an additional 5,660 mm * Lowboy bed width: 2,550 mm * Fifth wheel height: 1,240 mm * Loading height, lowboy bed loaded: approx. 300 mm * Up to §70: Total weight up to 56,250 kg / Payload up to 42,550 kg Equipment: 2-axle panther axle system * Hydraulic forced steering * Steering angle up to 55° * 12-ton axles * BPW brake with ECO hub system * WABCO EBS-E with ABS and RSS * Hydraulic suspension * Hydraulically extendable gooseneck * 2" kingpin, 21-ton version * Extendable flatbed * 45 mm hardwood floor * Loading ramps * Excavator bucket at the rear * Stainless steel toolbox * Preparation for container locking Control / Technology: DOLL Tronic CAN-bus control system * DOLL control display * DOLL connect wireless remote control * Electronic single-lane operation DOLL connect EEP * Weighing system for rear axle load * Tire pressure and temperature monitoring OptiTire * Auxiliary steering * BekaMax central lubrication system Tires / Lighting: Continental 245/70 R17.5 * M+S / 3PMSF * Spare wheel * LED lighting * LED work lights * LED warning lights * Telescopic warning signs with LED marker lights The trailer is extensively equipped and is particularly suitable for the transport of construction machinery, industrial machinery, and heavy loads. Errors, changes, and prior sale are subject to change. We are happy to provide further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1991, loading space length: 9,150 mm, loading space width: 2,500 mm, loading space height: 2,990 mm, total length: 13,700 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 265/70 R19.5, wheelbase: 9,110 mm, color: other, Year of construction: 1991, Equipment: tail-lift, Tailgate Plateau length: 510 cm = More information = Axle configuration Tyre size: 265/70 R19.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg Rear axle 2: Double wheels; Max. axle load: 9000 kg Rear axle 3: Double wheels; Max. axle load: 9000 kg Weights Empty weight: 7.700 kg Carrying capacity: 31.300 kg GVW: 39.000 kg Functional Tail lift: Nooteboom, 35000 kg Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OB-72-PZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages Nljdoyxv Tdepfx Af Seg - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually Njdpfx Aezzhfusf Selg * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with