Used Exhaust Gas Hose Reel for sale (7,434)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: Fgedozu Shyspfx Albsg 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment Fgedpfx Alszuaprobeg 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Fgedpfozxtz Nsx Albeg Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling system and accessories. For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully functional workshop device and features state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. hose set • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 is carried out directly via the back of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for demanding applications in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ Fjdpeyxvwiefx Albogg The device is in a ready-to-use condition. Inspection and test run can be arranged.

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg Fgjdpolb Iv Esfx Albog

Year of construction: 2022, condition: like new (used), functionality: fully functional, 5HL beer brewhouse + fermentation tanks + chiller Complete 5HL brewery set with brewhouse, 4 fermentation tanks, control cabinet and chiller. Ideal for a small brewery or brewpub to brew 500 liters of beer per batch. This set has everything you need to set up your brewery. Unfortunately we had to close down our brewpub and therefor are selling this new set. The selling price is excluding transport, installation and instructions, but we can help with this at an affordable price. This set contains: 500 liter (+25% headspace) mash/kettle tun with direct heating Baltur gas burner BTG-6 50-60HZ 500 liters (+25% headspace) stacked lauter tun and whirlpool tun Smoke exhaust pipes (double wall) Non-slip work platform Sanitary centrifugal pump Sanitary piping Valves and fittings Manual wort cooling station 10L glass wort grant Fjdpfxovxufgo Albegg Single stage 12m2 heat exchanger Pipe filter Wort aeration station 4x: 500L fermentation unitank (working volume 500L / total volume 700L) Chiller Quantor Chilly 35 LT Manufold Brewery instrumental control cabinet Spare parts

Year of construction: 2000, condition: used, Landini Water Pump • Model CU5/A • Output 84 m³ Fsdpfx Alsx S Sgmobsgg • Power 50 HP • Max. pressure 10.4 bar • Not self-priming • Three-point hitch • Suction hose • PTO-driven pump with single impeller for high pressure. Specially suited for small irrigation reels. • Comes with hoses and sprinklers Condition: Used Year of manufacture: 2000

Condition: used, Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum pressure: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, incl. support baskets Filter area: 77.6 m² Filter loading: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring for raising the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/enclosure type: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/Outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascading up to 2 fans up to 37 kW with frequency converter transfer - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hour counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touch display - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluations; rotation monitoring of the rotary valve - 24 V DC supply air/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 lfm of cable - Ducting system including elbows, branch pipes, reducers, PU hoses, machine connections, small parts, and EP dampers for exhaust from 11 woodworking machines 1 HRS as specified - Return air system in accordance with TRGS 553, with changeover damper and fire damper Fjdpfx Alozlbqrjbjgg - Galvanized base frame for container l...

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction 1 x nesting software Asper Win Basic + automatic nesting on the machine control system 10926ä Fgodpfjypdl Iex Albjg Universal gas = enables changing the gas to adjust the cut quality and cutting speed to the material.

Year of construction: 2017, condition: used, A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 5) Hege drying booth, year of manufacture: 2017, ventilation: recirculation mode, heating: pumped hot water, booth dimensions X/Y/Z: approx. 5840mm/4120mm/3000mm. 6) Hege lift/lower station, year of manufacture: 2017, lifting capacity: 980kg, payload: 998kg, lift: approx. 2500mm, lifting speed: approx. 17.4m/min, version for asymmetrical load distribution: 70%/30%. 7) Hand-pushed monorail conveyor, year of manufacture: 2008, extension: 2017, operating mode: manual, load capacity: 400kg/m, max. trolley load: 200kg, max. load bar capacity: 400kg, max. load between the support brackets: 500kg, max. system temperature: 80°C, max. temperature in the area of the lift/lower station: 40°C. Documentation available. An on-site inspection is possible. Fodpfjzwfqtjx Albogg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Fjdpoy Sz Ruofx Albegg Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation Fgjdpfx Ajzubtljlbeg • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, functionality: unexamined, Used Samoa high-pressure oil (reelmaster) hose reel + oil ratio pumps Manufacturer: Samoa Complete with 7 x Samoa air-powered ratio pumps / high-pressure stripped pumps Fgedpfxoxt Ekfe Albeg Complete lot with accessories.

Condition: used, mileage: 696,000 km, power: 440 kW (598.23 HP), first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2019, SCANIA G 440 LB 6x2 4MNA ADR with Steering/Lift Axle, WILLIG Superstructure for Used Oil and Filter Disposal with Tilting Tank !! EXCELLENT CONDITION !! ADR Hazard Classes: FL, EX II, EX II, OX, AT Fgedpfxownz Dte Albog Chassis: • EURO 5 • Displacement: 12,740 cm³ • Engine Power: 324 kW / 440 HP • Axle Configuration: 6x2 • Lift/steering axle (3rd axle) • Retarder • Cruise control • Automatic climate control • Auxiliary heater • OPTICRUISE automated transmission with clutch pedal • Differential lock • TC – Traction control / switchable • Hill start assist • Warning beacons • Exhaust gas recirculation • Multifunction steering wheel • Reversing camera • Airbag • Radio / CD player • Roof hatch • ALU tank: 300 liters • GVW: 26,000 kg (28,000 kg technically possible) • Unladen weight: 13,300 kg • Gross train weight: 12,700 kg! • Wheelbase: 4,600 mm Tyres: • Front axle: 385/65 R22.5 • Rear axle: 315/80 R22.5 • Lift axle: 315/80 R22.5 • Tread depth: 12/13/12/13/12/11/6/6 mm Tank Body WILLIG Type HL 250 • 2-chamber system with filter presses • 2 x discharge racks • Rear loader with 2 arms for 2 containers of 120 / 240 liters each or 1 x 1,100 liters • Arm load capacity: 300 kg • Max. operating pressure rear loader: 110 bar • Tiltable tank body with hydraulic ram • Total volume: 11,000 liters • 3 chambers with level indicator • Chamber 1: 2,000 liters / max. fill: 1,920 liters • Chamber 2: 1,500 liters / max. fill: 1,440 liters • Chamber 3: 7,500 liters / max. fill: 7,200 liters • ALU fittings cabinet • Bottom valves • Vogelsang pump: suction + pumping • Centrifuge • Hydraulic hose reel at rear • Additional central outlets at rear • Control box / operator cabinet rear left • Remote control for tipping and draining + manual control with levers! - German vehicle! - 1 owner from new! - MOT + Safety Inspection: new! - ADR: new! - Tank inspection: new! - Ready for operation! Errors and prior sale excepted! = More information = Price: On request Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: reconditioned (used), functionality: fully functional, overall weight: 131 kg, warranty duration: 6 months, input voltage: 400 V, fuel: electricity, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, HOT WATER PRESSURE WASHER NILFISK 5M-180/800 The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle Fodpfov N Hqvjx Albsgg Fully electric water heating allows work in places where exhaust gas production is not allowed. Brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 180 bar and 800 l / h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Supply voltage [V]: 400 ~3 phases Pressing capacity [l / h]: 740 Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power consumption [kW]: 24 Engine power consumption [kW]: 5 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 131 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower Fsdpfexrgl Isx Albsgg - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged Fedpfx Aljzba Nyebegg High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Year of construction: 2013, condition: good (used), 813 USED Bakery rotary trolley oven 58x78 or 58x98 Koenig Passat OH. We have 3 such ovens. EXTERNAL DIMENSIONS OF THE OVEN (in cm): - width 120 - length 175 + hood 66 - height 252 + exhaust fan 25 EQUIPMENT: - gas burner - 2 trolleys 58x78 We still have about 50 trolleys for these ovens at a price of 150 EUR each. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Fedpfxetrtycs Albogg Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Fgodezaq Ikspfx Albsg Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter Fjdpfx Aljvtzdlsbjgg -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available -Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Fjdpfx Aljzh Em Nobegg Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 178 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 12/18-4S HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1200 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 12/18-4S Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 600 - 1200 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 8.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 178 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Fgjdpfx Alszh D N Nobjg Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, Year of construction: 2008, Plasma cutting system Manufacturer: Kjellberg Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Fedpszn Hp Sofx Albogg Includes hose package and torch Manual gas console 9926ä

Condition: excellent (used), Year of construction: 2023, BINDER VD 56 Vacuum Drying Oven with VD-M 53 Pump Module Manufacturer: BINDER GmbH Type: VD 56 Year of Manufacture: 2023 Machine Type: Vacuum Drying Oven Internal Volume: 55 liters Maximum Temperature: 220 °C Offered is a BINDER VD 56 vacuum drying oven from 2023, including a matching BINDER VD-M 53 pump module and a BINDER VAP 1 vacuum pump. The system is designed for gentle drying of materials under vacuum conditions and is particularly suitable for laboratory, research, development, quality control, and industrial process applications. Technical Data: Manufacturer: BINDER GmbH Model: VD 56 Article Number: 9630-0002 Version: VD056-230V Year of Manufacture: 2023 Internal Volume: 55 l Temperature Range: +9 °C above ambient temperature to +220 °C Heating Time to 100 °C: approx. 80 min Spatial Temperature Deviation at 100 °C: ± 1.2 K Temporal Temperature Deviation at 100 °C: ± 0.1 K Leak Rate: 0.01 bar/h Vacuum Connection: DN 16 Measurement Port: DN 16 Rated Voltage: 200–230 V Mains Frequency: 50/60 Hz Rated Power: 1.4 kW Protection Class: IP20 Made in Germany Pump Module: Manufacturer: BINDER GmbH Type: VD-M 53 Article Number: 8012-1943 Year of Manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current Consumption: 8.0 A Phase: 1N~ Protection Class: IP20 Vacuum Pump: Manufacturer: BINDER GmbH Type: VAP 1 Article Number: 5013-0217 Fedozt R D Rjpfx Albegg Year of Manufacture: 05/2023 Pumping Capacity: 2.0 / 2.2 m³/h Ultimate Pressure: < 7 mbar Voltage: 230 V Frequency: 50/60 Hz Current Consumption: 1.6 / 1.5 A Protection Class: IP40 Dimensions: VD 56 without attachments and connections: Width: approx. 638 mm Depth: approx. 461 mm Height: approx. 815 mm Internal Dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net Device Weight VD 56: approx. 96 kg Maximum Load per Shelf: 20 kg Maximum Total Load: 60 kg Equipment: Digital controller with pressure and temperature display Program-controlled drying monitoring Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measurement port DN 16 Safety glass pane with splinter protection Large viewing window Insert shelf BINDER VD-M 53 pump module BINDER VAP 1 vacuum pump Vacuum and connection hoses Connecting and mounting parts Operating and assembly instructions Further accessories as shown in the pictures Shipping Data: Weight VD 56: approx. 96 kg Due to size and weight, shipping by freight forwarder is required. Condition: Used Year of Manufacture 2023 Optical condition as shown in the pictures Nameplates are present Scope of Delivery: 1 × BINDER VD 56 Vacuum Drying Oven 1 × BINDER VD-M 53 Pump Module / Pump Cabinet 1 × BINDER VAP 1 Vacuum Pump Vacuum and connection hoses Connecting and mounting parts Connection cables Operating and assembly instructions Accessories as shown in the pictures The unit is available for short-term delivery. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, power: 220.65 kW (300.00 HP), first registration: 05/2003, axle configuration: 4x2, color: red, Year of construction: 2003, Aerial Rescue Vehicle Rescue Platform / Work Platform Vema Lift Oy ​ Type: 323TFL-E Maximum Working Height: 32 meters Horizontal Outreach: approx. 21 meters Rotation Angle: 360° continuous ​ Maximum Basket Load: 400 kg Water Line to Basket Water Monitor in Basket Power Connection in Basket ​ Stabilizers: hydraulically operated, fully automatic Control: platform and ground controls (electrohydraulic) Special Features: Compliance certificate according to Machinery Directive 98/37/EEC, including EMC directive. Chassis Manufacturer: Scania Model: P94GB 4x2 NB Drivetrain: 4x2​ Transmission: Manual First Registration: 20/05/2003 Engine Power: 300 hp Additional Equipment Firefighting body with equipment compartment Hose reel and bracket Work lighting Surrounding area illumination Storage boxes for equipment Special Signal System Blue lights Sirene system (Martinshorn or equivalent) Condition & Service The vehicle has been stored exclusively in the fire department’s station and has undergone regular maintenance. Service and safety inspection were performed in April 2025. Complete vehicle and technical documentation is available. Fedpfxswn Hwro Albogg Additional Information The vehicle features additional firefighting-specific equipment and special functions. A detailed list of all equipment, technical specifications, and further documentation is available upon request. All information provided to the best of our knowledge and belief; no guarantee of completeness or accuracy. This advertisement does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!