Used Esab Roundel Welding Device for sale (15,928)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Knjdpfjyqr Sxsx Ahgob

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy Knsdjpy Uzyspfx Ahgsb - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Manufacturer's No. / Year of manufacture approx. 1985 Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch - 2-cycle / 4-cycle welding unit - Water-cooled - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Knjdpedzql Sofx Ahgsb Weight: 250 kg The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Kodpoxf Uw Sofx Ahgonb Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg Knodpsdzqa Hsfx Ahgob In good condition

Year of construction: 2024, condition: new, functionality: fully functional, Professional mobile filter device for extracting welding fumes with a powerful extraction arm Kodpfx Aovnzwzohgsnb Suitable for welding processes MMA MIG MAG TIG plasma cutting Extraction capacity max 2500 m3/h Extraction arm length 3m Motor power 1.1 kW Connection voltage 230 V / 50 Hz Sound pressure level approx. 73 dB(A) Filter area approx. 14 m2 Powder-coated sheet steel housing with wheels and handles. Digital control panel with alarm log, operating hour counter and filter monitoring. The electronic circuit board is separate and protected from the air flow. High-performance fan located downstream of the filter in a separate soundproof compartment. Spark protection filter built into the device as original equipment. A set of activated carbon filters (10 kg) can be used on request, which are particularly required for SOV/VOC, stainless steel and galvanized steel.

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. Kjdpfx Aeg Icfpohgenb The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 1A50129320, wire diameter 1.2 mm Knodpotyq E Nefx Ahgjb weight 216 kg non-copper-plated wire electrode of quality G3Si1 for MAG welding

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled Knodez Dtwrjpfx Ahgjb -Length: 4 m -Connector: 4-pin -Dimensions: 300/300/H70 mm -Weight: 1.7 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m Knedpfxjz Dttmo Ahgeb -Connector: 3-pin -Transport dimensions: 330/330/H60 mm -Weight: 1.7 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 3.8 m Knsdpfx Aoz Dtn Rshgjb -Connector: 3-pin -Dimensions: 300/300/H60 mm -Weight: 1.6 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin Ksdpfx Asz Dtggshgenb -Dimensions: 300/300/H60 mm -Weight: 1.6 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 2-pin -Dimensions: 330/330/H70 mm -Weight: 1.9 kg Knsdpoz Dtd Esfx Ahgsb

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: gas-cooled -Length: 4 m -Connector: 3-pin Ksdpfx Ahsz A T Nfsgsnb -Dimensions: 300/300/H80 mm -Weight: 1.8 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000 Knedporl S Ufefx Ahgeb

Condition: used, Year of construction: 2008, total width: 2,400 mm, total height: 2,500 mm, total length: 8,000 mm, Colour: Grey Empty weight: 8.000 kg Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Offline software, Oxy-fuel cutting - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Knedjz Aipqepfx Ahgob Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, table length 400 mm table width 400 mm table load 250 Kg table diameter 400 mm Knodpfxez Dkywe Ahgeb swivelling range 135 Grad turning speeds 0,2 - 3,0 stufenlos U/min total power requirement 0,3 kW weight of the machine ca. 0,115 t dimensions of the machine ca. 1,2 x 0,8 x 1,5 m Welding turntable with - footswitch - manual tilt/swivel - remote control - infinitely variable speed - machine base frame

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A Knedpjxlr Tdofx Ahgeb can weld 500mm in length voltage: 380v 50 Hz

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Working table 12500x2500 Plasma 3D Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Oxy cutting torches 2pcs Uninstalling and installing is not included and has under the buyer's responsibility. Knodozracyjpfx Ahgeb Machine is available starting from October 2026.

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) Knedpev Uragsfx Ahgob - HF ignition - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Knsdpfjy Ulziex Ahgeb -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Ksdpfezxqa Aex Ahgjnb Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: excellent (used), functionality: fully functional, load capacity: 1,000 kg, 3-axis welding positioner with hydraulic height adjustment, load capacity 1000 kg, remote control. Clamping plate diameter 900 mm, excellent condition. Speed, height, and tilt infinitely adjustable. Height with vertical plate min. 635 mm, with horizontal plate min. 800 mm, height with vertical plate max. 1360 mm, with horizontal plate max. 1500 mm. Kodpsylihyofx Ahgonb

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 Knodpfsyupd Hox Ahgjb - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: good (used), functionality: fully functional, load capacity: 1,500 kg, 3-axis PEMA welding positioner APS 1500 Knodpfx Ahsxxv Rtsgsb - stepless height adjustment - includes handheld remote control - maximum load 15,000 N - 1,500 kg - rotation speed 0.07 - 1.3 rpm - rotation torque 1,000 Nm - hydraulic tilting up to 135° - tilting moment 3,000 N - max welding current 700 A - table diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - connection 3 x 400 V / CEE 16A - weight 730 kg We have several of these tables available