Used Em Machines Monitoring And Control Of Coolant Lubricant (Kss) for sale (98,227)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Nedpfxszx Rz Hs Af Sjlg Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor Njdeyzhlqopfx Af Selg 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL Nodpoq U Tctsfx Af Solg • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg Nodpfx Afjvgwyco Solg

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts -Type: Perflux for the production of grinding wheels Nedpfxjvgw Rne Af Sslg -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm -Weight: 115 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, the Hundegger SC3 Speed-Cut, from 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production program CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis revolving milling head, 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support - Inkjet labeling system Inkjet 4, from the rear - Automatic discharge of small components to the front - Wood storage blocks with rollers after discharge - Control unit for disposal with operating buttons Nedpfxoz Dga Ts Af Selg Upgraded in May 2023 for €8,500: SC 2100 drilling unit 2.2 kW, drilling direction vertical, on the combination support for drilling up to 24 mm 4-sided inkjet labeling system Inkjet 4 CONVEYOR SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL conveyor system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 3900 hours (machine from ongoing operation) Regularly maintained by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH, Reulbacherstraße 18, 36115 Hilders

Year of construction: 2007, operating hours: 11,749 h, condition: used, Empty weight: 9.100 kg Serial number: 17006585 Hours: 11749 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Table size: 1,600 × 550 mm Max. table load: approx. 600 kg Distance table–spindle nose: 160–770 mm Rapid traverse: up to 30,000 mm/min Spindle holder: HSK-A63 Spindle speed: 14,000 rpm Spindle cooling: Active Tool magazine: 46 positions Automatic tool changer: Yes Control: Heidenhain Machine weight: approx. 9100 kg Overall dimensions L×W×H: approx. 3000 × 2200 × 3100 mm Equipped with: Fehlman ATS 160 CNC, Blum P87.0634 laser system, Donaldson oil/mist filer DMC MMA, Fehlmann KM-Anlage HD coolant pump, burn engineering FD 2500-F11 cooling unit, Knoll 300 K-1 scraper belt conveyer Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Nedpfx Aoz Ep Euof Sslg Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, CNC path control, computer, control unit, logic unit Heidenhain Type TNC 415 B / LE 415 B Logic unit LE 415 B, year of manufacture 1999 Item number: 267 223 49 Serial number: 5 667 843 S5 PC serial number: 252 415 01 NC serial number: 259 930-12 Installed modules: - Computer board Type S4, item number: 268 553 01 / serial number: 5 615 221 - PLC graphics Type S3, item number: 257 954 03 / serial number: 5 556 573 A - Control loop board Type G3, item number: 275 705 02 / serial number: 20 232 905 C - Power supply, item number: 236 484 10, serial number: 5 600 157 / S4 Nlodpezfqb Tsfx Af Seg - LE 415 B neutral, item number: 267 223 CC / serial number: 5 618 369 / S4 Housing dimensions L x W x H: 510 x 190 x 415 mm Weight: 11 kg Very good condition - functional guarantee

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Machine type: MS 1700 TWOCOL Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. If you have any questions or require further information, please feel free to send us a message or call us. Nedpsyz T H Hefx Af Sslg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times Nlodpfx Afoykq D Hj Ssg - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. Nsdpfx Afeykq T Uj Sjlg The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2005, condition: used, Empty weight: 22.000 kg Dimensions (LxBxH): 740 x 450 x 400 cm Serial number: 11191 X-axis travel: 2,500 mm Y-axis travel: 1,000 mm Z-axis travel: 770 mm Table size: 3,220 × 1,000 mm Max. table load: approx. 3,000 kg Spindle holder: SK 50 Spindle speed: 20–8,000 rpm Tool magazine: 50 positions Control: Heidenhain iTNC 530 Njdpfsz Ep Ebsx Af Sslg Internal coolant: Yes Chip conveyor: Yes Electronic handwheel: Yes Magnetic clamping plates LxW: 4x 950x600mm Machine weight: 22000 kg Overall dimensions LxWxH: 7400x4500x4000mm Equipped with: paper filter, 2x oil-mist filter, 2x probe receiver, various tooling in the magazine, documents. Online auction of mold making, die manufacturing machine tools (e.g. CNC surface grinding, turning and milling machines FEHLMAN, HEDELIUS, ABA, G+H, SUNNEN, BIGLIA, OKUMA etc.) due to the full plant closure of metal working company location Meusburger Germany GmbH at Viernheim (near Mannheim) in Germany. The online auction opens Thursday 24 September and closes Tuesday 13 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 8 October Pickup day is on: - Monday 19 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Nljdpfoz Dbtzox Af Sjg Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Nlodpfsu Dahnex Af Sog Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Year of construction: 2017, operating hours: 49,222 h, DMG MORI / DECKEL MAHO DMU 210 P – Year of manufacture: 2017 Machine type: 5-axis CNC universal / portal machining center Control system: HEIDENHAIN iTNC 530 HSCI 5-axis simultaneous machining: Yes X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm B-axis: NC swivel milling head C-axis: 360° NC rotary axis NC rotary table: Ø 1,700 mm Max. table load: 8,000 kg Max. workpiece diameter: approx. 2,500 mm Max. workpiece height: approx. 1,460 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Spindle power: approx. 35 kW Max. torque: approx. 119 Nm Tool magazine: 60 tools Automatic tool changer: Yes Njdpfx Aoz E A Ezof Solg Equipment: IKZ – Internal cooling through the spindle KNOLL KSS / coolant system High-pressure coolant supply Workpiece measuring probe Laser tool measurement Tool breakage detection / breakage monitoring Chip conveyor Work area lighting Full enclosure Direct measuring systems 5-sided machining in a single setup Machine weight: approx. 43,000 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Nlsdjy Hp Rrepfx Af Seg Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement. Nlodpfx Afoz E A Dwo Sjg

Condition: excellent (used), Deckel Maho DMC 635V in top condition – few spindle hours (Heidenhain iTNC 530) For sale is a highly precise and excellently maintained Deckel Maho DMC 635V. The machine has very few spindle hours and is in excellent technical and visual condition. Technical data Control: Heidenhain iTNC 530 Travel (X/Y/Z): 635 / 510 / 460 mm Table clamping area: 790 x 560 mm Spindle speed: 20 – 8,000 rpm Feed rate: 0.01 – 10,000 mm/min Rapid traverse: 30 m/min Tool holder: SK40 (DIN 69871) Tool magazine: 20 positions Machine weight: approx. 3,600 kg Equipment & accessories Electronic handwheel Coolant/air blast switchover (M25) Coolant nozzle Machine condition The machine has been technically refurbished by us and is ready for immediate use: The geometry has been completely measured and is verifiably within the manufacturer's tolerance for new machines (geometry protocol included). All hoses have been preventively replaced. The machine has been thoroughly cleaned. Njdpfxjz E A Hrs Af Sjlg An inspection and a detailed test under power are of course possible at our location. Everything from a single source: Baumgärtner CNC GmbH & Co. KG We are a specialist company that focuses on the service, maintenance, overhaul and automation of DMG machines as well as other well-known manufacturers. That is why we will not leave you alone even after the purchase. We will support you! We would also like to offer you the following: Transport and professional installation Installation and commissioning at your location Subsequent maintenance and repair work From machine purchase to ongoing production – you can rely on us. Please contact us for further information or to arrange an inspection appointment.

Condition: used, Year of construction: 2002, machine/vehicle number: 6243, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Base machine / Travel ranges: X-axis machine stand 5,000 mm, Y-axis spindle head slide 2,100 mm, Z-axis spindle head 1,500 mm. Machine stand: Compact, torsion-resistant welded construction with hardened flat guide rails and telescopic steel covers against chips and coolant. Spindle head slide: Cast iron design with hydraulic weight compensation, guided via combined roller/sliding guides. Machine bed: Nlodoz Dvycspfx Af Sog Flat bed design with approximately 1,200 mm guide rail width and roller compact guides for high precision. Automatic universal milling head: CNC-swiveling milling head mounting 340 x 1°, Hirth gearing approximately 125 kN; milling head 180 x 1°, approximately 100 kN; milling spindle with hydromechanical tool quick-change system, clamping force approximately 25 kN; tool mounting SK 50, DIN 69871. Main drive: 37 kW at 100% ED, 53 kW at 40% ED; externally ventilated AC motor, 2-stage gearbox with automatic shifting; speed 22–4,000 1/min. Feed drives: Digital AC single drives; X/Y: 2–12,000 mm/min, Z: 2–15,000 mm/min. Control / Measuring systems: Central operation via Heidenhain TNC 430 M. Direct, non-contact linear measuring systems. Electrical system: EN 60204 / VBG 4, 400/230 V ±10%, 3 phases, 50 Hz, 24 V control voltage; connected load approximately 80 kVA. Control cabinet IP54, main motor IP55. Lubrication: Main gearbox/milling head drive oil circulation lubrication; main spindle grease long-life lubrication; guides/ball screws pulse central lubrication. Coolant: Internal/external coolant supply with paper band filter. Max. 50 l/min at 10 bar or 47 l/min at 16 bar; tank 500 l. Coolant/air switching. Oil cooler for temperature stabilization and increased manufacturing accuracy. Leveling system: Electromechanical via 2 vertical ball screws with separate drives, measuring systems and CNC axes. Work platform: Moving in the X-direction, with CNC control panel; electrically secured door with viewing window. Pick-up station: 10 tools; max. tool weight 25 kg, length 400 mm, Ø 125 mm, with free neighboring spaces Ø 250 mm. Clamping plate: 3,500 x 3,000 mm; T-slots 22 H12 DIN 650, spacing 250 mm; clamping surface accuracy grade 1 DIN 876. CNC rotary table: Clamping surface 1,250 x 1,600 mm / Ø 1,800 mm; Hirth division 360 x 1°; 6 longitudinal slots 22 H12, 2 guide slots 22 H7; T-slot spacing 160 mm; centering sleeve Ø100 H7 x 20 mm; max. 5 1/min; tilting moment 85,000 Nm; tangential moment 120,000 Nm; table load max. 11,500 kg. Additional equipment: Oriented spindle holder 360 x 1°; hinged band chip conveyor for X = 5,000 mm, feed width approximately 350 mm, discharge height approximately 1,250 mm; 3D wireless measuring probe; electronic handwheel HR 410 for 3 axes; pendulum machining for 2 work areas with monitored safety zones; manually movable splash guard. Collision monitoring: Brankamp CMS with piezoelectric strain gauge; if the process limit is exceeded, the axes are braked and the machine is switched off. Paint finish: Machine/control cabinet RAL 7035, milling head/spindle head RAL 5021; DD structural paint, semi-gloss, oil- and alkali-resistant. Power connection: 400 V, 3 phases, 50 Hz, 80 kVA, 160 A slow-blow; compressed air 4–6 bar, connection G 1/4. CE-relevant environmental protection to be provided on site; adapter plates for chip/coolant return are not included. Coordinate data: Y 730.0124. Documentation: Operating manual SHW-UF6L and Heidenhain TNC 430.

Condition: ready for operation (used), Control Techniques SE43401500 SE 22T Commander frequency inverter, serial number 3960768008 / the cover is loose and has minimal damage, see pictures!! Used, in good condition, 100% functional, scope of delivery as shown in the photos. Nlsdszzurzjpfx Af Ssg

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Technical data: - Tool shank: 35 mm Nedpfx Ajzrx Ihef Solg - Clamping length: 65 mm

Year of construction: 2026, operating hours: 1 h, condition: new, URANUS URM-KM60 Industrial Coffee Roasting Machine – 60 kg/batch capacity. Nlsdpfx Aez D Aidef Ssg Professional coffee roasting machine manufactured in Turkey. Designed for consistent and high-quality roasting with precise control of roasting temperature, drum speed and airflow. • Batch capacity: 60 kg • PLC controlled automatic roasting system • Recipe/profile saving and repeat roasting • Adjustable drum speed and airflow • Gas heating system • Stainless steel contact parts • High-capacity cooling tray with powerful cooling fan • Easy operation and maintenance • Suitable for industrial coffee production • Brand new – 2026 production • CE compliant Manufactured by Uranus Roasting Machines in Denizli, Turkey. Worldwide shipping and installation/support available.

Condition: used, Year of construction: 2011, workpiece weight (max.): 3,600 kg, overall weight: 3,600 kg, Equipment: documentation/manual, CNC Tangential Surface Grinder • Manufacturer: MECCANICHE LODI S.r.l. (Italy) • Model: RT 60.35 CNC • Year of commissioning: April 2011 (Purchased new from VFM Machines SA) • Location: Boécourt (JU), Switzerland • Condition: Very good overall condition, first owner. Sold with its original instruction manuals in French and complete technical documentation. Machine certified to comply with CE standards. 📊 Main Technical Specifications (VFM/Lodi Data): • Grinding length: 600 mm • Grinding width (with grinding wheel width): 400 mm • Grinding height from the table: 400 mm Nlsdpez Eru Eofx Af Sjg • Maximum longitudinal travel: 750 mm • Maximum transverse travel: 350 mm • Grinding wheel dimensions: 400 x 50 x 127 mm bore • Table travel speed: 1 to 35 m/min (continuously adjustable, driven by two hydraulic cylinders) • Spindle speed: 1,450 rpm (7.5 kW / 10 HP motor) • Net machine weight (machine only): Approx. 3,600 kg ⚙️ Design & Drive System: • High-rigidity cast iron frame and column, cast iron table with honeycomb structure. • Longitudinal guidance by linear slides (centralized automatic lubrication). • Transverse and vertical guidance by high-precision needle rails. • Transverse and vertical movements driven by precision ball screws and high-performance Yaskawa brushless motors. • Integrated Yaskawa frequency converter for continuous speed adjustment and spindle braking. • Micrometric movements via electronic handwheel. • Air / Oil heat exchanger for the hydraulic unit. 💻 Automation & CNC Cycles: • Electrical cabinet with original CNC control system managing the display of vertical/transverse dimensions. • Complete automatic cycles: programming and management of roughing, finishing, spark machining, and feed rates (minimum step of 0.001 mm). • Automatic dressing device on the grinding wheel head, with integrated automatic compensation for grinding wheel wear. ❌ Peripherals NOT included: • Machine sold WITHOUT its magnetic chuck. A quote is currently being prepared for a new chuck at CHF 3,500. • Machine sold WITHOUT its lubrication/sedimentation tank. (Ideal for a workshop wishing to integrate the machine into its own coolant filtration system or install a specific new magnetic chuck). 💰 Sales Conditions: • Asking price: CHF 15,000 (net) (Price negotiable at the machine) • Type of transaction: Professional sale (Swiss VAT will be added if applicable). • Delivery conditions: EXW / Ex Works (Boécourt, Switzerland). The machine is sold on the ground. Disconnection of fluids and electricity will be carried out by us. Crane operation, loading onto a truck, and transportation are entirely the responsibility and cost of the buyer. • Availability: Immediate. Removal after full payment has been received.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W Nlodpfx Afet Uircj Sog VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained, high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 2 steady rests (small + large), and articulated chip conveyor. Manufacturer: MICROTURN, Origin: Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height: 350 mm Center distance: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / Special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keypad o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 2 fixed steady rests (1 x small, max. inner diameter approx. 220 mm, 1 x large, max. inner diameter approx. 380 mm) • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill Nledpszfqdnofx Af Sog • Coolant system • CE compliant New servo controller FAGOR for the main spindle, repair costs €4,950.00 net. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany