Used Ebaki Trancheuse Horizontale 1 V for sale (92,445)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travels X = 1,450 mm, Y = 700 mm, Z = 550 mm rapid traverse 42 m/min spindle speed range 20 to 14,000 rpm inline spindle with a power of 20.3 kW / 14.5 kW (40/100% load) tool clamping SK40 DIN69871 tool shank according to DIN69872 tool change with a 60-position SK40 magazine (turret with housing and dual gripper) table clamping area 1,760 x 750 mm direct measurement in the X, Y, Z axes Machine is connected and ready for testing. Pgjdpfx Anjylpf Segeu

Condition: good (used), Year of construction: 1990, functionality: fully functional, 1 x Circular saw Eisele VMS 1 Year of manufacture: 1990 With coolant system. In good condition. Psdpfx Anjyluqgsgogu Technical data: Cutting speeds: 40/80 RPM Saw blade diameter max. 280 mm Accessories: 2 x Saw blade 1 x Roller stand The machine can be inspected while powered on.

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Pgsdpfoz Szalex Angju Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW

Condition: used, Year of construction: 2012, Manufacturer: DECKEL MAHO, Type: DMC 1035 V, Year of manufacture: 2012, Serial No. 15425051954, Operating hours: 46,416, Spindle hours: 18,325, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline touchscreen, Tool magazine for 40 tools, SK 40, Travel range X/Y/Z 1,035 x 560 x 510 mm, 3 machine vices, Manufacturer: Roemheld, Type: HILMA NC 125, Jaw width 125 mm each, Chip conveyor, Chip cart Pgsdpez Tlhijfx Angsu +++ ATTENTION! This machine is part of an online auction! +++

Condition: used, Year of construction: 2015, operating hours: 6,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, Well-maintained Fendt 313 Vario / SCR / TMS Good condition, see photos 6,800 hours First owner 19% VAT can be shown Net: €46,000 If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Please, no emails / Due to time constraints, emails can only be processed sporadically, thank you for your understanding! * Vario operation * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * Continuous front windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Passenger seat with automatic seatbelt * Particulate filter (aerosol) * Segmented windshield wipers front * Interior mirror * Work lights * Engine & Transmission * Reversing function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamellar lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control for rear PTO shaft * Hydraulic system Pgjdevn D E Ujpfx Angju * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valves in the rear * Hydraulic valve controls cross control lever, UDK couplings rear * Front axle weight 60 kg * DL hydraulic system / 2-line system * Trailer hitch, height adjustable * Roof white * Body paint in RAL color * Rim paint on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Cabin floor mat * Steering wheel incl. rotary handle * Accessory bracket * Terminal bracket * Mirror bracket * Rearview mirror * Cabin suspension mechanical * Work lights roof front TWINPOWER * Work lights fender * Work lights roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon * Body color RAL 1032 * Rim color RAL 9006 white aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Double-acting hydraulic valve front, 1/1 center right + rear * Additional valve 1/2 rear * Additional valve 1/3 rear * Return flow center right * Upper link CAT 2 (not available) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~ 90% * 1820 mm front track * 1800 mm rear track If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. More offers can be found at: Equipment details were determined using a VIN query; technical errors may occur. Information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale subject to change.

Condition: like new (used), Manufacturer: Siebtechnik Pedpfx Aog Snuhjngogu Type: V 15/20/1 Size: 1.500 x 2.000mm Deck: 1 Included: – Electrical Motor – Springs Overhauled, sandblasted and painted.

Condition: used, Manufacturer: Bosch Rexroth Product series: IndraControl V Type: VDP40.3BIN-D1-NN-MX Part number: R911171444 Device type: Operator panel / HMI Display size: 15 inch TFT Resolution: 1024 × 768 pixels Membrane keypad: Integrated USB interfaces: Available Pgjdpszcgv Nsfx Angju Supply voltage: 24 V DC Degree of protection (front): IP65 Degree of protection (device): IP20 Bosch Rexroth IndraControl V operator panel VDP40.3BIN-D1-NN-MX – R911171444 Used, functionality not tested.

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h Pgedpfxsw A Spvj Angou - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: used, Year of construction: 2021, Format: 0x0 Net Weight: 210 kg Pgsdpfx Asyxqw Rengsu Measurements: (L x W x H) 152 x 76 x 12 Equipment: Mechanical speed: 300 cycles/hour Automatic Registration Mark Sensing 4-Sided Precision Trimming Dynamic Variable Formatting Delicate Media Compatibility Intuitive Control System Operation Mode: Semi-automatic/Automatic sheet feeding with sensor-driven alignment. Maximum Sheet Size (Width or Length): 74.93 cm (29.5 inches). The maximum square sheet size is 61.1 ?? 61.1 cm (24 ?? 24 inches). Minimum Sheet Size: 20.32 ?? 20.32 cm (8 ?? 8 inches). Maximum Diagonal Capability: Untrimmed raw sheet: up to 86.36 cm (34 inches)Trimmed finished sheet: up to 81.28 cm (32 inches) Maximum Cover Thickness: Up to 0.5 mm

Condition: excellent (used), Perlmühle Drais PM 1 RL-V Previously a protected model Grinding container 1.3 l Stirring motor power 2.5 kW with feed pump Overhauled in 2005 In very good condition, directly from production!!! Pjdsk D Ac Eepfx Angegu

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Pgodpfx Aoxqgrxsngsu Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,400 mm, total width: 2,800 mm, total length: 3,600 mm, overall weight: 5,500 kg, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm Podpfjwm Rqajx Angsgu travel -z axis 510 mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, input current: 2 A, type of output current: AC, output voltage: 110 V, Equipment: documentation/manual, 63kVA transformer for sale 3x400V -> 1x110V Manufacturer: Trafó-Print Kft. Type: TZ 63 000 Power: 63kVA Primary: 3x400V Pgodpew Ev Ihjfx Angou Secondary: 1x110V

Condition: used, mileage: 958,238 km, power: 210 kW (285.52 HP), first registration: 12/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü (41+44+1+2 emergency seats), fully air-conditioned (Vehicle 727) First registration: 05.12.2008 958,238 km Engine: 6,374 ccm 210 kW / 286 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 02/2027 Permissible total weight: 19,000 kg, unladen weight: 11,960 kg, payload: 7,040 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 40/60%, rear approximately 40/40% Single door at the front, double door at the rear Driver's cab with door Ramp Fully automatic transmission Microphone 2 x electric and heated mirrors Fully air-conditioned Auxiliary heater + 2nd heater Stop brake 41+44+1+2 emergency seats Emergency exit 12-volt socket Chassis with slight rust 07.02.2024: ECAS height sensor, rear axle, right side, new 03.05.2024: Handbrake valve, new 24.07.2024: Front axle, brake disc + pads, new 13.05.2024: Steering knuckle, front axle, left side, new 24.07.2024: Crankshaft oil seal, transmission side, new 18.09.2024: Upper triangular arm, front axle, right side, new 07.10.2024: Lower triangular arm, front axle, right side, new 08.04.2025: Front axle, left side, 2 x triangular arms + bearings, new Podjz H Ecxopfx Angjgu 22.04.2025: Pressure regulator/air dryer, new 13.05.2025: Belt tensioner + V-belt, air conditioning, new; air conditioning refilled, actuator, flap, roof, right side, new; wheel brake cylinder, rear axle, right side, new 09.07.2025: 2 x condenser fan, new 05.08.2025: Coolant reservoir, new; 2 x alternator, new 12.05.2026: Front axle, right side, air spring, new; rear axle, right side, shock absorber, new + shock absorber mount, new; Haldex valve, overhauled 03.08.2026: Brake caliper, front axle, left side, new Various signs of wear, consistent with age Last inspection on 05.08.2025 at 913,055 km, next inspection at 973,055 km Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, No minimum price – guaranteed sale to the highest bidder! Pedpfx Ans Aa Nhlegjgu Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 tons Stroke rate: 400 strokes/min Material and feed data Sheet width: 180 mm Strip width: 180 mm Feed length: 150 mm Stroke data Stroke: 10–80 mm Control and electrical system Control: KAISER Voltage: 380 V Dimensions Space requirement: approx. 1.85 × 2.70 × 3.00 m EQUIPMENT Original KAISER strip feed, model ZR 18 D

Condition: like new (used), functionality: fully functional, machine/vehicle number: EFR4AOOS, - Brand: Graco - Reference: EFR4AOOS - UPC Code: 755652866732 Podpfoxv Dcrex Angjgu - General Industry - Dosing, mixing, measuring, and electronic control system designed for the precise application of single or two-component materials, SEALANTS AND ADHESIVES - Applications: Beads, encapsulation - Maximum flow rate: 3.4 l/min - Maximum working pressure: 241 bar - 80+80 cc stainless steel bases - Pressure ratio: 1:1 - Maximum fluid temperature: 50°C - Fully serviced second-hand product - 1-year warranty - Shipping or in-store pickup available - 21% VAT NOT included - VAT INCLUDED. VAT refund can be requested if the company is registered in VIES or has a TAX ID - Customs duties and import charges at buyer’s expense (Incoterm: DAP)

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Podpotwzk Defx Angegu Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) Pgsdpfxszii Dbs Angou (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2024, functionality: fully functional, Powder coating plant Rim powder plant Romer Germany Psdpfxeq Ixcte Angjgu

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,300 mm, total width: 2,900 mm, overall weight: 12,000 kg, product length (max.): 4,100 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details. • Required installation space: 5,700 × 4,700 mm • Operating voltage: 400 V • Frequency: 50 Hz • Rated power: 80 kVA • Rated current: 115 A • Compressed air pressure: 6 bar Pjdez S Avujpfx Angjgu • External coolant supply: 40 l/min at 2.3 bar • Chip flushing capacity: 100 l/min at 2.3 bar Additional equipment • Chip conveyor (discharge height: 850 mm)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 30,374 h, travel distance X-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DMG DMC 100 V hi-dyn was manufactured in 2000. It features a high-speed spindle with a maximum speed of 18,000 rpm and a tool changer with 30 positions. The machine is equipped with a robust control unit from DMG and has a power capacity of up to 15 kW. If you are looking to get high-quality machining capabilities, consider the DMG DMC 100 V hi-dyn vertical machining centre we have for sale. Contact us for further details. - Control On Time (Steuerung ein): 23425 h - Machine On Time (Maschine ein): 107121 h- Program Run Time (Programmlauf): 32257 h- Spindle Working Hours (Spindellaufzeit): 30374h - Included: touch probe, various spare parts (filters, wipers, belts, springs) Pgodps Afm N Rsfx Angou Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3520173969, overall weight: 87 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5kW Pjdswq Rt Aspfx Angjgu Max. blower air flow rate: 550 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air flow rate: 500 m3/h Min. air flow rate: 100 m3/h The Fumator Minivac 350D is a reliable and efficient extraction system specifically developed for the removal of smoke, dust, and fumes in industrial work environments. Thanks to its compact design, it can be flexibly used in various production sectors.

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW Pgsdpjhq Rp Hsfx Angeu 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining Pgjdpjdkmihjfx Angsu 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- Pgsdpfx Aoz Sy I Ijngou - Retrofitted with a newer Haas M17.04B control system! - In top condition.