Used Die-Face Pelletizing, Lab for sale (7,198)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction Iedpfxjzfi A As Ahyobc In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Ibodpfjz Rn R Usx Ahysc Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled -Machine completely disassembled and wear parts replaced Ibjdpfoz Rm Swsx Ahysc -Repainted

Year of construction: 2023, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 2,500mm Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm Ijdpfok Scxiex Ahysbc PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Condition: used, Year of construction: 2022, machine/vehicle number: T0616, with CNC control, manufactured by SODICK, type: LN2, travels: X-axis: 350 mm, Y-axis: 250 mm, Z-axis: 270 mm, with automatic tool changer with 4 tool positions, resolution: 0.0001 mm, work table (made of ceramic), size: 600x400 mm, max. workpiece weight: 550 kg, max. electrode weight: 50 kg, dielectric fluid capacity: 400 l, machine dimensions: 2080x1955x2350 mm, machine weight: 3200 kg, with CO2 extinguishing system, operating hours: 1690 h. Isdpfjz Nhtmox Ahyjbc

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Iodjz Ixc Iopfx Ahyobc

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, Aluminum flat belt conveyor 1,600 × 300 mm – NEW from stock (year of manufacture 2021) For sale is a like-new aluminum flat belt conveyor in an industrial design. The conveyor comes from our stock, has not been used in production, and is therefore in very good condition. Thanks to its high-quality aluminum construction and powerful ELVEM geared motor, the conveyor is ideally suited for professional use in production, warehousing, packaging, mechanical engineering, and automation technology. Technical data: Year of manufacture: 2021 Condition: New from stock Conveyor length: 1,600 mm Belt width: 300 mm Robust aluminum profile construction Green PVC conveyor belt with cleats High-quality ELVEM geared motor Ibjdpjzhx Duefx Ahyoc Three-phase connection (400 V) Smooth and low-maintenance operation Application areas: Mechanical engineering Packaging technology Warehousing and conveyor technology Automation Assembly workstations Feeding of workpieces Transport of individual parts, plastic, metal, or packaging components Advantages: ✅ New from stock ✅ Immediately available ✅ Robust industrial quality ✅ Low-maintenance aluminum construction ✅ High-quality industrial geared motor ✅ Compact design ✅ Ready for immediate use An inspection is possible at any time by prior appointment. Scope of delivery: Aluminum flat belt conveyor ELVEM geared motor PVC conveyor belt with cleats Net price, plus 19% VAT.

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market. Iodpfsz N Sfasx Ahyebc

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits Ibjdpfswh Tq Sox Ahyec • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm Isdpsz Suafjfx Ahyobc MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation Iodpfsz H Smwex Ahyobc ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: excellent (used), Year of construction: 2006, operating hours: 8,252 h, functionality: fully functional, The machine is available for viewing at our premises in Semsales. It has been used for prototyping, with very few operating hours. 10-position tool changer. Erowa ITS50 chuck. Ibedey In Dmjpfx Ahysc

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Ijdpfx Ahjzcmansysbc Control system: EROCOM 20 (Heidenhain). Technical data: see data sheets. From a toolmaking department; all documentation available, in good condition.

Condition: used, Year of construction: 2001, operating hours: 17,511 h, functionality: fully functional, machine/vehicle number: 1-5341/641134, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 600 mm, quill stroke: 400 mm, quill diameter: 100 mm, quill travel distance: 400 mm, type of input current: three-phase, distance table to quill: 400 mm, table length: 800 mm, table height: 340 mm, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 320 mm, input voltage: 380 V, overall weight: 2,500 kg, table load: 500 kg, input frequency: 50 Hz, working range: 500 mm, tank capacity: 500 l, input current: 5 A, stroke length: 400 mm, Equipment: documentation/manual, Charmilles Roboform 35P Wire EDM Machine – Year of Manufacture 2001 For sale is a Charmilles Roboform 35P wire EDM machine, manufactured in 2001. The machine is in used condition, commensurate with its age, and is ideally suited for use in tool and mold making, as well as for general EDM applications. Machine Data - Manufacturer: Charmilles - Type: Roboform 35P - Year of Manufacture: 2001 - Machine Type: Wire EDM - Condition: Used - Operation: CNC control with handheld operating device - Work table: 500 x 400 mm - Dimensions (H x L x W): 2400 x 1900 x 1690 mm - Tool changer - Extinguishing system Ibodpfx Ahez Hb Dfoysc TECHNICAL DETAILS Travel (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm The machine can be seen in its entirety in the photos. Please refer to the pictures for the optical condition and equipment.

Condition: excellent (used), Year of construction: 2016, (for processing large plates) Equipment / Additional information: Iedpfxoz Eaa Ns Ahysbc The plates are fixed to the table using a vacuum.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Iedpfxez N Sfms Ahyobc

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Ijdpfx Asz N Sdijhyjbc Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Iodpfx Ahsz I S Svjyjbc Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Ijdezzyhnepfx Ahyjbc Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Year of construction: 2008, operating hours: 2,893 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0390062, Equipment: CE marking, YAWA MW1050 YA – High-Quality Machine in Very Good Condition YAWA MW1050 YA in very good condition, available for sale. This YAWA MW1050 YA has been well maintained and carefully operated throughout its service life. The machine has only been used for a few hours per day on average, making it an attractive opportunity for a buyer looking for a well-preserved and reliable machine. The machine is in very good overall condition and is ready for continued production. It has been operated in a professional production environment and has received regular maintenance and care. Ijdpfx Ahjz Hkm Nsyjbc Machine highlights: Manufacturer: YAWA Model: MW1050 YA Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for immediate continued production Inspection possible by appointment This is an excellent opportunity to acquire a well-maintained YAWA MW1050 YA with relatively low usage and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: used, Year of construction: 1982, functionality: fully functional, Equipment: documentation/manual, ONA Wire Erosion Machines Type D-160 Year 1982 Ijdpfx Asz Ha Ddjhysbc Equipped with 3R System ELESTA Control

Condition: like new (used), Year of construction: 2003, TECHNICAL SPECIFICATIONS X axis travel: 1,500 mm Y axis travel: 750 mm Z axis travel: 500 mm Worktable height: 820 mm Open height (clearance): 920 mm Maximum workpiece weight: 100,000 N Maximum load on head: 4,000 N Tank type: Fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable size: 1,700 x 1,000 mm Usable dielectric height: 620 mm GENERATOR Standard minimum surface finish: VDI = 0 Power: 60 A MACHINE EQUIPPED WITH Generator with 120 A Expert System Fixed worktable 1,700 x 1,000 mm CNC for simultaneous axis control Integrated ONA C-axis with automatic System 3R Macro Standard chuck Eco-friendly filter with automatic cleaning cycle Dielectric temperature control system Year of manufacture: 2003 MACHINE FEATURES Fixed-table structure ensuring stable operating conditions, equipped with leveling supports Stabilized grey cast iron structure (base, column, tables) X-Y-Z movements via high-precision class A ball screws, driven by three DC motors Motion on prismatic roller guideways Position detection via linear glass scales Improved front accessibility with retractable front door system Fixed working tank Integrated C-Axis (mounted on the head) Maximum speed: 40 rpm Resolution: 0.001° Isdpjxwma Aefx Ahysbc Maximum load (static C-axis): 500 N Maximum load (dynamic C-axis): 120 N Heidenhain encoder Toothed belt transmission Maximum current without rotation: 120 A Maximum current with high-speed rotation: 60 A Maximum current with slow rotation (0–1 rpm): 12 A Moment of inertia: 2,000 kg/cm³ GENERATOR FEATURES Modular design Programmable parameters Maximum power: 60 A EXPERT SYSTEM Controls the entire erosion cycle, from roughing to final surface finish, automatically adjusting spark parameters to ensure maximum generator efficiency and highest machining speed. Dedicated software for deep ribs Dedicated software for finishing large homogeneous surfaces Fully unattended machining capability with maximum productivity and excellent final quality Process parameter monitoring via screen and control panel display Automatic anti-collision system preventing electrode damage in case of accidental contact with the workpiece TECHNICAL DATA Pulse duration (Ton): continuously adjustable from 1 to 6,500 microseconds Pulse interval (Toff): continuously adjustable from 1 to 6,500 microseconds Copper electrode volumetric wear: 0.2% Graphite electrode volumetric wear: 0.1% Surface finish Ra (CLA): 0.1 micron – VDI = 0 Maximum material removal rate: 600 mm³/min Power consumption: 10.7 kVA Current intensity: adjustable from 1 to 12 (manually or via program) Highly sensitive servo control system High erosion stability

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: safety light barrier, Offer includes: Polar 115 X, manufactured in 2007, including spare blades and side air tables. Ibjdpfjz Nz Tyex Ahyoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Rotating impact blade Adjustable infeed speed Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement. Iodpez Rmvvjfx Ahysbc

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Iedpfxji Igdfj Ahysbc Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator