Used Crossbeam for sale (284)

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Prjdpev Ha Uisfx Ahcea Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, Electrically Heated 545L Stainless Steel Agitated Tank Type: EBB500RWP Includes operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in different sizes. Volume: 545L Dimensions approx.: Ø 950mm x cylindrical height 880mm Total height: 1120mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: Internal and external IIIc/2B Internal weld seams ground Max. operating temperature: 110°C Max. operating pressure: ATM - Vertical design on four legs with forklift tunnel - Top: Hinged lid, central crossbeam with two hinged lid halves - Bottom: Flat bottom with side outlet DN50 DIN11851 and disk valve - 2x side handles - 1x nameplate Predpow Dy Ddsfx Ahcoa Propeller agitator for low-viscosity media Power: 0.75KW Speed: 1410RPM Operating voltage: 3PH 400V

Condition: good (used), Used stainless steel mixing tank Paste mixer Last use: Chemical industry Item number: 10205 Prodpfsdwktxsx Ahcea Volume: 500L Type: Standing on 3 legs Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Top: Open with crossbeam Bottom: Conical bottom Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 800mm Distance from outlet to bottom: 20mm Overall height: 2060mm Overall width: 1180mm Height of legs: 1290mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Outlet diameter: 60mm Outlet valve: Ball valve Mixer / Paste mixer Power: 3.0KW Speed: 32 RPM Operating voltage: 3PH 400V

Condition: not inspected (used), Mobile portal crane ABUS LPK Year of manufacture: 2011 Machine number: 220-090587 Condition: Uninspected Delivery terms: Free on truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Net price: €2,500 Payment terms: Payment in advance - by bank transfer Internal No.: 174-5 Technical data: Crane bridge / crossbeam: approx. 3,300 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 3,500 mm Predpfezqfuxox Ahcea Length of travel / foot beams: approx. 1,980 mm Height of travel / foot beams incl. rollers: approx. 370 mm Lifting device: ABUS electric chain hoist Type: GM 6 2000.5-2 Load capacity: 2,000 kg Lifting speed: 0.30 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically movable chain hoist / load hook (left/right) Dimensions & weights: Installation dimensions L x W x H approx.: 3500 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ► Upon request, we can offer transport to the destination. ► The quoted price is net, plus VAT. ► The goods are sold with exclusion of all warranties. ► Technical data subject to change without notice. ► Subject to prior sale. ❗The goods are sold exclusively to business customers❗

Condition: not inspected (used), Mobile portal crane ABUS LPK IF INTERESTED, FURTHER IDENTICAL CRANES ARE AVAILABLE! Year of manufacture: 2022 Machine number: 220-251780 Condition: Uninspected Delivery conditions: Free on truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - upon agreement Net price: €6,600 Payment terms: Prepayment - by bank transfer Internal No.: 174-1 Technical data: Crane bridge / crossbeam: approx. 3,600 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 4,600 mm Length of travel/foot beams: approx. 1,980 mm Height of travel/foot beams incl. rollers: approx. 400 mm Lifting device: ABUS electric chain hoist Type: GM 6 2000.3-2 Load capacity: 2,000 kg Lifting speed: 0.80 / 3.00 m/min Power supply: 400 V / 50 Hz Equipment: Electrically operated chain hoist / load hook (left/right) Scope of supply: Existing documentation as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 4600 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: Pjdpfxszqfn Ee Ahcora ► Upon request, we can offer you transport to the desired location. ► The quoted price is net plus VAT. ► The goods are sold with exclusion of all warranties. ► Technical data without guarantee. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 05/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE WITH REAR OPENING, TWO SIDE-HINGED DOORS, 200 MM BEAMS, NEW ROLLER CARRIER CROSSBEAM, AND PARTIALLY RECONDITIONED FLOOR REF: 26-U-61 TYPE: Bulky waste NEW: No LID: No OPENING: Rear, two side-hinged doors DIMENSIONS TOTAL EXTERNAL LENGTH: 6.50 m + 0.20 m EXTERNAL WIDTH OF BODY: 2.50 m FRONT SIDE HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m Predpfx Ajy Sqfzohcsa REAR SIDE HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m SIDE PANEL HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m CAPACITY: 33 m³ WEIGHT: 3,080 kg FLOOR: 4 + 4 mm SIDE WALLS: 3 mm COLOUR: Green All information is provided subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for updated pricing and conditions. For further information: Loris: +39 348 477 3001 URL: #thespecialistsofrolloff AURORA ROLL-OFFS Specializing in the sale and purchase of industrial and commercial vehicles, mainly in the waste management sector. Experts in trucks, trailers, and roll-off equipment. Over 50 trucks and more than 150 bins and containers, with and without roll-off cranes, available for immediate delivery. E.&O.E. Due to the high volume of listings and details, Aurora invites you to confirm the accuracy of the information with our sales team.

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 Pjdeztfbwopfx Ahcera -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, mileage: 100 km, power: 125 kW (169.95 HP), color: blue, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Henschel flatbed truck with aluminum sideboards Pjdpfx Ahozr Twdocera Ladder support behind the cab Dimensions approx. 4,300 x 2,020 mm BA3 Active Brake Assist, C6L Multifunction steering wheel, C6L Multifunction steering wheel, C71 Underrun protection device according to EC regulations, C72 Bumper and corner elements paintable, CB8 Stabilization Level II, CL1 Steering wheel adjustable in inclination and height, CM9 Painted components, pure white MB 9678, CN2 Radiator grille frame in vehicle color, CW2 Omission of vehicle lowering, E07 Hill start assist, E1D digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E2A Take-off for ABH special signals in the cockpit, E3J Pre-installation for switch panel, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, ES0 Jump start assistance Contact, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F49 Heated windshield, F68 Heated and electrically adjustable exterior mirrors, FF5 Storage compartment above the windshield, FG8 Front cup holder, FHS CAB, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FJ5 Folding cover for storage compartments left and right, FQ6 Lockable compartment in storage space above the windshield, FR7 PRE-INSTALLATION ELECTRICAL SYSTEM REVERSING ASSIST, FS1 Mirror holder, extended, GD8 6-speed manual transmission ECO Gear 360, H1I Wide-angle nozzles in the instrument panel, H21 Heat-reflective glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IF3 Chassis with cab, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton truck, J10 Speedometer km/h, J1V Pre-installation for blind spot assist for body builders, J55 Belt warning system for passenger seat, J58 Belt warning system for driver's seat, J65 Outside temperature display, JA8 Crosswind assist, JA9 Traffic sign assist, JB4 Active lane keeping assist, JF1 Rain sensor, JG0 Gear shift indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L07 Outline lights, L72 Electrical system for external superstructure, L76 Rear light wiring harness extended, L94 Omission of parking light, LA2 Headlamp assistant, LB1 Lateral marker lights, LE1 Adaptive brake light, LV6 Pre-installation for electrical system for 3rd brake light, M60 Generator 14 V / 250 A, MJ8 ECO start-stop function, MS1 Cruise control, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, O7L Rear blind spot radar, X to rear axle 300 +/-100 mm, O7P Rear blind spot radar, additional X to rear axle +1000 mm, O94 WIDTH OF SUPERSTRUCTURE OUTER EDGE 2150 MM +/- 50 MM, P47 Front mud flaps, Q11 Longitudinal beam reinforcement, Q18 Rear crossbeam screwed on, RH2 Tires 235/65 R16 C, RM7 Summer tires, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S23 Passenger seat, double seat, S28 Armrest, driver's and passenger's door, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag passenger, SB3 Suspension seat, comfor

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis with wedge-shaped design. Increased point load of approximately 25,000 kg over approximately 5,000 mm. 24,000 kg telescopic support winches with load and fast-speed settings. Lashing points in 5,000 kg, 6,000 kg, and 10,000 kg versions. 8 stake pockets (for 2 front walls). Aluminum roof rail with sliding cover. Rear stakes extendable to approximately 3,500 mm, for loading and unloading purposes only. Three sliding stakes per side. End stakes extendable laterally in the direction of travel. Front wall designed as a storage area with integrated shelving system, closed on the inside. DINKEL lift roof, mechanically adjustable in height, lift roof height 400 mm, operable on both sides or on one side. Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) with height adjustment in the stakes. Trailer can be driven under tarpaulin up to a total height of approximately 4,400 mm (open at the rear above the loading platform). Upper portal crossbeam with sliding cover, movable. Four rows of stackable 150 mm aluminum slats on the side (only 2 rows of slats in the upper bunk), 450 mm pockets at the bottom, 4 rows of pockets above, even spacing between them. WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV. Air suspension in ECAS version, with lifting and lowering function. Wabco Smart Board with engine load display and lift odometer. 3 x 10,000 kg SAF axles with drum brakes. 3rd axle as a friction-jointed trailing axle. 1st axle can be lifted. Tires 235/75 R 17.5. Dhollandia heavy-duty lift platform type DHLSU, load capacity 9,000 kg, load distance 1,000 mm, steel platform approximately 3,000 x 2,500 mm. Hydraulic additional support, automatic ground leveling. Loading platform with ramp function for inclining the platform, for use as a drive-up ramp, loadable up to a maximum of 13,500 kg. Chassis painted in mb-novagrau. Body painted white. Tarpaulins with customer lettering! Predpfxey Dy Ehs Ahcja

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment Pedpfx Ahjzrr Nfocjra - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Year of construction: 2015, condition: good (used), machine/vehicle number: 8708S008, Technical data: - Load capacity: 7 t Predpfxogi Nudj Ahcoa - 3 variable lifting chains on the ring above the crossbeam: 2000 mm - 3 securing chains with hooks, load capacity each: 5000 kg - 2 x chain length with hooks, approx.: 800 mm - 1 x chain length with hooks and tensioning device, approx.: 2500 mm - 2 x arm length: 750 mm - 1 x arm length: 850 mm - Crossbeam dimensions, approx.: L 1500 x W 1300 mm - Weight with chains, approx.: 200 kg

Year of construction: 2016, condition: good (used), Offer 20599 Technical data: - Load capacity: 10,000 kg - 3 variable lifting chains on the ring above the crossbeam: 2,000 mm - 3 securing chains with hooks, load capacity each: 5,000 kg - 2 x chain length with hooks, approx.: 800 mm Pjdpfsgi N Ixjx Ahcsra - 1 x chain length with hook and tensioning device, approx.: 2,500 mm - 1 x arm length, approx.: 700 mm - 1 x arm length, approx.: 800 mm - 1 x arm length, approx.: 1,100 mm - Crossbeam dimensions, approx.: L 1600 x W 1400 mm - Weight with chains, approx.: 200 kg

Condition: good (used), machine/vehicle number: 827220, Year of construction: 2000, Offer 26095 Technical data: - Load capacity: 5 t - Usable height: 250 mm Prodpfx Ahszik Eajcoa - Overall height: 360 mm - Crossbeam: HEB 180 - 6 double load-bearing hooks on the left and right sides - Overall length: approx. 2570 mm - Overall width: approx. 180 mm - Weight: approx. 170 kg

Condition: used, mileage: 306,127 km, first registration: 10/2013, axle configuration: 4x4, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions Prsdowmn Tlspfx Ahcea • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 7 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW 160 MM BEAMS HOOK AND STANDARD LANES CRADLE  REF.: 25-N-26 OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m REAR CROSSBEAM WIDTH: 1.80 m with two rollers HOOK HEIGHT: 1.47 m / 1.48 m LANES: 1.06 m WEIGHT: 280 kg Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: Prsdpowct Hvsfx Ahcsa #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: good (used), machine/vehicle number: 940957, Year of construction: 1992, Technical data: Podpezqzubofx Ahcsra - Load capacity: 4 t - Usable height: 690 mm - Overall height: 800 mm - Crossbeam support made of steel structural hollow profile: 140 x 140 mm - 3 load-bearing hooks - Grid spacing with 5 holes on the left and right: 200 mm - Overall length (approx.): 2100 mm - Overall width (approx.): 200 mm - Weight (approx.): 130 kg

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location Pjdezqyn Tepfx Ahcjra - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Pedpfx Ahszpw Hdocsra Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: like new (used), Year of construction: 2024, Pallet racking system, Linde / Stow, frame height approx. 10.70m, 850kg / pallet position, approx. 23,108 positions – used: Price ex location: only €489,000 (net), disassembled, packed and loaded! Manufacturer: Stow Supplier: Linde Type: Pallet racking system Year of manufacture: 2024 Frame depth: 1.05m (still to be verified) Field load: max. 12,750kg Load capacity per pallet: 850kg Material list (6 levels): 68 end frames (H = 11,400 mm), complete with spacers, base plates and anchors 1,256 intermediate frames (H = 10,700 mm), complete with spacers, base plates and anchors L = 2,700 mm: 12,340 crossbeams, load capacity per level 2,550kg L = 3,600 mm: 448 crossbeams, load capacity per level 3,400kg 1,142 surrounding upright protectors (H = 400 mm) 60 guard rails (L = 2,400 mm) 60 guard rails (L = 1,100 mm) 280 grid panels (880 x 1,100 mm) for aisles/passageways Condition: good – very good Predpfx Ahezlc Dtjcea Available: immediately (but still needs to be dismantled) Location: Northern Italy

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment Pedpfxezpfa Ss Ahcora - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,603 h, load capacity: 6,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Four-way side loader Mast type: Standard Technical condition: good Prodpfjzn A T Hex Ahcoa Side shifter, Hydraulically extendable side shift, rotatable, Langguth crossbeam, length: 8m.

Condition: good (used), Alzmetall AC 32 Turret Twin-Head Gang Drill An extremely robust and rare twin-head gang drill based on two Alzmetall AC 32 drilling units. This system is a high-quality industrial machine designed for highly efficient serial or progressive machining operations. Instead of standard spindles, this machine is equipped with two separate tool turrets. This enables fully automated machining cycles (e.g., centering, drilling, countersinking, tapping) without the need for manual tool changes. Technical Data & Equipment (per head / entire system): Drilling unit manufacturer: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Pedpfx Ajznic Uehcjra Drilling capacity: max. 32 mm in steel Tapping capacity: max. M 24 / M 30 Tool changer: 2x swiveling multi-station turret heads Machine table: Solid, ground cast-iron table with T-slots for flexible setup Safety: Full enclosure of the working area (safety cabin) with viewing windows for optimal protection against chips and coolant spray Additional features: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy height adjustment of the entire crossbeam You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2020, AKE Technologies Vehicle Shaker System Manufacturer: AKE Technologies GmbH Type: Vehicle Shaker System Year of Manufacture: 2020 For sale is a professional vehicle shaker system for vibration, resonance, and NVH (Noise, Vibration & Harshness) testing. The system is used to perform reproducible vibration and load tests on vehicles, assemblies, and components. The system enables the simulation of vehicle vibrations, road influences, resonances, and noise generation under controlled test conditions. Technical Data Operating voltage: 3 x 400 V AC / 50 Hz Control voltage: 24 V DC Power consumption: approx. 4 kW Compressed air supply: 6 bar Compressed air consumption: approx. 0.3 m³/min Total system weight: approx. 4,000 kg Stroke and positioning system: Approx. 1,000 kg load capacity per stroke table, according to documentation Shaker Data AKE HPS350 High-Power Shaker Frequency range: DC to 3,000 Hz Dynamic force: up to approx. 2.6 kN Static force: approx. 11 kN Stroke: approx. 5.5 mm peak-to-peak Max. velocity: approx. 0.74 m/s Max. acceleration: up to approx. 22 g Natural frequency: approx. 65 Hz Software Vibration Research VibrationVIEW AKE Drive File Manager Activated functions: 8 input channels Sine up to 4900 Hz Random up to 4900 Hz FDR up to 4900 Hz Sine Multichannel Random Multichannel Dual Loop Control Equipment Industrial control cabinet with power electronics Operator computer High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement and sensor technology Operating and emergency stop units Application Areas NVH analyses Vibration tests Resonance investigations Noise analyses Component testing Endurance tests Research and development Condition Used system from industrial application. Optical condition, see pictures. Scope of delivery AKE Shaker System for Vehicles Control and operating system Industrial control cabinet Operator computer Installed test software High-power shaker units Vehicle wheel mounts Stroke and positioning units Lifting columns with crossbeam Measurement, control and connecting cables Documentation and software media Tools and accessories as shown in the pictures Condition Used system from industrial application. The system has been dismantled and stored. Prjdpfxezazm Rs Ahcea Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Important note: All information is provided to the best of our knowledge, based on available documentation, software displays and nameplates. Deviations in technical data are possible. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Original META MULTIPAL S (MULTIPAL-S) pallet racking system / heavy-duty shelving for warehouses, industry, and logistics. With a height of 3.80 m, it is also ideal as a high-bay racking system. 9 frames – 40 crossbeams – Original META MULTIPAL – in top condition The system was used exclusively for storing musical instruments and accessories. As a result, it was only subjected to very low loads. It was well maintained and is overall in exceptionally good condition. The few minor signs of wear do not affect stability or function. The manufacturer, META, has confirmed based on the profile marking and the photos that this is an original META MULTIPAL racking system. Prjdpfxezmu Rue Ahcsa Scope of delivery • 9 × frames, height 3,800 mm • 40 × original META crossbeams • Field width: 3,600 mm • Shelf depth: 800 mm The racking system can be flexibly adapted to different storage requirements. Availability: immediately. Collection by prior appointment. Self-collection: The racking system will be completely dismantled by us and made ready for collection. The buyer is only responsible for loading and transport. There is a level truck access directly to the warehouse, which allows for easy loading. An inspection is possible at any time by prior appointment. Location: 45731 Waltrop Price: €3,990.00 net, negotiable, plus 19% VAT. An invoice with VAT will be issued. Type ID: 757 Type: MULTIPAL-S shelving If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Pjdpfezii Awox Ahcera Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.