Used Cormak Zbiornik Ciśnieniowy 11 Bar 200 L for sale (83,293)

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Pgsdpfx Afjzhpg To Sjt delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Pedpowc Rk Eefx Af Sogt Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz Podpfshf Na Sex Af Sjgt CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg Pgsdpfx Afjpz Sf Ns Sot

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) Psdsyxtfwopfx Af Sjgt ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Pgsdpfeyg Nu Nsx Af Sot

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg Pedpfxot D Apto Af Sjgt We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower L B, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 200-700 bar - Flow rate: 13-42 l/min - Engine: Kohler Stage V Diesel, 35 HP / 26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Dry weight: approx. 260 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance Psdpfxjfdzy Ue Af Segt - Trolley with 4 industrial wheels, 350 mm - Electric starter - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Year of construction: 2023, condition: new, 3 single-screw polyethylene profiles Pgsdpfx Afoy Sxmgs Sot

Condition: reconditioned (used), functionality: fully functional, We offer refurbished turbines from a continuous blasting machine – Rösler RRB 22/5-L. Turbine type: Hurricane H42. The stated price is for 1 unit. Turbines are refurbished using original spare parts made of tool steel. Psdpsztp Alefx Af Sjgt Blasting machine, blasting nozzle, blasting and sanding, sandblasting, blasting, shot blasting turbine.

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank Pgodpfx Afoya Dfis Sjt -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 Pjdpfx Ajzrv Hzjf Sjgt • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers a pressure range of 200 to 2800 bar and a flow rate of 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, which ensures long service life and corrosion resistance. For aesthetic appeal, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet at all four corners, as well as forklift pockets and lifting eyes at all four corners. The machine features a galvanized roof plate with a side bracket for protecting and storing, for example, high-pressure hoses. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 lpm CD200-250 250 bar 250 lpm Pjdehgbhnopfx Af Segt CD200-1000 1000 bar 63 lpm CD200-1380 1380 bar 42 lpm CD200-2500 2500 bar 25 lpm CD200-2800 2800 bar 23 lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optional without ADD blue) Drive engine power: 149.1 kW Drive engine speed: 1950 rpm Tank: 135 L for skid and 200 L for trailer Max. fuel consumption: 18-20 l/h Dimensions and dry weight SKID: 2170mm x 1350mm x 1810 mm (1785 kg) Dimensions and dry weight TRAILER: 3800mm x 1900mm x 2000 mm (2500 kg) Includes standard accessories.

Condition: new, Year of construction: 2026, CORMAK BS150-200 Belt Grinder is an industrial machine designed for intensive operation in manufacturing plants, metalworking workshops, and tool rooms. This metal belt grinder combines high grinding efficiency with an effective dust extraction system, providing safety, cleanliness, and comfort during everyday use. Its robust steel construction and large work table ensure stability and precision even when processing large components. Main advantages of the machine Two belt speeds (15 / 30 m/s) – allows adjustment of the grinding speed to the type of material and the machining process (rough grinding or finishing). Integrated dust extraction system – provides a clean and safe working environment without the need for external extraction units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large work table (480 × 150 mm) – enables comfortable handling of larger workpieces. Stepless grinding angle adjustment – allows precise positioning of the belt according to the processed component. Quick belt replacement system – reduces downtime and improves work efficiency. Design and technology Pgsdevu Uqnjpfx Af Set The stationary CORMAK BS150-200 belt grinder is based on a welded steel frame, providing high rigidity and resistance to dynamic loads. The integrated dust extraction system, equipped with a 0.37 kW motor and two Ø100 mm extraction ports, ensures efficient removal of grinding dust and particles. The main 3.0 kW motor provides sufficient power for demanding machining operations and intensive industrial use. Precision and work efficiency Thanks to the use of a 150 mm wide and 2000 mm long abrasive belt, the machine provides a large contact area, reducing processing time and increasing efficiency. Two operating speeds allow quick switching between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the entire working cycle, improving grinding stability and abrasive belt life. Applications The CORMAK BS150-200 metal belt grinder is used in: manufacturing plants processing steel, stainless steel, and aluminium, welding and metalworking workshops, surface preparation and finishing operations, grinding edges, weld seams, and flat surfaces. Standard equipment Stable steel base with tilt adjustment Abrasive belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection guard Adjustable protective shield Technical specifications Parameter Value Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 15 / 30 m/s Motor speed 1400 / 2800 rpm Main motor power 3.0 kW Dust extraction motor power 0.37 kW Machine dimensions (L × W × H) 1000 × 650 × 1150 mm Weight 117 kg Power supply 400 V Dust extraction ports diameter 2 × Ø100 mm Work table dimensions 480 × 150 mm Chip collection bag diameter Ø320 mm Chip collection bag length 650 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaner PTC CJ-2B, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner… Podpfx Asgigqxjf Sjgt - Operating pressure: 130 bar - Flow rate: 32 l/min - Engine: Honda GX390 gasoline, 8.7 kW - Dimensions: 1160 x 580 x 710 mm - Dry weight: approx. 80 kg - High-pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holder for gun with lance - Pressure gauge - Built-in professional pressure relief valve - Manual stainless steel hose reel with 30 m high-pressure hose 3/8" + 10 m high-pressure hose 3/16" - 2 pieces of 3/8" and 1 piece of 1/8" F pipe cleaning nozzles - Gun with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning unit, ideally suited for cleaning and removing blockages in pipes with diameters from 40 to 200 mm. It is ideal for cleaning and removing blockages in house connections, septic tanks, cisterns, and industrial waste pipes. The powerful Honda engine with an output of 8.7 kW and the Comet TW Premium pump with speed control guarantee the highest performance and reliability over time. This unit provides the optimal solution for professionals seeking an efficient and powerful machine that can handle the most demanding work situations, thanks to its robust steel frame and large pneumatic tires.

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products Pgodjy Nmy Aspfx Af Sjt • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 condition: Very Good condition Available: Immediately

Year of construction: 2020, condition: new, functionality: fully functional, Manufacturer BRINOX Machine designation CIP System CS6720 Model LEP12 – CIP module with insulated buffer tank, 200 L Year of manufacture 2020 Pedpeyl H Htefx Af Sogt Condition New, unused, originally packaged, never installed, never commissioned System type Modular CIP system (Cleaning in Place) on stainless steel frame, fully pre-assembled. Comprising insulated CIP buffer tank, centrifugal pump, heat exchanger, stainless steel piping module, valve technology, measuring and control equipment, as well as media connections. Frame dimensions Approx. 2330 x 1224 x 2127 mm Buffer tank Working volume: 200 liters Total volume: 278 liters Cylindrical design with dished ends according to DIN 28011 Operating pressure: -1 to +3 bar Test pressure: 5.4 bar Permissible temperature: -10 °C to +150 °C Operating temperature: 0 °C to +85 °C Fluid group: 1 Insulation: Glass wool with low chloride content (

Condition: as good as new (ex-display), Year of construction: 2025, new compressed air tank 1000 litres standing, galvanized 11 bar (with fittings) incl. container papers Pedpfx Asv Ak Tnjf Segt Year of construction: 2025 High-quality VIG compressed air tank in galvanized design. Specifications: -Volume: 1000 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 800 mm -Container height: 2348 mm -Weight: 200 kg -Connection compressed air inlet: 2 x G 2" -Connection compressed air outlet: 2 x G 2" -Connection safety valve: G 1/2" -Connection condensate drain: G 1 1/2" -Maintenance opening: 1 x hand hole 100x150 mm Manufacture and testing according to EC Directives 2009/105/EC & AD 2000 Design temperature: -10 °C to + 50°C Surface coating: galvanized Visit our shop. We always have a wide range of new and used compressors in stock!

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, table width: 650 mm, table length: 2,600 mm, table load: 2,300 kg, overall weight: 12,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 28,000 W, tool weight: 10,000 g, number of axes: 3, This 3-axis IBARMIA ZV 40 L2200 vertical machining centre was manufactured in 2000. It features an X-axis travel of 2200 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine has a maximum table load capacity of 2300 kg and a rapid traverse rate of 30 m/min. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV 40 L2200 machine we have for sale. Contact us for further details. Pgodpoy Umlpjfx Af Sst - X-axis travel in 2-station machining (shuttle operation): 720 mm- Z-axis travel (vertical): 600 mm (Optional: 800 mm)- Number of T-slots: 5- T-slots size: 18 mm- Distance between T-slots: 125 mm- Min./Max. distance spindle nose to table: 200 / 800 mm (Optional: 1000 mm)- Tool taper / holder: SK40 - DIN 69871 (Options: HSK A-63 DIN 69893 or HSK A-80 DIN 69893)- Pull stud for SK tool holder: DIN 69672- Clamping force of tool retention (SK): 12000 N (Options: HSK A-63: 18000 N / HSK A-80: 28000 N)- Inner bearing diameter: 80 mm- Max. standard spindle speed: 6000 rpm (Options: 4000 / 8000 / 10000 rpm)- Main spindle motor power at 100%: 28 kW (Intermittent: 38.5 kW)- Constant power for standard configuration from: 1500 rpm- Max. torque at 100%: 178 Nm (Intermittent: 245 Nm)- Feed force in X, Y, Z at 100%: 13000 N (Intermittent: 15600 N)- Rapid traverse rate in X, Y, Z: 30 m/min- Max. working feed rate in X, Y, Z: 10 m/min- Positioning tolerance Tp X(1000mm)-Y-Z: 0.015 mm- Max. positioning scatter Ps max.: 0.010 mm- Measuring system in X-Y-Z: Linear glass scales- Milling capacity in steel (St 60): 650 cm³/min- Drilling capacity in steel (St 60): Ø 60 mm- Tapping capacity in steel (St 60): M-36- Number of tool pockets: 24 (Options: 40 - 52)- Max. tool length: 300 mm- Max. tool weight: 10 kg- Max. tool diameter (full magazine): 85 mm- Max. tool diameter (adjacent pockets free): 125 mm- Tool management: Random- Tool change time: 3.5 s- Chip-to-chip tool change time: 7 s- Floor space requirement: approx. 17 m²- Coolant tank capacity: 370 liters- Machine length (Dimension A): 4200 mm- Textured paint structure (2 colors): RAL grey 7037 / blue 5012- Electrical connection: 55 kW- Operating voltage: 400 V / 50 Hz- Compressed air connection: 6 bar- Coolant pump power: 0.75 kW- Standard equipment: CE machine enclosure protection, chip conveyor, coolant tank, linear glass scales in X/Y/Z axes, vertical interior cladding along X-axis, workspace lighting, automatic centralized lubrication, hydraulic counterweight balance for spindle head, automatic pneumatic spindle cleaning, mobile control panel, rigid tapping (tapping without compensation chuck).- Factory options available: Internal coolant supply (IKZ), full machine enclosure, partition wall for shuttle operation, dividing heads/rotary tables for 1 or 2 additional machine axes, work tool touch probe, digitization systems, tool monitoring systems, portable electronic handwheel- depending on the requirements, parts in the Y-axis would need to be replaced or repaired

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA sawdust extractor with dust filters is a highly efficient and robust dust extraction system designed for woodworking and carpentry facilities. Thanks to its increased filtration area and four fabric bags, this model effectively removes both wood chips and fine dust generated during intensive machine operation. The FM300SA woodworking dust extractor is an ideal solution for many hours of continuous operation in an industrial environment. Main Advantages of the Machine Extraction capacity of 3900 m³/h – effective removal of sawdust and dust even when working with several machines simultaneously 4 fabric bags – increased capacity and longer intervals between emptying High-efficiency dust filter – separates particles as small as 2 microns Metal, dynamically balanced impeller – vibration-free and quiet operation of the system 2.2 kW three-phase motor – ensures reliable and continuous operation in industrial conditions Pgedpez A Txysfx Af Sot Stable steel construction – resistant to deformation and demanding operating conditions Mobility – four-wheel mobile base with a maneuvering handle Construction and Technology The FM300SA is equipped with a multi-stage filtration system based on filter bags and dust filters, ensuring a high level of air purification. The metal WhirlWind series impeller and efficient suction duct system guarantee stable airflow without pressure drops. The Y-shaped connection manifold (1 x 150 mm / 3 x 100 mm) allows several processing machines to be connected simultaneously. Precision and Performance Thanks to optimized duct aerodynamics and a large filtration surface, the CORMAK FM300SA sawdust extractor provides effective dust removal even during continuous operation. High-quality filtration reduces the amount of contaminants in the working environment, directly contributing to operator health and improving the precision of machine operation. Applications The FM300SA is designed for professional users who work with large quantities of sawdust and wood chips. It is ideally suited for: carpentry workshops and furniture manufacturing facilities, production lines equipped with multiple machines, dust extraction from sanders, planers, saws, milling machines, and thickness planers, areas requiring fine dust filtration (dust filters included). Standard Equipment metal mobile base with 4 wheels, 4 fabric bags (filtering and waste bags), 2 high-efficiency dust filters, extraction connection manifold (1 x 150 mm, 3 x 100 mm). Optional Equipment 100 mm extraction hose, galvanized clamp. Technical Specifications Parameter Specification Extraction capacity [m³/h] 3900 Negative pressure 1750 Pa Noise level 75 dB Bag volume [l] 220 Number of bags 4 Suction connection diameters [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1400 x 570 x 2250 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase Manual (DTR) Yes CE Declaration Yes

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator Pedpsdqkrwofx Af Ssgt - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Pjdpsxv Dilefx Af Ssgt Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 Dust Extractor with Dust Filter The CORMAK FM230 with a dust filter is a compact, mobile, professional-grade dust extractor designed for the efficient removal of wood chips, dust, and sawdust in woodworking workshops. Thanks to the use of a dust filter, the machine provides not only high suction performance but also improved filtration efficiency, significantly enhancing air quality in the workplace. Pjdsz A Ut Eopfx Af Sjgt Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ideal for use with low- and medium-powered woodworking machines. Dust filter – effectively captures small particles, including fine sanding dust. 0.75 kW / 230 V motor – quiet, energy-efficient operation without the need for a three-phase power connection. Mobility – four castor wheels allow the extractor to be easily moved around the workshop. Compact design – the machine takes up little space, making it an ideal choice for small workshops. Construction and Technology The machine is equipped with a metal sawdust fan, ensuring a long service life and reliable operation. The high-quality dust filter efficiently separates dust particles from the airflow, helping to reduce airborne dust in the workshop. The robust powder-coated housing protects the internal mechanisms, while the sealed suction system prevents pressure losses. Precision and Operating Efficiency The CORMAK FM230 woodworking dust extractor provides stable and consistent suction. An extraction capacity of 1,000 m³/h combined with a low-power motor enables efficient operation with a single woodworking machine without interrupting the work process. Thanks to its fine-particle filter, it is also an excellent dust extractor for fine dust generated during wood sanding. Applications Small and medium-sized woodworking workshops Craft and production facilities Technical schools and educational workshops Hobby woodworking workshops The FM230 is ideally suited for use with: milling machines, planers, jointers, belt sanders, thickness planers. Standard Equipment Dust filter Waste collection bag Castor wheels with brakes Bag fastening clamp Optional Equipment Ø100 mm extraction hose Suction outlet reducers Additional set of filter bags Technical Specifications Specification Value Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Negative pressure 1,800 Pa Noise level 70 dB Negative pressure 1,020 Pa Noise level 70 dB Bag capacity 60 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Dimensions (H x W x L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230L1 Dust Extractor with Dust Filter The CORMAK FM230L1 with a dust filter is a modern, mobile dust extractor that combines high operating efficiency with a compact design. The use of a horizontal impeller and an advanced filtration system allows the machine not only to effectively remove sawdust and wood chips from woodworking machinery, but also to vacuum production hall floors. The machine has been designed for professional woodworking facilities as well as hobby workshops. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ensures efficient removal of wood chips and sawdust from a single workstation. Balanced WhirlWind metal impeller – quiet, stable operation and increased durability. Dust filter and plastic waste collection bag – effective separation of contaminants and cleaner air in the workshop. High negative pressure and horizontal suction system – efficient extraction of even fine dust and particles. Production hall vacuuming capability – the included wide floor nozzle expands the functionality of the machine. Compact dimensions – takes up little space in the workshop. Large wheels and ergonomic handle – easy transportation in various working conditions. Construction and Technology The heart of the FM230L1 woodworking dust extractor is a multi-blade WhirlWind series impeller mounted horizontally in a metal housing. It provides even suction pressure and smoother operation compared to standard vertical designs. The reinforced motor operates in continuous S1 duty mode, ensuring reliability even during intensive use. Additional structural supports eliminate vibration and ensure a long service life of the suction system. Pedpfx Aoz A Ur Uof Segt Precision and Operating Efficiency The FM230L1 operates at a rotational speed of 2,800 rpm, allowing efficient extraction of sawdust, wood chips, and fine dust generated by woodworking and sanding machines. The filtration system removes airborne contaminants, reducing the need for frequent cleaning and improving operator comfort. The set includes a large floor nozzle, making the machine a practical sawdust vacuum cleaner as well. Applications Craft woodworking shops and furniture manufacturing facilities Educational and school workshops Sanders, saws, milling machines, and jointers Cleaning production halls and production lines Standard Equipment Dust filter Plastic waste collection bag Floor nozzle Metal fastening clamps Lockable, bearing-mounted castor wheels Optional Equipment Ø100 mm extraction hose Galvanized clamp Additional filter bag set Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Extraction capacity 1,150 m³/h Negative pressure 1,020 Pa Noise level 65 dB Bag capacity 90 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Height 1,550 mm Width 420 mm Length 800 mm Power supply 230 V Weight 27 kg The FM230L1 with dust filter is a compact and reliable woodworking dust extractor designed for everyday work with wood and wood-based materials. Choose quality, stability, and industrial-grade filtration – order today and improve working conditions in your facility!

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 400V Dust Extractor with Dust Filter The CORMAK FM300 400V with a dust filter is a professional industrial-grade dust extractor designed for the efficient removal of contaminants generated during the processing of wood and wood-based materials. Thanks to its three-phase 400V power supply and a filter with a filtration accuracy of 2 microns, the machine meets the requirements of modern production facilities and woodworking workshops. Pgjdpfx Afoz A T Stj Sot Main Advantages of the Machine High extraction capacity – 2,800 m³/h – efficient extraction of sawdust, wood chips, and dust from various processing stations. 2-micron self-cleaning dust filter – effective separation of fine dust particles ensures cleaner air in the production hall. 1.5 kW three-phase motor – stable and continuous S1-duty operation, designed for intensive use. Balanced metal impeller – guarantees quiet, vibration-free operation and a long service life. Compact and mobile design – the extractor takes up little space and can be easily moved thanks to its 4 castor wheels. Quick bag fastening system – allows efficient replacement of the plastic waste bag without unnecessary downtime. Construction and Technology The FM300 400V is a technologically advanced woodworking dust extractor equipped with a highly efficient metal fan. The impeller position and aerodynamic design of the suction channel provide strong negative pressure and high airflow capacity. The 2-micron dust filter enables precise separation of dust generated during sanding, milling, and cutting wood, functioning as a high-precision sawdust extractor. The filter features a self-cleaning design, minimizing the need for maintenance. Precision and Operating Efficiency The FM300 400V operates at a rotational speed of 2,850 rpm. Combined with an extraction capacity of 2,800 m³/h and stable suction pressure, this allows continuous operation even in heavily dust-laden environments. It is a reliable solution for users who require both cleanliness and high performance from a single machine. Applications Woodworking and furniture workshops Wood processing lines in small and medium-sized production facilities Extraction of chips and dust from saws, milling machines, sanders, thickness planers, and jointers Mobile sawdust fan for local dust extraction systems Standard Equipment 2-micron self-cleaning dust filter Y-shaped connector – 2 x Ø100 mm Metal mobile base with 4 wheels Plastic waste collection bag Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Specification Value Extraction capacity [m³/h] 2,800 Motor speed [rpm] 2,850 Bag capacity [l] 153 Number of bags 1 Diameter of extraction outlets [mm] 1 x 130, 2 x 100 Dimensions (L x W x H) [mm] 940 x 510 x 1,960 Weight [kg] 64 Motor power [kW] 1.5 Power supply 3-phase, 400 V User and Maintenance Manual (DTR) YES CE Declaration of Conformity Yes