Used Cormak Cormak 10 Bar Diesel Compressor for sale (47,257)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The CD50 series of our high-pressure machines covers a pressure range of 230 to 2000 bar and a flow rate of 7 to 74 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosing frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine requires only a footprint of 1550 x 920 mm. Four rubber feet are mounted under the frame. In addition, the machine has forklift pockets and lifting eyes attached to all four corners. A galvanized roof plate provides protection and storage for high-pressure hoses, for example. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow Rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm Bedpehgbf Ejfx Albswt CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl., water-cooled Drive engine power: 37.3 kW Drive engine speed: 1800 rpm Tank: 90 L Max. fuel consumption: 10.0 L/h Noise level (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg) Includes standard accessories.

Condition: used, Screw Compressor SCHNEIDER AM B7.5 10 – used – ----- Technical Specifications ----- Bwedpfx Aloy Dp Swsbjt Max. pressure: 10 bar Motor: 7.5 kW Air delivery at 10 bar: 1,000 l/min Weight: 250 kg Operating hours: 6,922 h Load hours: 2,083 h Year of manufacture: 2017

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 66 m³/h, operating pressure: 120 bar, type of cooling: air, Equipment: documentation/manual, type plate available, 1 high-pressure piston compressor including acoustic hood and 1500 liter compressed air tank Bwedpfevgrp Ssx Albjt Ran trouble-free until the entire production was shut down. Manufacturer: J.A. Becker & Söhne Type: SV 1101/120 Number of cylinders: 3 Number of pressure stages: 3 Volume flow: 66m³/hour Compression pressure: 120 bar Drive power: 22 KW Speed: 1457 rpm Year of construction: 1998 Compressed air tank Manufacturer: FMS Capacity: 1500 liters Operating pressure: 120 bar Year of construction: 1998 Product data sheet as PDF attached under the ad description !!!

Condition: new, Year of construction: 2026, functionality: fully functional, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure tank with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as a stabilizing element for compressor operation parameters. Key Features of the 200 L Pressure Vessel Bjdpfx Alexbzd Rjbswt Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 200 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of ½", 1", and 2" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Technical Specifications: Parameter Value Weight (kg) 80 Number of Connections 6 Connection Sizes ½", 1", 2" Dimensions 166.5 x 45 cm Tank Capacity (L) 200 Working Pressure (bar) 11 Wall Thickness (mm) 4 Diameter (mm) Ø 450 Height (mm) 1665

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, machine/vehicle number: 21572418, Exhibit in stock immediately available (Plug and Play): RENNER RSK-PRO 15 - 10 bar oil-injected screw compressor Bsdpfx Aotvgghjlbswt with integrated refrigerant dryer The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 15 kW Delivery quantity: 2.31 m³ / min Sound level: 72 dB (A) Compressed air outlet: 3/4 " Dimensions length x width x height: 1423 x 684 x 1131 mm Weight: 389 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 1997, condition: good (used), Build in 1997 Power 75 KW Pressure: 9 bar Bwodpfsg A Dypex Albjt

Condition: new, Year of construction: 2026, The LUFT screw compressor is the latest solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease to use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 5.5 kW Voltage 400V/50Hz Efficiency 0-6 bar 690 L/min Efficiency at 6 bar 650 L/min Capacity at 8 bar 650 L/min Capacity at 10 bar 630 L/min Outlet port diameter (G) 1/2" Dimensions 810 x 610 x 850 mm Weight 120 kg Bsdpfx Aljmqlguebowt Manufacturer: Cormak

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Bsdpfov Rbvcjx Albowt Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg Bwjdpfx Alovr Eicjbjt We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2023, machine/vehicle number: H2200058, power: 4 kW (5.44 HP), pressure (min.): 10 bar, new piston compressor available immediately: ALMIG HLA-10-10-270 (10 bar) with 270 liter compressed air tank with star delta connection Year: 2022 Hours: 0 h 3 cylinders Pressure: 10 bar Rated power: 7.5 kW Delivery quantity at 7 bar: 801 l / min Compressed air outlet: 3/4 " Bedpfx Aozb E A Ejlbswt Dimensions length x width x height: 1580 x 1311 x 657 mm Weight: 324 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers a pressure range of 200 to 2800 bar and a flow rate of 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, which ensures long service life and corrosion resistance. For aesthetic appeal, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet at all four corners, as well as forklift pockets and lifting eyes at all four corners. The machine features a galvanized roof plate with a side bracket for protecting and storing, for example, high-pressure hoses. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 lpm CD200-250 250 bar 250 lpm CD200-1000 1000 bar 63 lpm CD200-1380 1380 bar 42 lpm CD200-2500 2500 bar 25 lpm CD200-2800 2800 bar 23 lpm Bwjdehgbhnspfx Albot OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optional without ADD blue) Drive engine power: 149.1 kW Drive engine speed: 1950 rpm Tank: 135 L for skid and 200 L for trailer Max. fuel consumption: 18-20 l/h Dimensions and dry weight SKID: 2170mm x 1350mm x 1810 mm (1785 kg) Dimensions and dry weight TRAILER: 3800mm x 1900mm x 2000 mm (2500 kg) Includes standard accessories.

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR series, is the most modern solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee efficient and trouble-free operation. CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision of workmanship. Solid construction, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. CORMAK: Technology that drives your success! Technical parameters Engine power 15 kW Voltage 400V/50Hz Efficiency 0-6 bar 2100 l/min Efficiency at 6 bar 2000 l/min Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Outlet 3/4" Dimensions 1080 x 750 x 1000 mm Weight 460 kg Manufacturer: Cormak Bedpoklz Syofx Albowt

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: S0065457, Screw compressor ALMIG BELT XP 11 - 10 bar (air cooled) Year 2023 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 11 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.55 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 11 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 66 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 285 kg Compressed air connection: G 3/4 " Bwsdod Db Ixspfx Albet

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 002331512500001478, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 6.00 Bh Bsdpfjypm Sdex Albswt Year: 2025 Maximum pressure: 14 bar Flow rate (14 bar): 500 l/min Nominal power: 4.0 kW Cylinder : 2 Mains voltage: 400 V Compressor speed: 785 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1112 mm Weight: 135 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer, similar but without ROM, Rioned, Karo, etc. - Single-axle trailer with hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, rear lights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: CTR-C 43/180 | 43 l/min at 180 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 55/160 | 55 l/min at 160 bar | Petrol engine: Honda GX690 17.7 kW CTR-C 60/150 | 60 l/min at 150 bar | Diesel engine: Kohler KDW 1003 19 kW CTR-C 20/350 | 20 l/min at 350 bar | Diesel engine: Kohler KDW 1003 19 kW - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 350 kg - High-pressure pump: Comet TW Premium with integrated gearbox - HD hose reel: manual, with max. 60 m of 1/2" hose (included). Model CTR-C 55/160 OPTIONAL with electric HD hose reel. - Water supply hose reel: manual, with 35 m of 3/4" hose - Water tank: 400 l Bwjdefdvkrjpfx Albet - Options such as remote control, booster pump, warning light, work light, aluminum hose cover, and accessories available upon request.

Condition: new, Year of construction: 2026, CKT 400 × 1000 CNC Lathe with Driven Tooling is an advanced CNC turning machine designed for precision machining of metal components in medium and large-scale production facilities. Equipped with the Siemens Sinumerik 808D CNC control system, it provides reliability, high accuracy, and ease of operation, meeting the requirements of modern industrial manufacturing processes. Key Features of the CKT 400 × 1000 CNC Lathe with Driven Tooling The CKT 400 × 1000 CNC metal lathe is a professional industrial solution offering: High machining precision – maximum swing over bed of 400 mm and swing over cross slide of 210 mm, with minimum setting resolution of 0.001 mm on both X and Z axes. Flexible spindle system – spindle speed range of 0–2000 RPM, spindle bore of 52 mm (optional 72 mm), and MT6 spindle taper provide versatility for various machining applications. Intuitive CNC control – Siemens Sinumerik 808D Advanced system with Polish-language interface and Siemens servo drives ensures easy operation and high process reliability. Rigid machine construction – net weight of 2000 kg provides excellent stability during machining of workpieces up to 1000 mm in length. Efficient tooling system – 4-position tool holder with driven tooling (optional 6 or 8 positions), supporting tools up to 20 × 20 mm (optional 25 × 25 mm), enables flexible machining operations. Fast setup and adjustment – convenient tool positioning, work zero setting, and corrections can be performed without writing complete CNC programs. Enhanced operator safety – controlled rapid movements and spindle speed limitation allow precise and safe machine operation. Extended component durability – automatic lubrication system for gears and guideways reduces wear and increases machine service life. Bedov A S N Depfx Albswt Optimized cooling system – ensures thermal stability and protects cutting tools and workpieces during intensive machining. Energy-efficient operation – the 5.5 kW main motor combined with 6 Nm X and Z axis feed motors provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring advanced G-code programming knowledge. Customizable configuration – available options include Fanuc Oi-TF control, hydraulic chuck, bar feeder, and CAD/CAM software integration. European safety standards – CE Declaration of Conformity Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Manual lathe chuck 4-position tool holder with driven tooling Complete set of soft jaws Hydraulic tailstock with MT5 quill Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual CE Declaration of Conformity Technical Specifications Maximum swing over bed 400 mm Maximum swing over cross slide 210 mm Distance between centers 1000 mm Spindle speed range 0–2000 RPM Spindle bore 52 mm (optional 72 mm) Spindle taper MT6 Tool positions 6 + 1 driven tool Maximum tool size 25 × 25 mm Minimum setting resolution (X / Z axes) 0.001 mm / 0.001 mm X-axis rapid traverse 8 m/min Z-axis rapid traverse 10 m/min Tailstock taper MT5 Maximum tailstock quill travel 120 mm Main motor power 5.5 kW X-axis feed motor 6 Nm Z-axis feed motor 6 Nm Packaging dimensions (L × W × H) 2640 × 1500 × 1770 mm Net weight 2000 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 2,700 h, Used screwcompressor immediately available (Plug and Play): RENNER RS-PRO 4,0 (10 bar) oil-injected screw compressor Bsdetpxhujpfx Albjwt Operating hours: 2700 h Pressure: 10 bar Rated power: 4,0 kW Delivery quantity: 0.55 m³ / min Sound level: 67 dB (A) Compressed air outlet: G 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 151 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Bedsznt I Iopfx Albjwt Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Bedpoxufbtjfx Albewt Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately Bedpfxsw U U Sce Albewt - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available. Bsdsx Uwtdepfx Albewt

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Bodjzmub Tjpfx Albowt

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, Exhibit model available immediately: New Kaeser SK 26 SFC frequency-controlled screw compressor (12 bar) Sigma Control 3 controller Max. pressure: 12 bar Rated power: 15 kW Delivery rate: 0.82 to 2.09 m³/min Noise level: 68 dB(A) Bwjdozklazjpfx Albjt Compressed air outlet: 1" Dimensions (L x W x H): 750 x 905 x 1245 mm Weight: 337 kg Operating hours: 1.9 h Financing: Convenient leasing options via our partner bank available for new machines. Visit us: Come visit our retail store. Our stock: We always carry a wide selection of new and used compressors!

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: Bwsdpfxoxaahxe Albot - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Bsdpfx Aleg A Hcqjbowt