Used Chamber Dryer for sale (3,811)

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available- Dujdpofh Hahofx Akbeu

Condition: excellent (used), machine/vehicle number: 07 021 060/06 0031, functionality: fully functional, power: 9.7 kW (13.19 HP), number of chambers: 1, Dry Air Dryer Luxor LS 50 Connected load: 9.7 kW Dry air volume: 50 m3/h Heater: 6 kW Silo Motan BS 60-L Volume: 60 L Heater: 1.55 kW Material Loader Motan Type: METRO HES 50-1ANC-AAA-B-A Power: 1.1 kW The technical condition of this system is very good! Dujdpfx Akjy Examjbsu

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Dusdjyw Thvepfx Akbeu Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth

Condition: used, Year of construction: 1999, Volumetric flow rate ISO 7183 A1: 0.6 m³/minPressure dew point: 3°CPressure loss: 0.07 barPower consumption at 100% flow: 0.29 kWPower consumption at 50% flow: 0.17 kWOverpressure: 3 to 16 barAmbient temperature: +3 to +43°CMax. inlet temperature (compressed air): 55°CDimensions (W x D x H): 630 x 484 x 779 mmWeight: 70 kgCompressed air connection: G 3/4Condensate drain connection: G 1/4Electrical supply: 230 V / 1 / 50 HzStorage location: Dujdpfx Akoy Ernwebou

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Testing Device Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion testing device / salt spray chamber for salt spray, condensation water, and combined testing. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption (humidifier): approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling volume (bottom trough system): approx. 15 liters Testing procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used device from industrial application. Optical condition according to the pictures. Interior with visible deposits / corrosion traces. Device can be switched on, display is active. Dsdpfx Aezba N Tjkbjuu A complete technical functional test under test conditions was not performed by us. Inspection possible by appointment. Scope of supply: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and data sheets. Errors and changes reserved.

Condition: good (used), Weiss SC 450 Corrosion Testing Equipment Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing equipment / salt spray test chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Djdpfozbatrsx Akbjuu Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray channel Heated compressed air humidifier Flow and dosing device for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Test procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial use. Operating hours according to display: approx. 37,926.6 h Optical condition according to pictures. Interior with visible deposits / corrosion marks due to use. The device can be switched on, display is active. A complete technical function test under test conditions has not been carried out by us. Inspection and testing on-site are possible by arrangement. Scope of delivery: see pictures. Loading can be arranged. All information provided to the best of our knowledge based on available documents, nameplates, software displays, and manufacturer data. Errors and changes excepted.

Condition: good (used), Year of construction: 1995, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE 800 Year built: 1995 Plate size: 800 x 800 mm Duedozb Utyspfx Akbsu Number plates: 75 Press content: Approx. 1.100 liters Filter area: Approx. 82 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Automatically Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Dimensions: L 6.965 x W 1.300 x H 2.022 mm Empty weight: 7.200 kg Technical doc.: Yes Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain Condition: Used-good Note: It will be available starting in August. Price: By request

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Dedpsza Dv Isfx Akbeuu Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of supply: see pictures Inspection possible by arrangement. Loading can be organized. Subject to changes and errors in the technical data.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,100 mm, total width: 1,270 mm, total height: 1,520 mm, overall weight: 1,112 kg, conveyor belt width: 910 mm, M&R Radicure 36/10 Dryer - Selling due to business closure £7,500 + VAT (ono) Located in Mid Wales, UK Dsdpfx Aezb N Swokbsuu Excellent condition Dimensions & Power Specs Belt Width: 36 inches (91 cm). Chamber Length: 10 feet (305 cm). Infeed Extension: 5 feet (152 cm). Outfeed Extension: 5 feet (152 cm). Total Length: 20 feet (610 cm). Electrical Draw: 208/230 Volts. Phase Requirement: 3-phase electrical setup Sold separately or part of a package in another listing We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment. The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Dujdpezb N Rtjfx Akbou Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Duodpforfyrpex Akbeu Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: excellent (used), Year of construction: 2008, operating hours: 87,000 h, functionality: fully functional, overall weight: 775 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, fuel type: electric, volume flow: 190 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, Manufacturer: Kaeser ASD 32T screw compressor + refrigerant dryer serviced throughout!!! complete documentation Year of construction: 2008 Nominal pressure: 8 bar air flow: 3.16 m3/min air flow: 189.6 /hour Dedpji E H Iksfx Akbouu operating hours: Refrigeration dryer: ABT60 Compressed air connection: G 1¼ Voltage: 400V/3PH, 36A Power: 18.5 kW engine speed: 2945/min Ambient temperature: 3 / 45°C machine weight: 745 machine dimensions: 1,770 x 900 x 1,530 mm

Year of construction: 2002, condition: good (used), Kaut absorption dryer CR 600 Manufacturer: KAUT GmbH Type: Dryer CR600 Year of construction: 2002 Dry air volume, nominal: 600 cbm / h Dry air volume, blowing freely: 750 cbm / h Regeneration air volume: 170 cbm / h Voltage: 400V / 3N + PE / 50Hz Power consumption: 5.9 kW Párátlanítási teljesítmény 10°C/70% relative páratartalom mellett: 3.8 kg/h Párátlanítási teljesítmény 20°C-on / 60% relative páratartalom: 4.4 kg/h Párátlanítási teljesítmény 20°C/80% relative páratartalom mellett: 5.2 kg/h Available external pressure, dry air side: 220 Pa Available external pressure, regeneration air side: 150 Pa Djdpetib R Iofx Akbeuu Installation and dimensions Process air inlet (W x H): 380mm x 257mm Regeneration air inlet (W x H): 166mm x 179mm Dimensions (H x W x D): 735mm x 1125mm x 600mm Weight: 110kg

Condition: excellent (used), Year of construction: 2002, operating hours: 122,000 h, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), fuel type: electric, volume flow: 1.56 m³/h, operating pressure: 8 bar, noise level: 65 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Dujdpfx Aern S Hpskbou Empty volume: 199 l

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, volume flow: 858 m³/h, total width: 1,060 mm, total length: 1,530 mm, total height: 1,513 mm, pressure: 16 bar, overall weight: 600 kg, operating pressure: 16 bar, input voltage: 400 V, type of cooling: air, pressure (max.): 16 bar, power: 1 kW (1.36 HP), input frequency: 50 Hz, Equipment: type plate available, compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Dujdpfoyfpbtex Akbou Width: 1060mm Height: 1513mm Weight: 660

Condition: used, Year of construction: 2005, functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Dodpfjt A Uwtsx Akbeuu Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Weight: 275 kg

Condition: used, Year of construction: 2004, Fluid bed by Romaco Innojet. Model VENTILUS 800 (IEV800-001-2004). Manufactured in 2004. Included peripherals: - Bag filter DFO 4-32-R - Air heater Duedex Sqyxepfx Akbsu

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors Duedpfx Aozb Etdskbju with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, El. heated chamber oven, make Heraeus Type: PL 320 Dujdjxlq Tpspfx Akbsu Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, L version (with lighting), from 2019. This unit comes directly from the manufacturer's showroom and has been used very little. It is in very good technical and visual condition. Key features: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters * Temperature range: * without humidity: 0°C to +60°C * with humidity: 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: Dodpfxjymy Utj Akbeuu * Integrated lighting system (light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform illumination of samples * Possibility of operation in day/night cycles Equipment and advantages: * Precise temperature and humidity control * Very good uniformity of conditions within the chamber * Quiet and stable operation * Reliability and high-quality Memmert construction Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: Upon request, we can send photos, a video of the unit in operation, or conduct an online presentation. 9-month warranty on spare parts for the unit.

Year of construction: 2020, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: ACE 950 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2020. Djdpfxjr Rn Rvs Akbouu Textile oven almost new, overhauled and cleaned. Sold new for just over €15,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Ace 950 drying tunnel: - MAX POWER: 14 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 950 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x950 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, with a 12-month warranty, -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1390 x 1850 x 2140 mm -Volume: 1000 liters Duodpfx Akjzbr U Uebeu -Maximum temperature: 1340°C -Siemens PLC control system H1700 (100 programs with 20 segments each) with NCC -Automatically generated report after each heating cycle -Thyristor controlled -2 opposing, lockable doors -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Calibrated thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working chamber, without protocol -Separate control cabinet -Audible alarm and alarm light -Over-temperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet -DGUV V3 test currently valid with protocol -Documentation, CE declaration, wiring diagrams The oven is in TOP condition. It was previously used in a cleanroom environment for the production of hip joints. We would be happy to offer assistance with installation, commissioning, and training of your employees. Please contact us! We offer new and used industrial ovens. Inspection in our warehouse is possible upon request! Oven, furnaces, heat treatment furnace, firing furnace, hardening furnace, heating furnace, annealing furnace, sintering furnace, drying oven, industrial oven, melting furnaces, ceramic oven, tempering oven, sintering oven.

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Dusdpfozachcox Akbju Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Dujdpfxoxv A I Ho Akbou

Condition: excellent (used), Year of construction: 2020, Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph Dodpork Rp Ejfx Akbouu