Used Cesab S 010I for sale (68,145)

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Lhjdpfez Alhiex Abzel Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: used, functionality: fully functional, machine/vehicle number: CE344226, Year of construction: 2009, operating hours: 422 h, load capacity: 7,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: simplex, construction height: 3,400 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: CE344226 Load center: 600 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Super elastic Rear tire type: Super elastic Battery voltage: 80V Lhjdpoylrl Ijfx Abzel Sideshift, fork positioner, 3rd valve, 4th valve, front windshield, full cabin, interior mirror, windscreen wiper,

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP Lsdpfx Abezulf Sszohl 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: used, Year of construction: 2016, Dough divider WP Kemper Relaxer S This model produces dough strands one at a time, gently handling the dough. The tedious manual dough strand production is eliminated in small and medium-sized businesses. Dough strand production for storage in rattan or plastic baskets. Year of manufacture: 2016 Condition: cleaned and inspected Performance: 4 dough strands per minute / 240 per hour Dimensions of the dough strands (L x W x H): 850 x 165 x 110 mm Suitable for TA 150 to 180 Hopper capacity approx. 160 kg (opening 720 × 600 mm) Hopper filling height: 1830 mm (loading with a tilting lift is possible) Insertion device for 1000 mm long baskets Lhedpez A Skbofx Abzel Operation via two-hand safety switch Machine is mobile with a locking mechanism External dimensions (L x W x H): 1500 x 750 x 1830 mm

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Ljdpfxozaum De Abzohl Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical specifications of the DURMA AD-S 30175 press brake: number of axes: 4 (X, Y1, Y2, R) maximum pressing force: 175 t maximum bending length: 3050 mm slide stroke: 265 mm reach: 410 mm approach speed: 140 mm/s bending speed: 10 mm/s return speed: 130 mm/s distance between columns: 2600 mm dwell time: 102 ms dwell distance: 8 mm safety distance: 263.2 mm Lhsdpfxoz Diu Tj Abzol oil tank volume: 200 l maximum operating pressure: 285 kg/cm2 motor power: 18.5 kW current: 37 A current protection: 50 A control voltage: 24 V power supply: 3 x 400 V; 50 Hz dimensions (L x W x H): 5450 x 2550 x 2750 mm weight of the DURMA AD-SERVO 30175 machine: 10830 kg Equipment of the DURMA press brake: CNC control unit: CYBELEC ModEva 10S manual deflection compensation European-type tool clamping system European-type punches and dies powered back gauge front supports with T-slots and tilting stop

Condition: used, Year of construction: 2022, travel -x axis 550 mm travel -y axis 400 mm travel -z axis 400 mm a-axis +/- 120 ° C-axis 360 ° control HEIDENHAIN - TNC 640 number of spindle speeds 24.000 numbers of positions in the tool changer 48 tool taper HSK-A50 5-axis simultaneous machining center | CHIRON - FZ12-S equipped with ITC (70 bar), NC swivel rotary table, 48-way tool changer & chip conveyor. The machine has only 3.606 H spindle hours. Additional equipment: - BLUM LaserControl NT Lhsdpfx Asz Dbyhjbzsl - BLUM TC52 Touch Probe - Scraper Belt Chip Conveyor - KF150/500 Cooling System The machine is in very well-maintained, like-new condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FZ12S| FZ 12-S | FZ 12 S

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories Ljdpfoz Ag A Isx Abzohl

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Lhodpoz A Tgkefx Abzsl Schuko socket 10A Selector unit Tool heating 12x

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request. Ledoznd Dyepfx Abzehl

Condition: used, Year of construction: 2018, Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement. Lhsdpfx Aoz A Ei Rebzel

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW Lsdpfx Abszkbmdjzjhl - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Lodpfxjzyx E Ao Abzjhl Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Lodpfxjz Ag Anj Abzshl Additional accessories

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm Lhsdpfx Ajz Ehqcjbzol hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edge banding machine, after a complete overhaul, will be available at the end of October. TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Preparation for connecting a return system ■ Variable feed rate: 8-18 m/min ■ Automatically adjustable groove guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA pre-melting unit: 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional unit for profiling with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat profiling, polishing unit (top and bottom) Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation Lhsdpfxez A Tf Tj Abzjl General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operational status: end of October ■ Machine length: 6075 mm ■ Year: 2018 ■ Total processed length: 2.5 million meters

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 8398, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 2,500 mm, actuation type: mechanical, total height: 2,200 mm, total length: 3,800 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, Löser external cylindrical grinding machine for grinding the outer circumference of pipes 1.3. Technical data Lhjdpjzvn Urofx Abzsl Dimensions: Width approx. 3.8 m | Height approx. 2.2 m | Depth approx. 2.0 m Power supply Electrical connection: 3 x 400 V AC | 50 Hz Total power: 15 kW Fuse: 32 A Pneumatic connection Main supply: 6 bar | approx. 5 m3/h Supply for air nozzles: 6 bar | approx. 30 m3/h Workpieces that can be processed Pipes made of steel or stainless steel with the following dimensions: Length: from 10 mm to 100 mm Diameter: from 50 mm to 1000 mm Grinding station type L Number of grinding stations: 1 Grinding mode: Wet machining Grinding technology: Grinding with a grinding belt and contact wheel | Grinding with a grinding wheel Cutting speed: continuously adjustable | max. 30 m/s Power: 7.5 kW per station Current consumption: maximum 14 amps per station Dimensions of grinding belt: Width 150 mm | Length 2,500 mm Dimensions of contact wheel: Width 150 mm | Diameter 400 mm Dimensions of grinding wheel: Width 150 mm | Diameter 400 mm Belt tension: Pneumatic | manually adjustable Station positioning: Manual Workpiece transport Workpiece support: V-groove | Angle 120° Height adjustment of V-groove: Manual Feed devices: 1 Positioning of feed device: Manual Feed speed: approx. 1 m/min to 10 m/min; depending on the workpiece diameter Coolant management The machine is prepared for wet machining. A Stevens paper band filter, type PF 120, machine no. 322177, is included in the scope of supply.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 560 kg, total width: 1,200 mm, total length: 1,600 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, We offer this very good Vollmer Unimat S sharpening machine, year of construction 2002. Lodpozwczvofx Abzehl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Mazak FH-5800 – Horizontal Machining Center Spindle cooling Max. 12,000 RPM Z = 660 millimeters Lhjdpfx Abez Ehkpjzjl X = 710 millimeters Y = 610 millimeters Tool magazine for 40 tools, newer control system – 2-pallet system.

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m² Ljdpfx Asz Ai Dnjbzohl

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! Ljdoz Ag Abepfx Abzehl TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 778 mm, total length: 1,220 mm, total width: 273 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – special tray + 1-year warranty + Including aquamatic system + Including end discharge cable & REMA 320 connector (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 273 mm Height: 778 mm Weight: approx. 730 kg Suitable for the following models (and more): Still FM-X 12 Still R 60-25 Jungheinrich ETM 214 Heli CPD 10 Heli CPD 15 Toyota 6FBRE14 Toyota 7FBRE16 Toyota 7FBRE16N Toyota/BT OME 100 H Toyota/BT OP 1000 SE Toyota/BT OPW 1200 HSE Lhjdpsy Rnkxjfx Abzjl Toyota/BT RR-B 1 Toyota/BT RR-M 14 Toyota/BT RRE 140 Toyota/BT RRE 140 E Toyota/BT RRE 140 M Toyota/BT RRE 160 Toyota/BT RRE 160 M Crown ESR 5240 Caterpillar NR14N2 Cesab R112 Doosan B15NS Doosan B18NS Doosan B20NS Hubtex EASY Hyundai 16BRJ-9 Rocla HS14F Rocla TEF14 Rocla TEF25 Sichelschmidt 5929 Sichelschmidt M925 Sichelschmidt M930 Other common battery sizes available – please enquire. Delivery available.

Condition: used, functionality: fully functional, machine/vehicle number: CE, Year of construction: 2009, operating hours: 5,087 h, load capacity: 1,500 kg, lifting height: 3,000 mm, fuel type: gas, mast type: duplex, construction height: 2,150 mm, power: 37 kW (50.31 HP), fork length: 1,150 mm, drive type: Treibgas, LPG forklift Chassis number: CE Load center: 500 Lodpfx Abou D Trgszjhl ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Reconditioned without warranty Technical condition: good Description: Front work lights new UVV / ASU approval Subject to prior sale Sideshift, 3rd valve,

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Hot press Platen dimensions: 3000 x 1300 mm Total pressure: 120 tons Lhedsz Dp Hijpfx Abzel Cylinders: 8 Electric heating with thermal oil

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Lhjdoy R Dqhopfx Abzol