Used Bosch Double Hydraulic Pump for sale (28,232)

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 Codsy S Amwepfx Agvjrc KM No. 6263540 KM No. 6441936 R90196471

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Codpfxewva I Hs Agvsrc Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Crsdpfx Agedzp Tcjvoc Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. Crsdpowktmrsfx Agvsc The gearbox enables manual, infinitely variable adjustment of the feed or transmission speed.

Condition: used, Motor: 1.5 kW Credpfx Aowdum Togvsc Operating pressure: 70 bar

Condition: good (used), functionality: fully functional, Main pump Credpfx Agsy Uaz Revoc Moog RKP 63 Model 0514 700 169 Displacement 63 cm³/rev Axial piston pump Breuninghaus Model A10VSO 18DR/31R Displacement 18 cm³/rev Pumps removed from a functioning Arburg 270-90-500 injection molding machine Clamping force 50 tons

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Cedpfxjy R A Ulj Agvsrc Depth: 930 mm Height: 730 mm Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Crodey R A Tuopfx Agvjc Width: 800 mm Depth: 930 mm Height: 730 mm Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, Hydraulic Power Unit, Hydraulic Supply Unit, Rexroth ABHAG-4503-0-C, Used Machine Cjdjyuzinopfx Agvorc Manufacturer: Rexroth Model: ABHAG-4503-0-C Pump: Rexroth A10VSO Type: Axial piston pump With pressure-flow controller, maximum operating pressure: 280 bar Dimensions: 900 × 900 × 1350 mm Tank capacity: 160 liters Weight: 400 kg Year of manufacture: 2016 Electrical data: 400 V; 5.5 kW; 10.5 A

Condition: good (used), Hydraulic power unit, Used machine Csdpeuzigbofx Agvsrc Overall dimensions: 750 x 500 x 1210 mm Weight: 314 kg Electrical data: 400V; 7.5 kW; 14.8 A Maximum pressure: 160 bar

Condition: used, Hydraulic Power Unit, Hydraulic Power Pack, Rexroth RRG,Rexroth 4we10, Used machine Manufacturer: Rexroth Model: RRG Dimensions: 1050 × 560 × 1400 mm Tank capacity: 160 dm³ Weight: 325 kg Year of manufacture: 2011 Electrical data: 400 V Crodpfjyuzihox Agvec Valve: Bosch Rexroth 4WE10 Capable of directional switching and stopping within any desired range Flow rate: 100–120 L/min Control voltage: 24 V Maximum pressure: 315 bar

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Crodpfx Agey H Ibvovsc Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 2 t, stroke length: 100 mm, total length: 4,120 mm, total width: 2,300 mm, total height: 2,650 mm, overall weight: 2,000 kg, working width: 2,000 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, height adjustment type: mechanical, pressure plate depth: 120 mm, warranty duration: 12 months, working height: 180 mm, Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Codpfx Agewgybujvjrc Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Engineered for High-Performance Industrial Production This double frame press excels through: large-scale processing capacity, adaptability to various frame types and materials, efficient and reliable operation. It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Cedpfxsy Erzds Agvsrc Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t Crjdpfx Agsfxyh Ajvsc distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, hydraulic pump -Type: Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 2x pumps available Codpevviizsfx Agverc -Price: per piece -Dimensions: 130/90/H120 mm -Weight: 3.4 kg/pc.

Condition: refurbished (used), Moog double pump RKP80/RKP63 for Engel injection moulding machine Cjdoy Ah Nljpfx Agvjrc

Condition: refurbished (used), Moog double pump for Engel injection moulding machine Cjdpfx Agsy Ah Iheverc

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Cedpjyz Dr Tjfx Agverc Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. Crodpfx Ajy Exqlogvoc This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump Credpfsyzmvhsx Agvec -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg Cjdpfxsyzfh Ao Agvjrc

Condition: like new (used), Year of construction: 2015, operating pressure: 210 bar, input voltage: 400 V, only used shortly because of stopped project Csdpfsfx Icwex Agverc

Condition: used, machine/vehicle number: 8422 151, Maximum pressure: 250 bar Delivery rate: 1.6 m³/min Csdpfx Asbp Dpkjgvorc electr. connection: 380 V, 0,45 kW space requirement: 200 x 250 x 350 mm

Condition: ready for operation (used), Delivery volume: 0.8 m³/h Speed: 2850 rpm Motor: 400 V, 0.37 kW Credpfx Agsv E D Rljvsc Submersion depth: 200 mm Total height: 520 mm