Used Becker Dvt 2.140 for sale (301)

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Njdpfx Ajtyyvwjb Aodc Weight net 4,800 kgs

Condition: good (used), Year of construction: 1987, Vacuum pump, rotary vane pump Nedpfxst E D Dzj Ab Asdc -Manufacturer: Becker, vacuum pump type VT 3.10 -Drive: 0.37 kW / 1420 rpm -Volume flow rate: 10 m³/h -Suction pressure: -850 mbar -Dimensions: 420/190/H285 mm -Weight: 15 kg

Condition: good (used), Year of construction: 1989, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Ndsdorgtfropfx Ab Aoc -Manufacturer: Becker, vacuum pump type VT 3.16 -Drive: 0.75 kW / 1420 rpm -Voltage 380 volts -Volume flow rate: 16 m³/h -Suction pressure: -850 mbar -Dimensions: 430/220/H280 mm -Weight: 23 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 8,681 h, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,530 mm, fuel type: gas, mast type: triplex, construction height: 2,140 mm, motor manufacturer: Mazda, fork length: 1,400 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 6.50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,710 kg, total height: 2,140 mm, total length: 2,350 mm, total width: 1,100 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, YALE GLP 20 SVX E2175 – LPG forklifts TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 4.800 mm Closed height: 2.140 mm Free lift: 1.530 mm Mast: Triplex (3F480) Fork length: 1.400 mm Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: Mazda Tyres: Superelastik SE 6.50 - 10 (20%) / 18 x 7 - 8 (80%) Service weight: 3.710 kg Length: 2.350 mm Width: 1.100 mm Year of manufacture: 2008 Operating hours: 8.681 h Condition: working condition Nodpfx Ao Adrz Aeb Aodc EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift Internal no.: 1202072 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, functionality: fully functional, New, fully functional Becker U4.400SA/K vacuum pumps for sale, with a 6-month warranty. We have 2 units available. Worldwide shipping available – request a quote! Ndjdoyzmyyspfx Ab Aoc If you need vacuum pumps, accessories, or any vacuum-related equipment, do not hesitate to reach out. We are happy to assist with sourcing, technical advice, or custom solutions.

Condition: used, operating hours: 14,808 h, total height: 2,850 mm, total length: 9,000 mm, total width: 2,450 mm, Year of manufacture: 2006 Colour: White Empty weight: 4.000 kg - Machine available from: 2026-07-10 - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: AA1/015406 - Operating hours: 14808 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Nodpfe Aazv Ujx Ab Asdc - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Manual control, Offcut conveyor - CNC documentation available: User keys/licenses - Table length [mm]: 3050 - Table width [mm]: 13 - Working range X [mm]: 3110 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Installed length [mm]: 4600 - Installed width [mm]: 6500 - Installed height [mm]: 3400 - Transport dimensions: 9000mm x 2450mm x 2850mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm grinding wheel motor: 18 kW speeds:: infinitely variable (elektronically) total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m Nedpfx Ajz Dvidjb Aedc surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin *

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: AA1/015841, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 6,050 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of slots in tool magazine: 12, total length: 7,250 mm, total width: 2,420 mm, overall weight: 4,800 kg, table length: 6,050 mm, table width: 1,240 mm, Equipment: CE marking, SCM RECORD 100 AL XL CNC machining center, manufactured in 2006. A machine from the renowned Italian manufacturer, SCM Group, designed for professional processing of wood, MDF, plywood, chipboard, and other wood-based materials. Model: RECORD 100 AL XL Year of manufacture: 2006 Weight: 4800 kg Power supply: 400 V / 3 phases / 50–60 Hz Rated current: 62 A Technical specifications Working area / axes: X-axis: 6050 mm Y-axis: 1240 mm Z-axis: 200 mm Rapid traverse X: 60 m/min Rapid traverse Y: 45 m/min Rapid traverse Z: 30 m/min Electrospindle: manufacturer: SCM power: 8.5 kW maximum speed: 24,000 rpm tool holder: HSK-F63 automatic tool changer automatic magazine: 12 HSK-F63 tools Drilling unit: 7 vertical spindles 5 horizontal/angled spindles capability for vertical and side drilling Vacuum system: 2 × Becker VTLF 250 vacuum pump performance of one pump: 248 m³/h at 50 Hz total rated performance: 496 m³/h power of one pump: 5 kW vacuum: 200 mbar Other equipment manual manipulator for machine operation table with vacuum clamping system capability for processing parts with a length of over 6 meters central chip extraction system from the machining head brush guard for the machining head safety mats complete enclosure of the working area CE marking Njdezynkhjpfx Ab Aodc The machine has a large working area of 6050 × 1240 mm, making it suitable for both standard panels and the processing of very long parts. The powerful 8.5 kW / 24,000 rpm / HSK-F63 electrospindle, automatic tool changer, and 12-position HSK magazine allow for the performance of various operations without manual tool changes. An additional advantage is the drilling head equipped with 7 vertical and 5 horizontal spindles, as well as a highly efficient vacuum system with two Becker VTLF 250 pumps with a total rated performance of approximately 496 m³/h. The machine has a solid, industrial-grade construction – weight 4800 kg.

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Ndedpfs Ad Rg Dox Ab Ajc Storage location: Rieth

Condition: used, Year of construction: 1977, Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor Ndsdpeun Dwmsfx Ab Aec -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Condition: used, Year of construction: 2021, machine/vehicle number: 20118-0004, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 250 mm, number of axes: 3, number of slots in tool magazine: 6, total height: 2,100 mm, total length: 3,900 mm, total width: 2,150 mm, overall weight: 2,900 kg, For sale: a very well-maintained and complete Comeva Nicron Vacuum Bars 13/32 CNC machining center, manufactured in 2021. This machine is ideal for flexible interior designers, furniture makers, or door specialists. Thanks to the generous working area of 3,200 x 1,300 mm and the adjustable beam table with vacuum cups, you can work quickly and precisely with solid wood, sheet materials, or frame/door elements. Highlights of this machine: - Beam table: Ergonomic and quick to adjust for various workpiece sizes. Njdpfx Ajz Af Suob Asdc - Powerful main spindle suitable for heavy milling work, grooving, and a drilling unit. - Automatic tool changer: 6-position tool magazine for fast cycle times. - Reliable vacuum system: Includes a high-quality Becker vacuum pump. Compact setup: Freestanding control cabinet on wheels with clear controls. Equipped with Pegasus software. The machine is located at a customer's site and can be viewed in operation; location: Staphorst, the Netherlands.

Condition: new, Year of construction: 2026, The VTLF 2.250 is a medium vacuum, dry-running displacement pump designed to operate on a continuous duty basis. It utilises self-lubricating, graphite composite vanes, requires only minimal maintenance, and requires no oil change. 100% dry-running (oil-less) operation Long vane life Continuous duty rated FEATURES 100% dry-running (oil-less) operation Quiet operation Long vane life Continuous duty rated Air-cooled Single shaft direct drive Compact design Variety of motors available BENEFITS Low operation and maintenance costs No cycling times Quiet operation – no silencer enclosures necessary Ndjdpstty Dusfx Ab Aoc Small footprint for space savings Straightforward construction for fast and easy service on-site to reduce downtime SPECIFICATIONS Volume flow 50 Hz 244 m³/h Vacuum absolute 50 Hz 200 mbar Power 50 Hz 5.5 kW Noise Level 50 Hz 77.0 dB(A) Volume flow 60 Hz 286 m³/h Vacuum absolute 60 Hz 200 mbar Power 60 Hz 6.6 kW Noise Level 60 Hz 79.0 dB(A) Weight 151.0 kg without motor

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells Njdpfxeznd Sko Ab Aodc - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 2017, Year: 2017 Condition: good Nodpfst R Sz Sex Ab Aedc - compressor

Condition: used, Year of construction: 1978, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker SV 2.130/1Baujahr / Year 1978 - SN. B676219 Frequency 50 Hz Speed 2900 min power required 3 kW inlet capacity 130 m3/h max. vacuum 195 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Njdpfxeiwu Eps Ab Asdc On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition Nodpfx Aboz Aqb Ue Ajdc EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis COMEVA MEX V 2100x3260 was manufactured in 2018. It features a working area of 2150 x 3250 mm and is driven by Yaskawa servos. The machine is equipped with a 9 kW ISO30 routing spindle, a 7-position automatic tool changer, and an HSD C-axis for aggregate machining. If you are looking to get high-quality CNC wood machining capabilities, consider the COMEVA MEX V 2100x3260 machine we have for sale. Contact us for further details. Nsdpfx Ajz Rw Txeb Asdc • Working area: 2150 x 3250 mm • Driven by Yaskawa servos • 9 kW ISO30 routing spindle • HSD C-axis for aggregate machining • 7-position automatic tool changer • Automatic lubrication system • Drilling unit for vertical and horizontal drilling • 2 vacuum areas with 4 zones, digitally switchable • Tool length sensor • Pneumatic dust extraction valves • 8 pneumatic material positioning stops • ESA control system • Currently operated using a Fusion 360 post-processor Additional equipment • 2 Becker vacuum pumps (approx. 290 m³/h) • 4x raised vacuum pods for panel routing

Condition: used, Year of construction: 2004, Year: 2004 Condition: good - compressor Ndjdpot R S Aisfx Ab Ajc

Condition: repair required (used), functionality: limited functionality, Year of construction: 2015, operating hours: 14,180 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, gearing type: other, battery capacity: 475 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,654 kg, total height: 2,140 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, LINDE E 16 PH-02 / 386 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.140 mm Closed height: 2.140 mm Free lift: 1.500 mm Mast: Duplex (2F314) Fork length: 1.000 mm Fork carriage: 2A Drive: Elektro Battery: 48V/475 Ah (2015) Charger: ohne/without Transmission: Impuls Tyres: Superelastik 18x7-8 (40%) / 16x6-8 (10%) Service weight: 3.654 kg Length: 2.200 mm Ndedpfxez Aqt Rj Ab Ajc Width: 1.100 mm Year of manufacture: 2015 Operating hours: 14.180 h Condition: in need of repair EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1308362 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 1998, I sell the 3-axis CNC working centre Biesse Rover 13S with beam table, year 1998. Njdpez Ii Axofx Ab Aedc Configuration: 3-axis main spindle HSD 1 grooving saw X-direction Drilling head 10+4+2 spindles Useful working area 1540x1050mm. 1 working field, 2 clamping areas Total power 10kW Pump Becker Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: S/N 320.09.003.17,, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 28 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, Equipment: documentation/manual, CNC Machining Center 3-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.003.17 Year of manufacture: 2017 Tool holder: HSK63F Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, Including 2 vacuum pumps Becker VTLF2.250/0-79, Year of manufacture: 2017 Including loading table and discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Njdpfx Abjxy Abhj Ajdc Slot saw unit for X and Y directions Horizontal drilling in X and Y, two spindles each, drilling unit DH 16, Vertical drilling: 5x in Y direction, 7x in X direction, main spindle approx. 10 kW X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, torque: 4 Nm, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 11 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Machining Center 4-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.002.17 Year of manufacture: 2017 Tool holder: HSK63F Travel distances of the axes: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, C-axis present Including 2 Becker vacuum pumps VTLF2.250/0-79, year 2017 Incl. loading table + discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Groove saw unit in x and y directions Horizontal drilling in x and y directions, two spindles each, drilling unit DH 16 Ndodexy Aa Dspfx Ab Asc Vertical drilling: 5 in y-direction and 7 in x-direction, main spindle approx. 10 kW X-axis speed: approx. 100 m/min, Y-axis speed: approx. 100 m/min, Z-axis speed: approx. 30 m/min

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,946 h, overall weight: 7,000 kg, type of input current: AC, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total length: 7,150 mm, total width: 2,440 mm, total height: 2,400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling Ndsdpfjzgvy Djx Ab Asc • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm) In

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Ndodpfx Aoyr Daweb Aoc Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, number of slots in tool magazine: 16, overall weight: 9,000 kg, Masterwood 2175M5 5 axis machine Nsdpfxsz Td Dvs Ab Ajdc Working area 7.500mm in X Working area 2.200mm in Y Working area 350mm in Z 16,5 HP HSK 63-F liquid cooling Toolchanger 16 positions 2x 250m3 vacuumpump Becker Masterwork CAD-CAM system Beckhoff control Fence on the back and sides Auto lubrication Pre arrangement to install a drilling head cncteam.nl