Used Asco Technology Gmbh Um 600 for sale (86,568)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 Nsdpfx Aswrn Iyefajla (Product photo as an example) The machine is CE-certified.

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Nljdpsyuvq Tefx Afaea Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Nlsdpfxjqfcvie Afaea Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, The equipment is generally project-spec goods and, depending on availability, may also be offered as a showroom/demo machine. Application: Accurate dosing of free-flowing products. Scale Features - User-friendly operation - Fast and easy cleaning - Low maintenance requirements - Tool-free (dis-)assembly of all product-contact parts Njdpfehuahcex Afajla - Low maintenance effort - Corrosion-resistant stainless steel design (1.4301) - Fully integrated control system within machine housing - Continuously adjustable vibration system for optimum product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing container volume: 1.6 l - Weighing range: 10 - 1000 g / 2,500 g - Accuracy: ±0.2-1.5 g - Speed: 60 bags/min (depending on product) - Control panel: 7" touch screen display - Power supply: 1 kW / 230 V / 50 Hz - Dimensions (LxWxH): 1,620 mm x 1,100 mm x 1,110 mm - Machine weight: 380 kg

Year of construction: 2026, condition: new, functionality: fully functional, Applications & Customer Benefits: Nlsdpjxy I N Rjfx Afaoa The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow • Adjustable perforation sizes for customizable screening performance • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 167 kg, total length: 1,400 mm, Applications & Customer Benefits: The ASCO® Drum Extension Compact boosts screening capacity, delivering finer separation, fewer misgrades, and higher overall yield. Ideal for industries needing efficient material screening with extended drum performance. Key Features: • Increased usable screen area (3.3 m²) for higher throughput • Flexible mesh sizes (4–100 mm) and shapes for diverse materials • Optimized material processing for improved separation quality Nsdsxf E I Uspfx Afajla • Robust, long-life design for reliable operation Tech Highlights Ø 1.3 mm · L 1.4 m · Qmax 15 m³/h · Rotation 5–20 rpm · Usable L 0,9 m · Usable screen area 3,3 m² · Mesh size 4 – 100 mm · Weight 167 kg · Mesh shape: square, round, triangular, rhombic, elliptical,...

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, overall weight: 17,750 kg, total length: 8,000 mm, total width: 1,800 mm, total height: 1,875 mm, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, EVOBEND D-Series: Flexibility and speed at the highest level Maximum flexibility and precision The EVOBEND D-Series, equipped with the SmartBend principle, offers unparalleled versatility. Complex profiles that could previously be finalized manually or not made at all can now be produced fully automatically. The innovative bending technology ensures fast and precise results thanks to minimal, simultaneous movements. Highest speed As the fastest long folding machine, the EVOBEND D series works with maximum efficiency regardless of the machine size. Each axis can be controlled individually to optimize the entire bending process. This allows the speed to be adapted to specific work steps and material requirements. Compact design The sophisticated design of the EVOBEND D series saves valuable space in your production hall. With an insertion depth of 1250 mm and a working length of 6400 mm, the D600 machine requires significantly less space than comparable models. This optimizes the production flow and facilitates integration into existing workflows. Safety and efficiency Our machines are fully enclosed, which not only protects the operator but also the machine from external influences. Retractable safety fences and integrated light barriers ensure maximum work safety. The risk of injury is further minimized by dispensing with swing-out bending beams. Robustness and low maintenance Thanks to the use of high-quality components such as precision-manufactured parts and an all-electric drive system, the EVOBEND D series is extremely durable and requires minimal maintenance. The absence of hydraulic components reduces the risk of breakdowns and significantly reduces maintenance costs. Sustainability and low noise With up to 90 % lower energy consumption compared to conventional machines, the EVOBEND D series is both economically and ecologically advantageous. The quiet, electric drive technology also ensures a pleasant working environment and reduces noise pollution. Material-friendly bending technology The innovative bending principle reduces marks and damage to the workpiece to a minimum. The electric clamping beam drive adapts flexibly to different material types and thicknesses, enabling the gentlest possible processing. Top standard as standard Nsdpfx Ajfrlpusfaela Every EVOBEND D-Series machine is equipped with the highest quality components and functions as standard. From the dual-track gripper system to automatic adaptation to material type and thickness - EVOBEND offers uncompromising quality for demanding bending tasks.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 3,550 h, Good day, We hereby offer you, without obligation, a used cable rewinding system (cable drum rewinding machine) with length measuring device, suitable for commissioning and winding cables onto drums of different diameters. Manufacturer: Jakub Thaler GmbH, Germany Model: KU-07 KKS Njdsvl Hcwepfx Afajla Measuring Device Type: ME01 Year of Manufacture: 2019 Operating Hours: only 3,550 hours Load Capacity: 10,000 kg Applicable Cable Diameter: 10 – 80 mm Measurement Accuracy: +/- 0.5% Min. Drum Diameter: 500 mm Max. Drum Diameter: 2,800 mm Max. Drum Width: 1,750 mm Drive Power: 5.5 kW Rewinding Speed: 1 – 85 m/min. Note: The above technical data is taken from the operating manual, manufacturer brochures or other sources for which we cannot guarantee accuracy or completeness. Scope of Delivery: - Cable drum pay-off unit - Layering stand with length measuring device - Cable drum take-up unit with hydraulic power pack - Operator control panel - Machine documentation (available in German only) Application Area and Condition: The system is suitable for rewinding (spooling) power cables, communication cables, and data cables from drum to drum. Cable length is measured during the winding process. The system was operational until the end of 2024, is fully functional and in good condition. We would be pleased if this machine meets your interest. Your Mertens & Frowein GmbH Service Team

Condition: good (used), Year of construction: 2009, rotor diameter: 1,000 mm, rotor width: 1,600 mm, Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as Njdpfx Afoi E S Sqjaola - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Remote Control. Lumber and Platens are combined transported Nsdov S U Tqepfx Afaola 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and with Super drying-quality!

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials Nsdpfx Ajfvx U Hsfajla New model: PS-UV4060 Max Volume For large objects with high passage height Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 90kg Operating display Table movement through screw technology 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 40cm print height printer dimensions: 107x106x102cm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: ready for operation (used), Adept Technology 10332-00600 VIS Board, Serial No. 6545902033, used, minor signs of wear, 100% functional, scope of delivery as per photos Nlodpfx Aji D Tttofaea

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Nodpfxoi Ecl Io Afaela

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Nedpji Ecl Ssfx Afasla

Condition: new, Year of construction: 2022, functionality: fully functional, total height: 3,680 mm, operating pressure: 6 bar, final pressure: -0.6 bar, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, lifting speed: 166 mm/s, 2x Hova column-mounted slewing jib crane  2220847.03  max. load 50kg  Outreach 4m  Individual aluminum jib lengths (depending on load capacity)  Smooth-running trolleys with guide and counter-pressure rollers  Individual load capacities  Swivel range up to 270° also adjustable  Standard with HOVA chain hoist and vacuum lifter  Special solutions through in-house production  Surface-mounted aluminum column swivels  Suspended aluminum column swivels  Telescopic swivel arms  Articulated arm swivels  Mobile version for transportation by forklift or crane 2x HOVAMAT vacuum suction cups HV 50kg/90°  2220847.01  Horizontal and vertical transportation of panels of all materials  Individual load capacities with overload protection  Infinitely variable lifting speed 0-10 m/min  Operating voltage 1x230V/50Hz  Operating pressure min. 6-7 bar filtered compressed air  HOVA special handling handle for 1-hand operation with all commands for the lifting unit and vacuum lifter  Low dead weight due to compact design  Suction plate arrangement with longitudinal and cross beam depending on requirements  Can also be picked up using magnets, mechanical or pneumatic grippers Nlodpfot I S Sljx Afasa  Additional safety with HOVAMAT + and permanent weight monitoring using scales. Lowering cut-off for sleeping chain, load can only be released when set down, display for weight indication possible.  Optional: energy-saving unit 2x vacuum suction cups: €6,000 each 2x column swivel: €6,500 each The sale takes place under exclusion of any warranty.

Condition: ready for operation (used), Adept Technology 10337-15200 Servo Amplifier Control Robot Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Njdpfx Afji D Tt Esaela

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Nljdpfoi D T Iyex Afaea

Condition: new, Year of construction: 2024, Double scissors lifting table type TMH 6000 *Special double horizontal - load: 5000kg - lifting height: 1100 mm - min. height: 240 mm - max. height: 1340 mm Nledpoy E Sdofx Afaoa - length: 10.000 mm - width: 1200 mm - lifting time: appr. 28mm/sec. - motor power: 2,2 kW - power supply: 3 x 400 V/50 Hz + earth - power unit: integrated - controlling voltage for operating function is 24 Volt DC - Sealing in gereral: IP 54 - solenoid valve and push-button-box: IP 65 Technical description: - all surfaces of the metal parts are cleaned, primed with rust-preventing paint and coated with 2-component polyurethane lacquer - base frame and platform are painted in blue RAL 5015, all scissors in orange RAL 2003 - our quotation includes an aluminium safety trip bar and service maintenance bars to lock the table during service and repair.

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis Nlodpfx Aju Smd Ejfaea - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt Nlodpfxounh H So Afaja - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) Nlodperxrrhofx Afaea - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Nodpfjxd A I Aex Afaela Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. Nlodpfjni Awpjx Afaja The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. All documentation is available.

Condition: new, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 150 mm, spindle motor power: 2,200 W, number of spindles: 1, spindle speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – powerful, versatile & in stock! Features (Premium Configuration): 💨 2.2 kW Spindle Motor (water-cooled) – powerful & quiet during continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movements & smooth running 💧 Minimum Quantity Lubrication – extends tool life & reduces maintenance 🌪️ Extraction Hood – clean workspace & clear view while milling 🔄 Rotary Axis D 80 mm × 900 mm – ideal for cylindrical parts, engravings & 3D machining ❄️ Cooling System for Spindle – consistent temperature for long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of small or large workpieces 💻 Control Software Included – Plug-and-Play: connect, start, mill! 📐 Technical Data: Nledpfx Afsxwdkrjaoa * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Travel speed: up to 8,000 mm/min * Guide System: Hiwin linear guides, size 20 mm * Drive: TBI ball screws * Machine table: cast iron T-slot/vacuum table combination * Frame: welded steel base, CNC-machined for flatness & stability 🚀 Your Benefits at a Glance: ✅ In stock – ready for immediate delivery & turnkey upon arrival! ✅ Compact design with industrial precision – perfect for workshops & small batch production ✅ High performance for wood, plastic, aluminum & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible thanks to rotary axis & vacuum table – for both flat and round workpieces ✅ User-friendly control – quick setup & easy operation 🪵 Ideal for: Joineries • Model builders • Sign making • Prototyping • Plastics & aluminum processing 📦 Order now! The CNC4ALL Professional 1200 × 600 offers precision, performance, and reliability in a compact format – in stock & ready to use immediately. 👉 Contact us now for your personalized quote or to arrange a demonstration in our showroom.

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm Njdpfef Ak N Rjx Afaola - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy