Used Asada Die Head for sale (13,022)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system Giodpfx Abjwypp Ij Djt - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Godpfx Aevv R Hzjb Dsit Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length Gedpfjvv R H Usx Ab Dsit ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Giodep H Swdepfx Ab Djt Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: used, Drilling capacity: 35/40 mm Giedpfx Abob N Ahls Dot Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Gijdpfx Aepu A D Asb Dst Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredding material, granulate, etc. Aluminium angled conveyor belt incl. mobile frame Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at bend: 40 degrees each Infeed height from floor: 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminium construction, heavy-duty version! PU conveyor belt incl. cleats and corrugated sidewalls Drive: Motor 0.55 kW (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection class Drive etc. ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch Gsdpfxeyt Ia Do Ab Djit 2-ply, especially cross-stabilized Sidewalls and cleats, as well as belt, are endlessly high-frequency welded In the angled section, the belt is guided on both sides by 4 hold-down rollers each. The belt is produced with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 400 mm, calculated as follows: (top view) lateral arrangement 100+50+400+50+100 mm Demo unit - Available immediately! - Can be viewed under power All prices are net prices plus 19% VAT All information without guarantee, only while stocks last!

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2025112701, Aluminum Inclined Conveyor Belt with Substructure Including adjustable feet and machine feet for leveling uneven surfaces - Infeed height: 500mm - Inclined section: 3,000mm - Discharge height: 2,000mm Gisdpfsydb Rwex Ab Det Design: Aluminum construction profile - Triple-reinforced profile, 135x45mm - Full-surface discharge sheet, 2.0mm galvanized Drive roller and return roller: S235 steel, welded and machined Ø150x620mm, crowned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor, 1.10kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be performed by a qualified electrician) PVC Conveyor Belt DM 10/2 0+005 PVC green Belt width: 600mm Endless, high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. corrugated sidewalls, 80mm high, 50mm wide, flush high-frequency welded 18 pcs. T60 cleats, 430mm long, pitch approx. 508mm, center-mounted Belt material: 2-ply, highly cross-stable Due to the side corrugated edge, the usable belt width is reduced: Usable width 500mm, as follows: (Top view) Transverse configuration: 50+500+50mm

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Gisdpeyhzplofx Ab Dot Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time Gedpfxoyhznno Ab Dsit • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized Gedpsyhznhefx Ab Doit

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness Gijdpfx Abeyhzhzs Dst - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Gijdpfx Aoyhzhusb Dot Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. Gedpfxsyhzhne Ab Djit The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm Godpfxsyhzhbe Ab Dsit - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Giodpfxsxv Apws Ab Djt Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Gsdpfxjb Rnv Sj Ab Dsit Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm Gedpji Apuhsfx Ab Dsit - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Gisdpfed Dy Ugjx Ab Dot Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2015, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded 620 x 420 x 200mm completely welded housing Gedpod Dy U Rofx Ab Deit Ring eyelets for suspension

Year of construction: 2016, condition: good (used), Overband plate magnet Version in VA 1.4301 tightly welded Gsdpfod Dy U Tsx Ab Doit 2.000 x 800 x 200mm completely welded housing Ring eyelets for suspension

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Giodpfxod Dzahs Ab Dst 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded 800 x 500 x 180mm completely welded housing Ring eyelets for suspension Godpfxsd Evl Ds Ab Doit

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including substructure. Dim: 6000 + 620 x 105mm Giedpjd Ra Uaefx Ab Dot Conveyor belt width 500mm PVC conveyor belt incl. Studs, sidewall and sealing tape V2A feeding hopper at the beginning of the conveyor belt. * optional with magnetic deflection roller at the end of the conveyor belt. * optionally available as a climbing conveyor * Special designs in all versions possible.

Year of construction: 2019, condition: new, Aluminium flat belt conveyor without substructure 2500mm flat incl. 4 suspension points dim: approx. 2500 x 300 x 105mm Aluminium construction: Conveyor belt width between corrugated edge 300mm PVC conveyor belt smooth Conveyor belt green, 2-ply, particularly transversely stable endless welded with step connection * antistatic through threads in the fabric of the running side Drive: Motor approx. 0.18Kw, speed 0.5m/sec. Giedpfx Abeff Hf Us Djt * Controllable with frequency converter Connection 220/400V, 50Hz Protection class IP54 Drive, motor control optional