Used 1999 Chambon 800 for sale (8,815)

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame Bedpfofm T Eusx Amyslk - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm Bodpfx Aeyv Epvemyjlk • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, HAHN + KOLB ZL 800 is a lapping / fine grinding machine engineered for precision, high accuracy and reliable operation. Capacities: max wheel Ø 810 mm, max workpiece length 250 mm, carrier root Ø 306 mm; upper and lower wheels 4 steps, 30 t/min–84 t/min. Main specs: main motor 3.0/4.0 kW, total power 11 kW, machine weight approx. 3500 kg, footprint L1720×W2100×H2100 mm. Accessories: set of grinding wheels, coolant system. Delivers tight tolerances; typical applications include automotive, watchmaking, machine tools, aerospace and medical. Bljdozqbh Uopfx Amyjk

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231636, used CNC sliding head lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Bledpfezp Ighjx Amyjk Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 1999 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1999, machine/vehicle number: IntNr231509, A Miyano BNE-51S CNC lathe with IEMCA BOSS 552-HD bar feeder is for sale. Year of manufacture: 1999 Control: FANUC Series 18-T (dual-channel control) Technical Data Max. bar diameter: 51 mm Max. turning length: approx. 125 mm Travel paths: * X1 / X2: 150 mm / 115 mm; Z1 / Z2: 380 mm / 125 mm Y-axis: +/- 40 mm (upper turret) Spindles (main & sub spindle): Speed range: 135 – 5,000 rpm (both spindles) Drive power: 11 kW / 15 kW (main spindle) C-axis: 0.001° on both spindles for complete contour machining Tool system (2 x turrets): Turret 1 (upper): 12 stations (all live, including Y-axis) Turret 2 (lower): 12 stations (all live) Live tool speed: max. 3,200 rpm Bsdpfxjzp Ifqj Amyjlk Bar feeder: IEMCA BOSS 552-HD Bar diameter range: 5 mm to 51 mm Bar length: up to 3,200 mm Chip conveyor Batec fire extinguishing system The machine can be inspected under power by prior arrangement. Technical data and specifications are subject to change and prior sale excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,637 kg, opening width: 396 mm, total width: 912 mm, total length: 1,960 mm, total height: 1,598 mm, cutting force: 120 t, Alligator Shear JMC 800 HD with hydraulic top jaw Blodpfx Aozp Hfismyjk The 800HD alligator shear is a fast and powerful metal shear with a hydraulic top jaw, making it ideal for all cutting and cleaning operations. • 813 mm long blade for large scrap pieces • 120 tons of shear force for powerful cutting performance • Ideal for car radiators, heating elements, and mixed scrap • Control for repeated single cuts for efficient operation • Robust McIntyre construction for long-term reliability

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package Blsdpfxox D Nd Ds Amysk • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 Bjdpox D Ndwsfx Amyelk • Counter spindle slide with cross stroke, C3, tailstock Additional equipment • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: good (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 8,000 mm, conveyor belt width: 800 mm, total length: 23,000 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, ID43709 MACHINE: Telescopic Boom Conveyor BRAND: FMH Conveyors Best Reach TYPE: BR3150-800 YEAR: 2018 LENGTH RETRACTED: 8m LENGTH EXTENDED: 23m Blodpfx Amowhdd Nsysk

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. Bodpfx Amozrd Sloyjlk A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Bodpfozpwwpsx Amyjlk Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: Bodpfezpwu Ujx Amyslk • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Bjdpfx Aewrm Sdsmyslk Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates 4 motors total power 96kW Condition very good ! Available immediately

Condition: like new (used), Like new, it can be purchased with VR 800 or separate, available now, more info privat Bedpfx Aezq Su Ssmyslk

Condition: used, Travels 2.240 x 420 x 480 mm with an SK 40 DIN 69871 A spindle running 60–6.000 rpm. Controlled by a HEIDENHAIN TNC 430 PA with Heidenhain LS 186 linear scales on all three axes and Deutsche Star ball screws. Tool changer for 22 SMK tool pockets. Equipped with through-spindle coolant at 20 bar, external band filter unit, hinged-belt chip conveyor and a B axis. The 2.240 mm X travel is laid out as two 700 mm clamping zones for pendulum machining. Bjdpezpbm Uefx Amyjlk

Condition: new, Year of construction: 2024, machine/vehicle number: TR0067_TA8, New compressed air refrigeration dryer KAESER TA1A with energy-saving SECOTEC control. with electronically controlled condensate drain with cold storage Year of construction: 2023 Bljdpfx Amohu R Hnoyjk Technical data: Flow rate: 0.80 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 43°C max. Compressed air inlet temperature: + 55° C Compressed air connection: G 3/4" Dimension (W x D x H): 630 x 484 x 779 mm Weight: 80kg electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Blodpozn H D Nsfx Amyjk Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: used, mileage: 462,000 km, power: 309 kW (420.12 HP), first registration: 06/2006, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: automatic, emission class: euro4, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, lifting mechanism, and steering axle – Fassi 800, 6x hydraulic, and fly jib, 6x hydraulic – grab lines. Bsdpfx Ajzhhwkomyelk Suspension: Leaf spring and air suspension.

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment Bodpfx Amsw H Rq Hsyelk - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Year of construction: 2004, condition: good (used), TR 800 LIGNUMA circular sawmill - for prisms - user manual – feed on the inverter TECHNICAL PARAMETERS: horizontal clearance 480 mm vertical clearance 300 mm Bledoktg Shopfx Amysk min. length of the processed material 1300 mm cutting width 65 - 340 mm height of sawn material 10 - 280 mm the ability to work on 2 and 4 discs type of saw Ø 800 mm power of the main drive motor 37 kW power of the feed drive motor 1.1 kW length of the feeding table 3200 mm receiving table length 2500 mm total length of the machine 7200 mm machine width 1000mm machine height 1060 mm weight 1850 kg The main advantages of the machine: – stable structure – produced by the Polish reputable brand LIGNUMA – a leader among sawmill manufacturers - recommendable – for every professional

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: diesel, color: green, empty load weight: 2,300 kg, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: hydraulics, RA 800 | Mini Asphalt Plant & Asphalt Recycler for On-Site Hot Mix Production Process RAP (Reclaimed Asphalt Pavement), heat materials evenly with a diesel-fired system, and deliver consistent hot mix wherever the job requires — from municipal streets to highways and industrial sites. Designed for pothole repair, asphalt patching, crack filling, and road resurfacing, it is the ideal solution for fast, cost-effective pavement maintenance. The TICAB RA 800 combines the power of a mini asphalt plant with the efficiency of an asphalt recycler, allowing you to produce high-quality hot mix asphalt directly on site. 🔧 Key Features On-site RAP recycling and hot mix asphalt production Output up to 800 kg/h for medium-scale repair works Diesel-fired heating system with precise temperature control Compact, mobile design for easy transport and field operation Supports bitumen emulsion, tack coat, and recycled asphalt pavement Durable construction for long-term, heavy-duty use ✅ Applications Asphalt recycling and RAP processing Pothole repair, patching, crack filling, and resurfacing Municipal roads, highways, parking lots, driveways, bike paths, and industrial pavements On-site hot mix production without the need for a stationary plant 🚀 Why Choose the RA 800? It’s a versatile, reliable solution for contractors, paving companies, municipalities, and civil engineering teams focused on productivity and pavement durability. The RA 800 reduces material costs, eliminates transport delays, and enables crews to work efficiently with fresh hot mix asphalt anytime, anywhere. Bodpox Uqfyjfx Amyjlk 📩 Contact us for pricing, delivery options, and full technical specifications.

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Bedpfx Aov Amrysmyslk Total weight: 4250 kg (actual) Very good condition

Condition: good (used), LDS V830-335T Electrodynamic Vibration Test System with SPA10K CE and VENZO 800 Description For sale is a used electrodynamic vibration test system from Ling Dynamic Systems (LDS) consisting of: LDS V830-335T Shaker LDS SPA10K CE Power Amplifier DTC VENZO 800 Vibration Controller The system is suitable for professional vibration, shock, and environmental testing in research, development, quality assurance, as well as fatigue and material testing. Bledpoznlzyefx Amyjk Special feature of the controller: 8 activated measurement and control channels Activated in 2015 Integrated charge amplifier Sine Random (noise) Shock Resonance Search Dwell & Tracking Transient Capture Technical data, shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V830-335T Design: Air-cooled electrodynamic shaker Sine force: 9,807 N peak Random force: 9,807 N RMS Maximum travel: 50.8 mm peak-to-peak Maximum velocity: 2.0 m/s Maximum acceleration sine: 735 m/s² (75 g) Maximum acceleration random: 588 m/s² (60 g) Frequency range: DC to 3,000 Hz First major resonance: 2,250 Hz Armature diameter: 335 mm Maximum test specimen weight: 160 kg Cooling air requirement: 0.245 m³/s Power amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Model: SPA10K CE Sine output power: 10,000 VA Maximum input power: 19.41 kVA Supply 50 Hz: 380 / 400 / 415 / 440 V Supply 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Mains voltage: 400 V ±6 % Equipment: LCD display Numeric keypad Master gain control Emergency stop Integrated air cooling Protection and monitoring systems Controller DTC VENZO 800 Vibration Controller Dactron Dual-DSP Shaker Control System 8 activated measurement and control channels Integrated charge amplifier Activated in 2015 Scope of delivery LDS V830-335T shaker with swivel frame LDS SPA10K CE power amplifier DTC VENZO 800 controller Dactron Dual-DSP controller Connection cables Software CD System manuals Calibration documents (available) Condition Used. Normal signs of wear and tear due to age and use. Scope of delivery as shown in the pictures. Pickup or shipping by freight forwarder by arrangement.

Condition: excellent (used), Year of construction: 1999, Arburg 420S-800-350 Clamping force: 80 tons Year of manufacture: 1999 Screw diameter: 40 mm Tie bar distance: 42x42 cm Blodpjx I N S Ejfx Amyok Control system: S Including conveyor belts

Condition: used, Year of construction: 2007, screw diameter: 40 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 cc Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Bledpfx Amezqarxeyjk Ejector stroke: 150 mm Weight: 3180 kg Year of manufacture: 2007 Control system: Selogica Tooling: 2 x hydraulic core 5 heating zones for the mold Rotameter