Used **Used Haas** Turning Centre for sale (51,995)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block Rcjdpfx Aozwd Auohcjf • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button Redpfx Aozh Hbnohcscf • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED Rsdpfx Aheuq Iwpscjcf PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 4,006 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HAAS Mini Mill was manufactured in 2015. It features a maximum spindle speed of 6,000 rpm and a factory-raised Z-axis providing additional clearance for 4th axis applications. The machine has an X-axis travel of 406 mm, Y-axis travel of 305 mm, and Z-axis travel of 456 mm. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Table size: approx. 914 × 305 mm • Machine options/features: • 4th axis drive/preparation • Rigid tapping • Upgraded coolant pump • Factory raised Z-axis by +100 mm (additional clearance for 4th-axis applications) Rcsdpfx Ahjy Tamwocef Additional equipment • Haas HRT160 simultaneous 4th axis (rotary table) • 4x LANG MakroGrip 77 vises • 4-axis fixture/cradle for the 4 vises Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical Redpfx Aeza A Enohcocf • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HAAS, This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10" chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information. Rcsdpfx Ajx H Uzvshcof • Tailstock • 12 x VDI40 • Toolsetter • Conveyor

Condition: used, Year of construction: 2011, controller manufacturer: Siemens, controller model: C200-4D SL, _____ Description: Year of manuf. : 2011 Control : Siemens C200-4D SL In General: Year of construction:2011 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Redsy Sq T Sepfx Ahcscf Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Rcedpfx Ajzig Tmjhcef Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,982 h, functionality: fully functional, Haas VF-8/40, year of manufacture 2008 The machine was purchased in 2008, is fully functional, and can still be used as normal. All tools and accessories are included. Further technical details can be found in the attached images. Viewings can be arranged by appointment if interested. Redpfx Ahsxcvz Hscjcf

Condition: like new (used), Year of construction: 2022, operating hours: 2,085 h, turning diameter: 240 mm, spindle motor power: 11,000 W, spindle speed (min.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 142 mm, travel distance Z-axis: 165 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 2,500 rpm, type of input current: three-phase, total height: 2,700 mm, total length: 3,590 mm, total width: 2,610 mm, overall weight: 5,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Front set Double SPindel Turning Center. with 2 spindle, 2 rew.head, with DRIVEN tools, and C axis, 2 linear robots. Machine is almost new, we used only 2000 hrs. This is the FULL-FULL version of the machine, with two side feeders. collet + 3 jaw chucks. Chain conveyor. FANUC 0ITD control. machine bought new from Takisawa dealer in Hungary. ( SZIMKER ZRT ) RAKU-RAKU MONITOR. Redpfx Ahjrzq N Uscscf

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg Rsdpozwxz Eofx Ahcjcf T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 9,554 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details. Rodey R Dikspfx Ahcjcf • Condition: In good condition • Usage: Motion Time 54,567 h; Servo Time 62,795 h • Spindles: Dual spindle (sub-/counter spindle; rarely used) • Turret: 12-station bolt-on turret (BMT65 style) • Capabilities: Y-axis milling, live tooling • Electrical: 360–480 V, 3-phase, 50/60 Hz; Full load amps 40 A; Largest load 70 A; Short-circuit interrupting capacity 10,000 A Additional equipment • Chip conveyor (Jorgensen) • Mist collector: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals • Samchully MH-206V1 as a counter-spindle chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Rcjdpewrfamefx Ahcof

Condition: excellent (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, spindle motor power: 7,000 W, bar diameter (max.): 35 mm, overall weight: 3,800 kg, I am selling my Dugard Eagle 32 CNC machine as I am retiring and no longer need it. This machine has been well-maintained and is in excellent working condition, making it a great addition to any workshop. Slovenia Rsdpfju Sra Ejx Ahcecf 8-Axis

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, Rcodpfjxqyg Nsx Ahcsf FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: used, Year of construction: 2008, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Haas VF3YT/50 CNC milling machine. Ideal for precision machining of metals and other materials. Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-660mm, Z-635mm Table: 1372mm x 610mm Rapid traverse rate: 18 m/min Table load: 1814 kg Spindle taper: SK50 Spindle speed: 7500 rpm Spindle gearbox: 2-speed Rcjdpfx Ahezwhlgjcsf Spindle power: 22.4 kW Number of tools in the magazine: 30 pcs Machine weight: 7.5 t Dimensions: L x W x H 3.5 x 2.4 x 2.9 m The machine is equipped with: - Renishaw OMP40 workpiece probe - TSC internal spindle cooling - Automatic chip conveyor - Programmable coolant nozzle - Side tool magazine - Rigid tapping - Macro - HSM high-speed machining option - Increased memory up to 16MB It is possible to equip the milling machine with a 4th-axis rotary table. The machine has been serviced, is in good working order and ready for operation. The milling machine can be inspected and tested at our company's premises. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Rcedpfx Aowbd Hqohcsf Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. Rcedeyftdfopfx Ahcjf

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Rcsdpfxonxkcqo Ahcjf Stationary steady Guarding Lighting Coolant system

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. Rcedpsym N Ehsfx Ahcsf All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information.

Condition: used, Year of construction: 2010, Haas VF3 CNC Vertical Machining Centre with Haas Control. S/No. 1081025 (11/2010), Table size 1220mm x 470mm, 20 Tool ATC, BT40 Spindle Taper, Swarf Argur. Rsdpfx Ahezwn Inecjcf Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: refurbished (used), Year of construction: 2007, turning length: 5,200 mm, turning diameter over cross slide: 1,140 mm, turning diameter: 1,140 mm, spindle motor power: 90,000 W, spindle speed (max.): 1,000 rpm, spindle bore: 245 mm, travel distance X-axis: 920 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 5,370 mm, mount diameter: 100 mm, rotational speed (max.): 3,200 rpm, torque: 730 Nm, spindle nose: B20, Equipment: rotational speed infinitely variable, WFL Millturn M120/5000 Redpfxoul S Eyo Ahcscf CNC TURNING-DRILLING-MILLING CENTER TYPE M120 MILLTURN WITH TAILSTOCK AND SINUMERIK 840 D CONTROL SYSTEM

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) Rcodpstt Da Iefx Ahcjf MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations Redszhwx Dspfx Ahcscf • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1110809, HAAS Mini Mill 2 CNC Machining Center – Year of Manufacture 2014 For sale: a HAAS Mini Mill 2 CNC vertical machining center from 2014. This compact and versatile machine is suitable for precision machining of small to medium-sized workpieces and is widely used in machine construction, supply industries, and general machining. Technical specifications: Manufacturer: Haas Rcodozai T Sepfx Ahcjf Model: Mini Mill 2 Year of Manufacture: 2014 Control: Haas CNC Control Travels (X/Y/Z): approx. 406 x 356 x 508 mm Tool changer: 10 positions Taper: CT40 Coolant system available Special features: The machine was taken out of production approximately 2 years ago and has not been used since. It was fully operational before being taken out of service. The control system has the latest available Haas software update. The machine is offered complete, including standard equipment and tooling. Condition: The machine is in good optical and technical condition. The machine has been fully inspected by a Haas dealer. Availability: The machine is available immediately. Inspection is possible by appointment. Please contact us for additional information, photos, or a price quote.