Used Wts 375 for sale (699)

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Dodpfx Aisz I Sbdsljku Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1995, used, good condition manufactured by Luftus type LRM - WTS built in 1995 Masch.-No. 950071 for chips low speed ca. 1400 rpm motor 7,5 kW connection diameter 300 mm pressing pa. 2000 m³/h Dodpfx Aijvwfbpelsku air capacity 6000 m³/h steel wheel required space ca. 1200 x 800 x 1200 mm weight ca. 250 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: good (used), functionality: fully functional, machine/vehicle number: 91014236, Year of construction: 2002, operating hours: 65,535 h, load capacity: 1,000 kg, lifting height: 6,500 mm, free lift: 2,050 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, battery capacity: 375 Ah, battery voltage: 48 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 2,664 kg, Equipment: sideshift, Jungheinrich ETV 110 Reach truck, year of manufacture 2002 with a Triplex mast Details: Jungheinrich ETV 110 Year of manufacture: 2002 Work hours (h): 65535 Mast type: Triplex Lift height (mm): 6500 Freelift (mm): 2050 Build height (mm): 2700 Attachments: Sideshift Lift capacity (kg): 1000 Fork length (mm): 1150 Weight (kg): 2664 Additional hydraulic vehicle: AH1 Additional hydraulic mast: AH1 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2019 Battery capacity (Ah): 375 Battery voltage (V): 48 Accessories: Load guard. Comments: Full freelift. Dksdpfx Aisy H D Dasleu

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dkedpfx Aoz Iwv Tsilou Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Own weight: 1,500 kg Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Safety light at the front formerly a Jungheinrich full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Year of construction: 2021, condition: as good as new (ex-display), creasing- folding machine dmsDIGITAL 375+375KF Large stacking unit 500 mm Alignment section, creasing module, transfer section Folding unit with two swords Dksdpfx Asnfvvmeilsu double sheet diverter for non-stop operation up to 8,200 sheets/h fast

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Dksdpfez Iynfjx Aileu Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: good (used), Year of construction: 2014, machine/vehicle number: 39272, Max. Size : 375 x 660 mm Min. Size : 105 x 148 mm Paper Weights : 400 g/m2 Paper Weights Min. : 100 g/m2 Dkedpfxog Ngtpo Aileu

Condition: ready for operation (used), Heidenhain UE 112 compact converter ID: 375 715-02 SN: 25026084B, used, in good condition, 100% functional, delivery as per photos. Dksdpfx Aiey Srpbsleu

Condition: ready for operation (used), Heidenhain UE 112 compact inverter ID: 375 715-02 SN: 25026085B, used, in good condition, 100% fully functional, scope of delivery as per photos. Dodpfx Aijy Srphjlsku

Condition: used, Year of construction: 1999, For sale: a well-maintained, used Ingersoll Gantry 500. Travel ranges and working area: X-axis travel: 525 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Working tank (W x D x H): 750 mm x 650 mm x 420 mm (lowerable lifting tank) Table and capacities: Dkjdpfx Aoz D Agcoileu Work table (width x depth): 730 mm x 630 mm Max. table load: 1,000 kg Technology and equipment: Control system: Mitsubishi – 32-bit CNC Generator: 70 Ampere Multipulse Generator C-axis: Integrated, fully functional NC rotary axis in the head Safety: Integrated CO₂ fire extinguishing system and cartridge filter system Space requirements and transport data: Footprint/dimensions (W x D x H): approx. 2,100 mm to 2,450 mm x 1,750 mm x 2,600 mm Machine weight: approx. 4,800 kg (without filter system and peripherals)

Condition: used, Year of construction: 2017, grinding length 800 mm grinding width 400 mm grinding height 375 mm dimensions of grinding wheel 300 x 50 x 76,2 mm max. table load 700 kg Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery Dkedpfxsz Ebv Ss Ailou only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. Dodpfx Aiozlz Svoljku • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 19,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2013, functionality: limited functionality, machine/vehicle number: 105032, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard integrated automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size A5 - Maximum spindle speed: 6,000 rpm - Spindle power (100%/40% duty cycle): 18.1 / 13.9 kW - Spindle torque (100%/40% duty cycle): 77 / 59 Nm Tool Turret with Driven Tools - Tool holders according to DIN 69880: 12 positions - BMT65 - Maximum tool length including holder: 190 mm - Maximum tool speed: 6,000 rpm - Maximum torque: 27 Nm (10% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4,350 mm (with chip conveyor), Width = 1,600 mm, Height = 2,500 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical Design: Optimised for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy on X and Z axes ±0.001 mm, Haidenhain linear scales - Main Spindle: High power output and wide speed range - In-process Control: Marposs T25 measurement probe - Automated Loading/Unloading: Parts are automatically loaded and unloaded by integrated automation - Live Tooling: Capable of drilling and milling with driven tools - Tool Life Monitoring with Sister Tool Management - Chip Conveyor, Coolant System, Switchable Dual Cartridge Filter, High Pressure Pump (15 bar) - Fully Enclosed Work Area, Work Area Lighting - Documentation: Electronic available; paper manual not complete Dkodpfx Aioxxwzteleu Machine Condition: WORKING - Operator panel safety switch is broken

Condition: ready for operation (used), Year of construction: 2008, screw diameter: 90 mm, overall weight: 13,000 kg, clamping force: 120 kN, Blow moulding machine manufactured in 2008. This AUTOMA APEX AT500D features a screw diameter of 90 mm and a clamping force of 120 kN. It has a plasticizing capacity of 200–130 kg/h and a horizontal stroke of 500 mm. If you are looking to get high-quality blow moulding capabilities, consider the AUTOMA APEX AT500D machine we have for sale. Contact us for further details. • Extruder: E904-WT AC • Screw speed: 69 rpm • Extruder motor power: 65 kW Dkedpfsz Hdlrox Ailsu • Heating power: 24 kW • PE/PP plasticizing capacity: 200–130 kg/h • Horizontal stroke: 500 mm • Dry cycle time: 2.4 s • Air pressure: 6–8 bar • Pump motor power: 22 kW • Total installed power: 77–115 kW • Minimum water pressure: 3 kg/cm² • Maximum cycles: 14/min • Number of cavities: 3 + 3 • Distance between axes: 100–135 mm • Maximum container length: 85–120 mm • Maximum container height: 350 mm • Capacity: 1 L • Maximum mould width: 495 mm • Maximum mould height: 460 mm • Mould thickness: 170 + 170 mm • Opening: 265 mm • Condition: Operational

Condition: as good as new (ex-display), Year of construction: 2015, Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Metal sheets to avoid hanging/sagging Dsdpfx Aovzuxfjiljku Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical specifications – Geibel & Hotz FS 840 SD Max. grinding area (mm) 800 x 400 x 375 Travel in X-axis (mm) 800 Travel in Y-axis (mm) 400 Travel in Z-axis (mm) 375 Clamping surface (magnetic) (mm) 800 x 400 Grinding wheel (mm) 300 x 50 x 76.2 Power of grinding spindle motor (kW) 3.7 Dkedpoz Ebvfjfx Aileu Grinding spindle speed (rpm) 1400 Manufacturer Geibel & Hotz Year of manufacture 2008 Control type Cycle-controlled Total power consumption (kW) 12 kW Space requirement (mm) 3600 x 2750 x 2470 Weight (kg) 2700 Condition Used

Condition: ready for operation (used), Cylindrical grinding machine for sale. In good working order and ready for use. The price stated in the advertisement is the net price, to which VAT must be added. This is a universal centerless (cylindrical) grinding machine for external and internal grinding. Max. grinding length: 1000 mm Max. workpiece diameter: 315–320 mm Dkodpfx Aez Hlr Tjileu Center height: 160 mm Grinding wheel up to Ø500 mm Grinding wheel width: approx. 80–90 mm Workpiece spindle speed: 15–375 rpm Longitudinal table travel: 1250 mm Transverse travel: approx. 170 mm Machine dimensions: approx. 4500 × 2075 mm Weight: approx. 4888 kg Control: conventional. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone between 7:00 a.m. and 3:00 p.m.

Condition: ready for operation (used), Heidenhain HR 420 handwheel, part number 375 2639-01, serial number 19931995B, with connection cable. The cable has been repaired/insulated (see photos). Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Djdpozkxhljfx Ailsku

Condition: used, Year of construction: 2015, operating hours: 9,773 h, fuel type: electric, total height: 2,050 mm, total length: 2,900 mm, total width: 1,000 mm, color: red, Empty weight: 1.665 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - Serial number: W41191F00310 - Operating hours: 9773 - Towing capacity: 7000kg Dsdpfx Aez Hbbqjiloku - Number of wheels: 3 Wheels - Options: Full cabin, Work lights, Non-marking tires - Drive: Electric - Battery information: - └ Brand/Type: 3 PZM 375 - └ Battery year of construction: 2015 - └ Capacity: 375Ah - └ Battery voltage: 48V - └ Tray length [mm]: 820 - └ Tray width [mm]: 415 - └ Tray height [mm]: 630 - Transport dimensions: 2900mm x 1000mm x 2050mm (l x w x h) - Transport weight [kg]: 1665kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 375 mm, grinding wheel diameter: 300 mm, grinding wheel width: 50 mm, Equipment: documentation/manual, Very well-maintained ELB surface grinding machine with automatic feed Type: Optimal 6375 ND Year of manufacture: 1988 Grinding area: 600 x 375 x 375 Grinding wheel: 300 x 50 x 76.2 mm Dkjdpfxezxn H Ho Ailou Accessories: Magnetic chuck with adjustable holding force (600 x 350 mm), paper band filter system, operating manual.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 25582, Equipped with: Dkodpszn Aymjfx Ailsu Fanuc 30ia Control Hydraulic System Coolant System Chip Conveyor Pneumatics Lube System Jib Crane Change Gears Mist Collector Transformer Work Light Stack Light Specifications: Extreme Ratio: 10:1 Root Angle Range (B-Axis): -5 deg. TO 90 deg. Equivalent Root Angle Range: -8 deg. to 90 deg. (Equivalent refers to cradle type machine.) Face Hobbing: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -152 mm TRI-AC Cutter w/13 Blade Groups Max. Full Depth: 0.550" Max. Face Width: 1.6" Face Milling: Examples of Maximum Gear Pitch Diameter -35 Degree Spiral -7.5" Diameter Cutter Max. Full Depth: 0.625" Max. Face Width: 1.6" Max. Swinging Base Travel (B-Axis): -5 deg. to 90 deg. Max. Vertical Travel (Y-Axis): -4" to 7" Max. Horizontal Travel (X-Axis): -6" to 4" Sliding Base Travel (Z-Axis): 2" to 12" Machine Center to Work Spindle Face (Fixed): 4.5" Tooth Number: 5 to 200 Inclusive Cutting Diameters: Conventional Face Milling: 1.1" to 7.5" Helixact: 100mm to 200mm Fine Pitch: 102mm to 152mm Coarse Pitch: 152mm only Speeds: B-Axis--Swinging Base (Degrees per Second): 30deg./sec. A-Axis--Work Spindle (Face Milling)(RPM): 0-75 A-Axis--Work Spindle (Face Hobbing)(RPM): 0-375 C-Axis--Cutter Spindle (RPM): 30-500 X-Axis--Horizontal (Inches per Second): 4.92"/sec. Y-Axis--Vertical (Inches per Second): 4.92" Z-Axis--Sliding Base (Inches per Second): 4.92"/sec. Work Spindle: Diameter of Taper at Large End (#39 Taper): 3-29/32" Taper per Foot: 39/64" Depth of Taper: 3" Floor Space: 95.75" x 63.5" Height (less mist collector): 90.75" Approx. Weight: 22,000 lbs

Condition: used, Year of construction: 2005, Overview This KOSME EXTRAFIX 12T is a rotary combination labeller for glass wine bottles, built in Italy in 2005. Five labelling stations - three self-adhesive and two cold glue - work around a 12-plate carousel, so front, back and neck labels in both technologies can be applied in one pass. The machine is rated at 12,000 bottles per hour and has run on 750 ml, 375 ml and 1,000 ml bottles in a winery. It is still installed and under power, and can be visited by appointment. Technical data - Manufacturer: KOSME - Model: EXTRAFIX 12T - Year of manufacture: 2005 - Machine type: rotary combination labeller (self-adhesive + cold glue) - Capacity: up to 12,000 bottles per hour - Container: glass wine bottles, 750 ml, 375 ml and 1,000 ml - Bottle plates: 12 - Labelling stations: 5 (3 self-adhesive, 2 cold glue) - Power supply: 400 V, 3 phases + PE, 50 Hz - Installed power: 7 kW - Weight: approx. 4,200 kg - CE marked Equipment - 3 self-adhesive labelling stations, each with its own control display, label reel unwinder and backing-paper rewinder - 2 cold glue stations with label magazine and glue pallets Djdpfxsz Nc Has Ailjku - Rotary carousel with 12 bottle plates and centring bells - Infeed screw, infeed and outfeed star wheels, bottle conveyor with guide rails - Control cabinet with operator panel - Stainless steel frame with transparent safety guarding Condition Used machine, still installed and connected. Can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) Djdpfx Aijxwvr Islsku # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm Djdsxwvlnepfx Ailjku # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: used, mileage: 114,456 km, power: 85 kW (115.57 HP), first registration: 06/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,400 mm, loading space width: 2,110 mm, loading space height: 400 mm, Year of construction: 2017, Equipment: ABS, central locking, crane, electronic stability program (ESP), soot filter, * 14,900 € Net * Iveco Daily 35S12 Hpi Double Cab Pickup Crane + Tow Hitch + Camera Euro 6 Truck 3.5t * Seats: 3 * 6-speed * Armrest * Radio CD * Front airbags * USB * ABS * ESP * Rear view camera * Electric windows * Electric mirrors * Central locking * Air-suspended driver's seat * Crane Maxilift N50, 500 kg max, Year: 2020 * Pickup bed: 340 l x 211 w x 40 h * Wheelbase: 375 cm * Tow hitch: 3500 kg * Unladen weight: 28 kg * Payload: 1512 kg * Permissible total weight: 3500 kg * Truck registration * Vehicle no. 2 OPENING HOURS Monday - Friday from 09:00 - 17:00 (by appointment...) Dsdez Iitkspfx Aileku CONTACT DETAILS Telephone: WhatsApp E-mail: Transit and customs plates (export number) available from us. Errors, typos, and prior sale are subject to change. Technical specifications and features must be checked separately. The condition of the vehicle is only as agreed upon at the time of purchase, after on-site inspection and written confirmation. Please arrange an appointment.