Used Walther Trowal Vibrator 2 Tubs for sale (78,333)

Condition: ready for operation (used), * Brand: AEG / Aviteq * Model: vibrating chute Itedpfx Aqjywmb Aeush * On stock: 2 pieces * 1 x: length 3000 mm - diameter 500 mm * with: two pieces vibration motors of each 1,3 kW * 1 x: length 5900 mm - diameter 500 mm * with: two vibration motors of 2.3 kW each

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Ijdpfeyvqc Ujx Aqueth

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 Iedpfxotz Dg Uo Aqueth - Commodity code 8419 3200

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Isdpsumvqcjfx Aqueth

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5% Itjdpfx Aqovupdceush

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right Itodpfsu S N R Eex Aqush - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm & Turk heads for squares and rectangular shapes Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Iedeyl Ukajpfx Aquoth Tube length: 4 - 8 m Speed: Up to 40 m/min

Condition: good (used), UV dryer, UV lamp, high-performance UV lamp -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) Iedpfx Aocft T Hequjth -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Ijdpfx Asy D E Risquoth Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment Ijdezdz I Uopfx Aqusth - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: good (used), Polar Mohr R-2 Paper Jogger Machine in very good condition, lightly used. Technical specifications: Maximum format: 820x720mm Stack height: 150mm Weight: 450kg Power supply: 400V Air table Right/left shaking option Tilt angle adjustment Iodpfx Ajzdauzoqusth Jogging frequency adjustment (inverter) Chrome table surface Pneumatically controlled flaps

Condition: used, Year of construction: 2007, functionality: fully functional, volume flow: 300 m³/h, final pressure: 0.5 bar, power: 7.5 kW (10.20 HP), rotational speed (max.): 1,720 rpm, We offer this used Gardner Denver VC 300 (01) vacuum pump, year 2007. BOTH PUMPS – SOLD AS A SET Vacuum range: 0.5/10 mbar (abs.) Capacity: 300/360 m³/h Power (S1): 7.5/9 kW Speed: 1450/1720 rpm Serial number: 2711829 Iodpfjy Id I Uox Aqueth If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOG NUMBER 6024 TECHNICAL DATA - Main motor: 2.9kW - Spindle motor: 0.75kW - Carriage feed motor: 0.75kW - Power supply: 380V - Dimensions (L/W/H): 1600x1100x1200mm - Weight: 891kg Machine equipped with: – 2 tables measuring 300x340mm – Pneumatic clamps – Tables adjustable in two angular planes – Capability for producing longitudinal and round tenons on the tables – Mechanically adjustable table speed and spindle rotation speed – Tables adjustable up/down Itodpfx Aozcu U Tsqush – Tenon width adjustment Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, Itjdpfx Aqeh Anyfouoh new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Itedpfx Ajzdc D Sequeh Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, Itodpfx Aozdcwrequeh each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Year of construction: 1998, condition: excellent (used), Dual fuel burner Weishaupt RGL40/2-A -version ZM-NR Power 500-3450KW: Year:1998 Oil throughput 55-290kg/h With existing fittings Dungs DN65 Shipping possible worldwide. Itodpshl Inmsfx Aquoh Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 2001, condition: excellent (used), Weishaupt GL 30/2-A dual fuel burner -Version Z: Itodpfef Src Rsx Aqush Output 300-2150KW: year of construction:2001 Oil throughput 40-180 kg/h With existing fittings Dungs DN50 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, This listing is for Biomat 2 1200EXH Class 11 Safety Cabinet. The unit is in full working condition and ready for immediate use. Available with or without the stand Caution. The height of the unit including the filtration unit is 1960mm (Without the optional stand) and 2610mm when on the stand (+-10mm adjustable glides) Itodpozc Hthofx Aquoh Overall width 1200mm and depth 1180mm (Note the extra depth). The foot print is square This high-performance recirculating enclosure utilizes dual fan HEPA filtration to deliver dependable workspace containment, protecting personnel and product environments in modern research and bioprocessing laboratories Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](?srsltid=AfmBOoo2CxS6O5SCG0S0zUWDq4xUKCgkGbkylLnULHI4J729cw GPs-bk)] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Itsdpsytgu Tefx Aqueh Handheld remote control

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner, load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 amps. Dimensions: Length: 1940 mm, Width: 1200 mm, Table diameter: 1200 mm. Height when tilted: min. 700 mm, max. 1550 mm. Height horizontal: min. 900 mm, max. 1700 mm. Weight: 1750 kg. Itjdpex Tif Ajfx Aqueh

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Iedpfx Aqsxbhp Housth Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages Iodpfx Aox Izwmsquoth - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: excellent (used), functionality: fully functional, OMT brand reversible impact crusher, model 800 MFI, in perfect condition with base – used. Iodpfey H E Rnox Aqueth

Condition: used, Year of construction: 2009, BAZ cover for Maho DMC63V, year of manufacture 2009 (includes new milling spindle + Y-axis spindle) Heidenhain control BAZ DMC 63 V, year of manufacture 2001 Itodpow D Sp Esfx Aquoh