Used Vulcanic Vulcatherm for sale (45)

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Hfodpfxjxruklo Aiqjn

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered to a customer. We can manufacture this machine for you again on very short notice—customized to your individual requirements if desired. This is a hydraulic heated press with electrically heated plates and a manual sliding table for pressing, laminating, and forming processes involving heat. Base price: €42,000 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine to the specific application. The base machine provides a functional standard configuration—in practice, it is often supplemented with additional features and configured according to project requirements. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table stroke: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling Hfsdpfx Aioy H Dtzsqen ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer paint finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming press applications Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian National Safety Directive NR 12, which is based on and extends these standards. Our key strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Hodpfx Aijfxyh Rjqefn Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Hfsdpsfxygpofx Aiqjn Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 36817, Vulcan 24" OD × 20" Sonic Loop Turret Coiler Winder with Automatic Cut & Transfer – BRAND NEW Hedpszz N Evsfx Aiqsfn The Sonic Loop Turret Coiler is a two-spindle turret-type winding system designed for continuous, virtually tensionless coiling of extruded profiles. The extrudate is fed to the coiler through an ultrasonic sensing dancer system, which monitors the position of the extrudate loop and automatically adjusts the speed of the servo-driven winding spindles. This provides smooth, controlled winding while minimizing tension on the extruded product. The unit is equipped with an automatic cut-and-transfer system, allowing the product to be rapidly transferred from the full reel to a new empty reel without interrupting the coiling process. Technical Specifications Winder Type: Two-spindle turret coiler Maximum Reel OD: 24" Reel Width: 20" Centerline Height: 42" Line Speed: Up to 200 FPM on 8" diameter core Drive: Servo-driven spindles Loop Control: Ultrasonic sensing dancer Cut & Transfer: Automatic Electrical Supply: 380 VAC, 50/60 Hz, 3-phase Condition: Brand New / Never Used The equipment was manufactured and underwent final assembly/testing at the Vulcan facility before shipment. It has never been placed into production and is currently stored and ready for shipment. Original documentation is available where applicable. Available for immediate sale. Inspection and shipping arrangements can be coordinated with the buyer.

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Hfodpfx Asyh Hngjiqen Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers of 10 mm EP-125 eksaş conveyor Drive bearings : UCF type with...

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar Hedpsyuvrdofx Aiqjfn ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Condition: new, machine/vehicle number: DF0238 - Rev.00, pressing force: 20 t, pressure:20 t passage width:400 mm stroke:300 mm Weight of machine approx.:3 t dimensions:2200 x 650 x 2540 mm power capacity:ca. 4,5 kW table plate:400 x 400 mm pestle plate:400 x 400 mm daylight:300 mm table height over floor:950 mm Hjdpfefxyhbjx Aiqjfn :2 - 20 t :S7 1500

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.5 kW (2.04 HP), Equipment: motor brake, TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional with special coating Saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Suction nozzle 2 x Ø 100 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Machine stand in elegant, modern, torsion-free double-chamber welded steel construction Hfsdoqfft Nepfx Aiqon Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 1 Finely planed cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop guide can be used to the left of the saw blade, stop profile can be reversed Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth width 6 mm, no. 3783.20K Mechanical height adjustment of the saw blade guard by handwheel with locking pinion Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE-compliant GS tested

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 Hfjdpfx Aijxabtceqen - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded Hedpfx Aijxabhgeqefn - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional, with special coating: saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Dust extraction port 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German engineering Hedpfxev Hugge Aiqsfn Machine stand in aesthetically pleasing, modern, torsion-resistant, double-chambered, welded steel construction Upper and lower doors secured via limit switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed gray cast iron table Tilting table top up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Fence rail on the left of the saw blade, can be used Fence profile can be folded down Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth spacing 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE compliant GS tested Machine stand, left-hand version Drive motor 1.5 kW / 2.0 HP Weight approx. 210 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm Hedpevymg Esfx Aiqofn · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Availability: short term Storage location: Flörsheim

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Hfedpfjyhznhox Aiqen Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) Hfjdpeyhznnofx Aiqsn • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Condition: new, Year of construction: 2026, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and Hodpfxor Igzco Aiqofn emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages Hedew Nablepfx Aiqsfn · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter: 800 mm Hfodoww Ravepfx Aiqen Belt speed: 1800 m/min Cutting height: 520 mm Cutting width: 780 mm Max. blade length: 5775 mm Min./max. blade width: 15 mm / 40 mm With special lining (optional), min./max. blade width: 10 mm / 35 mm Table size: 1145 x 760 mm Table height: 930 mm Extraction port: 2 x Ø 120 mm Motor power: 4 kW / 5.5 HP Voltage: 400 V / 50 Hz Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 525 kg TECHNICAL DESCRIPTION Robust German engineering Machine frame in a modern, visually appealing, torsion-free double chamber steel welded construction Upper and lower doors protected by limit switches Upper and lower precision bandsaw blade guides APA 2, Size 2 Finely planed cast-iron table Table can be tilted up to 45° Dynamically balanced bandsaw wheels with vulcanized rubber tyres Rip fence can be used on the left of the saw blade, fence profile can be folded down Blade tension indicator 1 bandsaw blade 5775 x 30 x 0.8 mm, tooth pitch 9 mm, No. 3780.30I Mechanical height adjustment of blade guard by handwheel with locking ratchet Cam switch with star-delta starting and emergency stop button Mechanical motor brake with main switch and motor protection relay CE compliant GS tested Machine frame, left-hand version Drive motor: 4.0 kW / 5.5 HP Push-button control, 3 to 4 kW With automatic star-delta start (for 3.0 – 4.0 kW motor), (instead of cam switch) Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS Bandsaw Type BSB 600 Stand in modern steel construction, table top made of thick-walled, heavily ribbed cast iron, massive gray cast iron bandsaw wheels Technology: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed gray cast iron table • Table top can be swivelled up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber coverings • Fence rail can be used on the left of the saw blade • Fence profile can be folded over • Blade tension indicator Hfodpfxjbzmb Ho Aiqen • Mechanical height adjustment via handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height 380 mm • Max. cutting width 570 mm • Table size (W x D) 590 x 810 mm • Table height 905 mm • Wheel diameter 600 mm • Motor power 2.2 kW • Wheel speed 820 rpm • Max. saw band length 4710 mm • Suction nozzle diameter 2 x 100 mm • Machine weight 272 kg • Machine size (L x W x H) 1120 x 750 x 2125 mm Location: Available in stock, Bitburg Top exhibition price Free loading

Condition: good (used), Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation -Total length: 300 mm -1 wire mesh box approx. 350 pieces Hjdpfsb Eu S Ijx Aiqofn -Weight: including box 142 kg