Used Urschel Ra A for sale (67,067)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge Guodpfx Aeugpwnofreh * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz Guedpfjzugwpsx Afroh • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: used, Year of construction: 2002, ORYCON MAINFRAME 980F-09-S-A-EU REV2 This device is used in industrial plastic injection molding for precise temperature control in hot runner mold systems, utilizing multiple independent control modules. Power Supply and Construction • Input voltage: Can be connected to a 3-phase (400V) or 1-phase (230V) network, depending on the internal terminal block configuration. • Chassis (Mainframe): Robust, all-aluminum construction designed for demanding industrial environments. • Chassis capacity: The chassis features a modular design that is backward- compatible with most common industrial control cards of standard dimensions. Gedpfx Afjz Ilg Hsreuh Control Cards (Modules) and Sensing • Control accuracy: Achieves high precision of ±0.5°C (or ±1°F) thanks to Orycon Hot Runner Systems microprocessor control. • Sensor types (Thermocouples): Supports industrial Type J (Fe-CuNi) or Type K (NiCr-Ni) thermocouples. • Unit display: Calibration and value display selectable in Celsius (°C) or Fahrenheit (°F). • Operating modes: • Closed Loop: Automatic PID control based on thermocouple feedback. • Open Loop (Manual mode): Percentage-based power control (suitable for emergency completion of work if a mold thermocouple is damaged).

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V Gedjnwmt Iopfx Afrjuh - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Condition: used, Motan Central Drying & Vacuum Conveying System – LUXOR A 400-E + 4x LUXORBIN + Blowerstation + 2x F30 Filters Guedpfx Afez Rvfaorsh This energy-efficient set includes a 400 Dry Air Generator with ETA plus® technology , 4 insulated drying bins with a total capacity of 800 liters , a 4.3 kW central vacuum blower station , and 2 central dust filters. System Components & Technical Specifications: 1\. Dry Air Generator (Trockenlufterzeuger) 1. Manufacturer: Motan Holding GmbH (Germany) 2. Model: LUXOR A 400-E (with ETA plus® energy saving unit) 3. Year of Manufacture: 2017 4. Serial Number: 768T0016259A1700151 5. Dry Air Flow Rate: 400 6. Power Supply: 400 V / 50 Hz (3PE), 27 A 7. Backup Fuse: 35 A 8. Weight: 520 kg 2\. Drying Bins (Trockentrichter) – 4 Units (Total 800 L): 1. 2x Motan LUXORBIN A 150-L 2. Year of Manufacture: 2019 3. Capacity: 150 liters each 4. Voltage: 230 V / 50-60 Hz 5. Weight: 135 kg each 6. 2x Motan LUXORBIN A 250-L 7. Year of Manufacture: 2016 8. Capacity: 250 liters each 9. Voltage: 230 V / 50-60 Hz 10. Weight: 185 kg each 3\. Central Vacuum Blower Station (Blowerstation) 1. Manufacturer: Motan Holding GmbH 2. Model: Blowerstation CAN 4.3 kW 3. Year of Manufacture: 2019 4. Serial Number: CS02B343G6418194A1905805 5. Power Rating: 4.3 kW 6. Voltage: 400/480 V, 50/60 Hz (3PE), 10/10.4 A 7. Weight: 175 kg 4\. Central Dust Filters (Zentralfilter) – 2 Units: 1. 2x Motan Zentralfilter F30 2. Years of Manufacture: 2018 & 2016 3. Control Voltage: 24 V DC 4. Compressed Air Supply: 5–7 bar (pneumatic filter cleaning) 5. Weight: 25 kg each

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects Gsdst Ul Dnepfx Afrouh containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° -air gage measuring -for liners Gjdpfx Afoy Umatereuh -diameter app 200mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Gujdpfoy A N U Aox Afreh Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Godpfx Aszurz Hjfrsuh Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31 Gedpfxszqz Nxs Afreuh

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Godpszvwilefx Afrsuh Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Godpfx Afszvwh Isrouh Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Godpfsy H Dzfjx Afrsuh Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Gujdpfxjv Rm Iws Afroh

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools Gusdpfxezzbcyj Afroh

Condition: excellent (used), Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp Gujdpfow Udtcjx Afrjh -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Condition: excellent (used), mileage: 298,000 km, power: 331 kW (450.03 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,700 mm, Year of construction: 2015, operating hours: 4,414 h, Equipment: crane, electric window regulation, trailer coupling, = Additional options and accessories = - Air suspension - Coupling - Heavy duty engine brake - PTO - Visor - Xenon lighting = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Steering Gsdpfxjw Hrn Te Afreuh Weights Empty weight: 25.630 kg Carrying capacity: 6.370 kg GVW: 32.000 kg Functional Make of bodywork: FASSI F 1100 RA.2.28 HE + JIB CE mark: yes Condition Technical condition: very good Visual appearance: good Financial information Price: On request

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 300 mm, table length: 1,200 mm, Equipment: motor brake, Houfek Thickness Planer A 630 Year of manufacture: 2025 Motor: 7.5 kW (11 HP) Electric table lift Automatic table positioning to specified height Feed table - length 1200 mm Automatic star-delta motor start Electromagnetic brake Infinitely variable feed speed adjustment, 4 - 19 m/min Segmented pressure bar at the infeed, pressure bar at the outfeed Feed rollers: 1x grooved at the infeed + 2x steel rollers at the outfeed 4-point table mounting Min./max. workpiece thickness: 3 - 300 mm Options installed on this machine: Segmented grooved infeed roller Two rubber-coated outfeed feed rollers Cutterblock type "Tersa" Planed thicknessing table 1200 mm Godpfex Hy Nljx Afrsuh Outfeed table extension 1200 mm

Condition: used, machine/vehicle number: 008270, X axis working area: 4320 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Guedpjzw Dxcefx Afroh Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 22

Condition: excellent (used), 200030A) C.N.C. WORKING CENTER "NESTING" with 3-axes "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with Tools storage plates Storage (revolver-type) with 8 folds (on Y-axe) Max. useful working area (X - Y - Z) mm 3100 x 1560 x 60 Godpszygiiefx Afrjuh Vacuum pump 1 x 300 m3/h Separate electric and command cabinet WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200030B) UNLOADING with roller conveyor (length approx. 3,500 mm)

Condition: excellent (used), "NESTING" CELL with 3-axes (X-Y-Z+ C-axis capability) CNC working Center, composed by: 200029A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type A 1563) also for thin panels, with scissor table, movable arm (NC positioning Sweeping Arm) with vacuum suction cups, 200029B) CNC "nesting" 3-axes (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control (WRT) with Software bSolid (3D CAD-CAM) + bNest (SOPHIA - IoT Connection) Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + 2nd storage (revolver-type) with 8 folds (on Y-axe) Gedozxrnbspfx Afrjuh Max. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 31,21 WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200029C) AUTOMATIC OUT-FEEDING SYSTEM (type 1531) with motorised belt (length mm 3740)

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Gusdpfxjgwg Uds Afroh

Condition: used, machine/vehicle number: 008560, X axis working area: 3140 mm Y axis working area: 1260 mm Gsdpfszvwtqjx Afreuh Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 13

Condition: excellent (used), mileage: 173,000 km, power: 537 kW (730.12 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 3,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, Year of construction: 2017, operating hours: 4,900 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, trailer coupling, = Additional options and accessories = - Air suspension - Alloy wheels - Aluminium fuel tank - Central lubrication - Coupling - Low-noise - PTO - Radio/CD player - Refrigerator - Reversing camera - Speed limiter - Toolbox - Vehicle heater - Visor - Xenon lighting = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Steering Weights Empty weight: 30.485 kg Carrying capacity: 3.515 kg GVW: 34.000 kg Functional Crane: FASSI F1650 RA.2.28 XHE- DYNAMIC + JIB, year of manufacture 2016, behind the cab Make of bodywork: FASSI F1650 RA.2.28 XHE- DYNAMIC + JIB CE mark: yes Condition Technical condition: very good Guedpfxsutvm De Afrjh Visual appearance: very good Damages: none Financial information Price: On request

Condition: used, Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. Guodpfevyhl Nox Afrsh The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.