Used Steimel Rfmh2/36 for sale (4,582)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 470 mm, spindle bore: 150 mm, turning diameter over bed slide: 750 mm, turning diameter over top slide: 470 mm, feed length Z-axis: 2,000 mm, spindle speed (max.): 1,030 rpm, Center height on the machine bed: 360 mm Bwsdoz Irayjpfx Afgou Width of the machine bed: 450 mm Width of the recess: 450 mm Maximum turning diameter on the machine bed: 750 mm Maximum turning diameter on the recess: 910 mm Maximum turning diameter on the carriage: 470 mm Spindle bore diameter: 150 mm

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, total width: 799 mm, total length: 1,857 mm, total height: 1,144 mm, overall weight: 212 kg, Machine function and use The FULLMATIC 36 varnishing machine is used for full-scale varnishing of paper sheets. It is equipped with a table for manual feeding the sheets of paper through varnishing module and vacuum conveyor of varnished sheets. On the end of machine is located fixed unloading table. Simple controls of machine allows to continuous regulation of varnishing speed. Varnished sheet of paper is after hardening of varnish using UV radiator fed on unloading table. TECHNICAL PARAMETERS Input and output material Specification of paper: Bjdszzk R Tspfx Afgewu Max. paper format: 360 x 720 mm Min. paper format= Manual Feeding: 150 x 200 mm Min. paper format= Automatic Feeder B3: 200 x 340 mm Paper weight: 115-350 g/m2 Specification of varnish: Types of usable varnishes: UV viscosity 30-65s (DIN 4mm flow cup viscosimeter) Application quantity 4-15 g/m2 Machine parameters Floor area: 0,8 x 1,9 m Output parameters Power - Manual sheets loading: 5-20 m/min - Automatic sheets Feeder B3: 5-15 m/min - varnishing speed=UV varnish: 5-20 m/min - varnishing speed=Water varnish: 5-8 m/min Varnish temperature: min 20°C The maximum varnishing speed is dependent on substrate and varnish specifications, ambient temperature, UV lamp power and varnish curing time. Electrical circuit Power consumption 5,5 kVA Machine voltage (basic variant): EU 3xNPE 400/230V 50Hz Control voltage of machine: 24 VDC Rated current: 10 A Recommended value of protection: C 16 A Lead-in cable: 5G 2,5mm² Cu , 5 m Pneumatic circut Pressure pneumatic circuit: 0,6 MPa; Max. 81 l/min (50 l/min) Recommended connection: Polyurethan (polyamide) tube ø8 mm Pneumatic circuit of the feeder: over-pressure +0,6 Bar Control system The control unit for operating and controlling the machine is developed in Komfi Operation conditions The machine is intended for smooth run under temperature conditions ranging from 15 C to 40 C (59°F to 104°F). The acceptable relative air humidity level is from 20  to 80 , non-condensing relative humidity. The machine allocation should not be higher than 1000 m above the sea level. It is not allowed to place the machine into explosive or dusty environment. Working mode The machine is intended for average monthly capacity according to technical specification.

Condition: used, Marel I-Cut 36 Portion Cutter The Marel I-Cut 36 portioning machine has been specifically developed for the precise cutting of uniform portions. This machine is ideal for portioning and slicing meat, fish, and poultry. The I-Cut 36 is a highly efficient slicer capable of making up to 1,000 cuts per minute. The machine is height-adjustable, allowing it to be easily integrated into an existing production line. Its hygienic design ensures that the product only comes into contact with the cutting chamber, knife, and conveyor belt. This portioning slicer is completely manufactured from stainless steel. Bjdpfx Aoz Dg Sisfgowu Production capacity: Up to 1,000 cuts/min Maximum product dimensions: 900 × 300 × 150 mm Belt speed: 20–500 mm/s Accuracy: 97–98% Program memory: Up to 84 programs Cutting angle: 45° and 90° Conveyor belt working width: 300 mm Infeed and outfeed height: 1,010 mm Voltage: 400 V (3 + N, 50 Hz) Power: 8 kW Weight: 875 kg Year of manufacture: 2010 Machine dimensions (W × D × H): 2,380 × 1,310 × 1,480 mm

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Bwodpfx Afsrfclqsgsu Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. Bedev Tadwepfx Afgewu HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. SPEED VARIATOR WITH INVERTER

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Bwodpfx Asubztkefgeu Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 Bwedpfou Dw I Eex Afgou - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the Bjdpfx Afszq Ez Ssgowu fence

Condition: used, mileage: 263,844 km, power: 338 kW (459.55 HP), first registration: 09/2007, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: yellow, gearing type: semi-automatic, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Internal vehicle number: VTC30034 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) Bjdpfey Ngmisx Afgjwu * Viktoria Sologubova (Polish, Russian, Ukrainian, English) MERCEDES BENZ ACTROS 2646 6x4 concrete pump Putzmeister BSF 36-4.16 Permissible total weight 27,000 kg 5 operating hours Final hose, max. 4 m Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, functionality: fully functional, machine/vehicle number: G36W05, overall weight: 39 kg, operating pressure: 248 bar, compressed air connection: 7 bar, 36:1-Mercury Pump: - Wall-mounted - Includes suction hose, material filter Bwsdezwb Nrepfx Afgeu - Permissible material operating pressure: 248 bar - Max. material flow rate: 6 l/min. Graco spray guns in our clearance sale: We need space and are therefore offering this and other selected Graco Mercury pumps at particularly attractive clearance prices. If you are interested, we will be happy to assist you. Notes on the sale: Sale exclusively to business customers. No sale to private customers. Sale and delivery exclusively within the EU – no sale to third countries. Delivery conditions and shipping costs will be determined individually based on effort and agreement. The sale is made with the exclusion of any warranty. Are you looking for other machines or similar products? Please feel free to contact us. At Oltrogge, we regularly have a wide range of new and used machines as well as other products from our technical range available. We will be happy to check if we can offer you a suitable alternative.

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain Bwedpoy Tyyqsfx Afgsu - some jaws

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 415514, Title: Potain Igo 36 Quick-Erection Crane – Good Condition (no current inspection) We are selling a Potain Igo 36 quick-erection crane due to a fleet change. The crane is in good, functional condition with the usual, age-related signs of wear. It has been used regularly and well maintained. Note: The DGUV inspection (UVV) as well as a TÜV inspection for a possible undercarriage are currently expired and must be renewed by the buyer. Technical data: • Max. lifting capacity: 4,000 kg (up to 11.0 m outreach) • Max. outreach: 32.0 m (lifting capacity at the jib tip: 1,000 kg) • Hook height: 22.0 m (horizontal jib position) • Jib inclination: Up to 30° possible • Slewing radius: 2.05 m • Drive: Frequency-controlled drives • Power connection: 400 V Condition & Scope of supply: • Overall condition: Good, immediately ready for operation (after acceptance). Bedpszy U Akofx Afgowu • Inspections: No current DGUV / TÜV inspection. • Control: Wireless remote control and cable remote control available. • Ballast: Complete counterweight is included in the scope of supply. Sale and handling: • Location: Construction site in Karlsruhe • Inspection: An inspection is possible after prior appointment. • Handover: The sale is made at the location in its current condition as seen, with exclusion of warranty (B2B). Dismantling, loading and transport are to be organized by the buyer.

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Bedpszu S Adofx Afgewu

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; Bwjdpfx Afjmcw S Sjgeu UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: used, For sale: a demountable warehouse with loading docks of approximately 234 m², located in Dordrecht. A practical and versatile commercial space that is ideally suited for transport, distribution, storage, or expansion of your current business activities. 🔧 Demountable & flexible The building is constructed as a demountable steel structure, offering an interesting solution for entrepreneurs looking for a flexible commercial space. ⚠️ Please note: the sale only includes the demountable commercial building. No land or plot is included. 📐 Dimensions • Length: 36 meters Bedpezx Sd Nefx Afgowu • Width: 6.5 meters • Area: approx. 234 m² • Ridge height: 4.30 meters • Eave height: 4.00 meters 🚛 Equipped with excellent loading and unloading facilities • Steel structure • 8 roller shutter doors of 3 x 3 meters • 8 loading bays / loading docks • Loading docks equipped with flaps • Impact protection • Shock absorbers 💼 Ideal for ✔️ Transport companies ✔️ Logistics & distribution ✔️ Storage ✔️ Entrepreneurs looking for extra commercial space ✔️ Expansion of existing business activities Practical, spacious, and immediately ready for use. With 8 loading docks and 8 roller shutter doors, this building offers ample opportunities for companies where efficient loading and unloading is a priority. 📍 Dordrecht Interested? Contact us for more information or to arrange a viewing. 📩 Send a non-binding message for more information!

Condition: used, Year of construction: 2021, Year: 2021 Condition: very good Counter: approx. 3,640,000 Technical Specification: - Min./Max. sheet size: 80 × 100 mm / 360 × 650 mm (optional extended feeder: up to 360 × 850 mm) - Paper weight range: 80–400 g/m² - Programs: 20 programmable jobs - Minimum crease distance: 0.1 mm - Speed: up to 6,000 sheets per hour (A4 with 1 crease) - Power supply: 230 V / 50 Hz single phase - Power consumption: 1.5 kW - Weight: 116 kg - Dimensions: 40 × 65 × 116 cm - Optional accessories: perforation kit; extended feeder Equipment Description: The PIT STOP 36 is an automatic creasing and perforating machine with a working width of 36 cm, maintaining all the reliability and precision characteristics typical of machines manufactured by Bacciottini Group. Bsdpsz Hcq Hefx Afgowu The standard sheet size is 360 × 650 mm, with an optional extended feeder allowing processing of sheets up to 360 × 850 mm. The machine has been specially designed for print-on-demand applications and digital printing workflows. It is equipped with a creasing system using an adhesive matrix. The machine features a user-friendly 7-inch colour touchscreen display, allowing quick and easy setup of all creasing and perforating operations. The unit is mounted on wheels for easy mobility and helps maximize workspace efficiency, especially in areas where space is limited.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Bedpfxjz Engko Afgowu Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 12,527 h, load capacity: 3,600 kg, lifting height: 4,700 mm, free lift: 1,570 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, fork carriage width: 1,020 mm, fork length: 1,300 mm, empty load weight: 5,420 kg, total length: 2,750 mm, drive type: Treibgas, construction width: 1,200 mm, Internal combustion forklift Bwedpfx Afsz H E Tdjgeu Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Automatic Technical condition: good Front tire type: Solid tires Front tire size: 2 x 22x9x16 Front tire condition: 0 - 20% Rear tire type: Solid tires Rear tire size: 2 x 18x6x12 Rear tire condition: 0 - 20% Battery year of manufacture: 2009 Additional single hydraulic circuit, side shifter, overhead guard, load backrest, lighting according to StVZO (German Road Traffic Regulations).

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Bedpfezvgvnjx Afgewu Mill with countershaft drive but could be converted to gearbox.

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: Bwedsxyxr Nspfx Afgeu 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, operating hours: 5,512 h, load capacity: 200 kg, mast type: telescopic, lifting height: 35,500 mm, lifting power: 200 kg/m, platform length: 1,200 mm, platform width: 1,200 mm, overall weight: 4,900 kg, transport length: 8,018 mm, transport width: 1,580 mm, transport height: 1,980 mm, construction height: 1,980 mm, fuel type: diesel, fuel tank capacity: 70 l, Equipment: UVV, Teupen Leo 36 T / Tracked Aerial Work Platform — Kubota diesel or 230V electric operation -white rubber tracks 85% automatic hydraulic stabilizing function -basket and basket arm as new -new electric motor -radio remote control with new batteries -diesel engine recently serviced -hydraulic oil and hoses as new -including manufacturer's report on machine condition -new inspection/ UVV Bwedpfxoyxw Hfs Afgsu

Condition: used, mileage: 1,397 km, first registration: 06/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: crane, soot filter, * Böcker RK 36-2400 crawler crane * Year of manufacture: 2016 * Operating hours: 1,390 h * ??UVV inspection NEW?? * ??Service NEW?? * ??Winch NEW?? * More pictures and videos available via WhatsApp Bwedpfx Afozlwf Eogju * Information without guarantee and subject to prior sale.

Condition: good (used), Year of construction: 2001, VICTOR V TURN 36 HYD 3 JAW CHUCK TAILSTOCK 2 AXIS 750 CENTRES Bwodpfezhwufsx Afgou SWARF CONVEYOR YEAR 2001

Condition: used, mileage: 1,397 km, first registration: 06/2016, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, crane, electronic stability program (ESP), soot filter, * Böcker RK 36-2400 crawler crane * Year of manufacture: 2016 Bwedezlwfxopfx Afgeu * Operating hours: 1,390 h * ??UVV inspection NEW?? * ??Service NEW?? * ??Winch NEW?? * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Bedpfxozc D Dke Afgowu Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.